Cisco 200-301 Online Practice Questions and Exam Preparation

Cisco 200-301 Online Questions & Answers

• Question 1461:

  An engineer requires a scratch interface to actively attempt to establish a trunk link with a neighbor switch. What command must be configured?

  A. switchport mode trunk
  B. switchport mode dynamic desirable
  C. switchport mode dynamic auto
  D. switchport nonegotiate
  B. switchport mode dynamic desirable

  ---

  Ref: Dynamic Trunking Protocol ?Wikipedia

  Switch port modes

  ...

  Dynamic Auto -- Makes the Ethernet port willing to convert the link to a trunk link. The port becomes a trunk port if the neighboring port is set to trunk or dynamic desirable mode. This is the default mode for some switchports. Dynamic Desirable -- Makes the port actively attempt to convert the link to a trunk link. The port becomes a trunk port if the neighboring Ethernet port is set to trunk, dynamic desirable or dynamic auto mode.

  ..."

• Question 1462:

  Which interface condition is occurring in this output?

  

  A. collisions
  B. broadcast storm
  C. duplex mismatch
  D. queueing
  C. duplex mismatch

• Question 1463:

  Refer to exhibit.

  

  Which statement explains the configuration error message that is received?

  A. It belongs to a private IP address range.
  B. The router does not support /28 mask.
  C. It is a network IP address.
  D. It is a broadcast IP address.
  D. It is a broadcast IP address.

  ---

• Question 1464:

  Refer to the exhibit.

  

  Router R14 is in the process of being configured. Which configuration must be used to establish a host route to PC 10?

  A. ip route 10.80.65.10 255.255.255.254 10.80.65.1
  B. ip route 10.8065.10 255.255.255.255 10.73.65.66
  C. ip route 1073.65.65 255.0.0.0 10.80.65.10
  D. ip route 10.73.65.66 0.0.0.255 10.80.65.10
  B. ip route 10.8065.10 255.255.255.255 10.73.65.66

• Question 1465:

  Which Rapid PVST+ feature should be configured on a switch port to immediately send traffic to a connected server as soon as it is active?

  A. portfast
  B. uplinkfast
  C. BPDU guard
  D. loop guard
  A. portfast

• Question 1466:

  Which WPA mode uses PSK authentication?

  A. Local
  B. Personal
  C. Enterprise
  D. Client
  B. Personal

  ---

  WPA2-Personal, also known as WPA2-PSK (Pre-Shared Key), uses PSK authentication. PSK authentication is a method where a pre-shared key (a password or passphrase) is shared between the wireless access point (AP) and the client devices.

  In WPA2-Personal/PSK mode, all client devices connecting to the wireless network must use the same pre-shared key to authenticate and access the network. This key is manually configured on both the AP and the client devices. The pre-shared key is used as a shared secret to generate encryption keys for securing the wireless communications.

• Question 1467:

  Refer to the exhibit.

  

  Which two values does router R1 use to determine the best path to reach destinations in network 1,0.0.0/8? (Choose two.)

  A. longest prefix match
  B. highest administrative distance
  C. highest metric
  D. lowest metric
  E. lowest cost to reach the next hop
  A. longest prefix match
  D. lowest metric

  ---

• Question 1468:

  What must be considered before deploying virtual machines?

  A. resource limitations, such as the number of CPU cores and the amount of memory
  B. support for physical peripherals, such as monitors, keyboards, and mice
  C. whether to leverage VSM to map multiple virtual processors to two or more virtual machines
  D. location of the virtual machines within the data center environment
  A. resource limitations, such as the number of CPU cores and the amount of memory

• Question 1469:

  How must a switch interface be configured when an AP is in FlexConnect mode?

  A. access port
  B. EtherChannel
  C. PoE port
  D. trunk port
  D. trunk port

  ---

  Trunk. Since it puts the traffict directly on the switch in flexconnect mode it and it supports multiple vlans it needs to put it on the proper vlan.

• Question 1470:

  DRAG DROP

  Drag and drop the elements of a security program from the left onto the corresponding descriptions on the right.

  Select and Place: