Cisco 200-301 Online Practice Questions and Exam Preparation

Cisco 200-301 Online Questions & Answers

• Question 1051:

  Refer to the exhibit. Only four switches are participating in the VLAN spanning-tree process.

  

  Branch-1 priority 614440 Branch-2: priority 39082416 Branch-3: priority 0 Branch-4: root primary

  Which switch becomes the permanent root bridge for VLAN 5?

  A. Branch-1
  B. Branch-2
  C. Branch-3
  D. Branch-4
  C. Branch-3

  ---

  Dynamic ARP inspection is an ingress security feature; it does not perform any egress checking.

• Question 1052:

  Which interface is used to send traffic to the destination network?

  O 10.76.170 161/26 |110/102] via FO/17.

  O 10.76.170 161/26[110/27e31] via FO/2 0.

  R 10.76.170.161/261120/15] via FO/8

  R 10.76.170.161/26 [120/10] via FO/12.

  A. F0/8
  B. FO/20
  C. FO/12
  D. FO/17
  B. FO/20

• Question 1053:

  Refer to the exhibit. A network associate has configured OSPF with the command:

  City(config-router)# network 192.168.12.64 0.0.0.63 area 0

  After completing the configuration, the associate discovers that not all the interfaces are participating in OSPF. Which three of the interfaces shown in the exhibit will participate in OSPF according to this configuration statement? (Choose three.)

  

  A. FastEthernet0 /0
  B. FastEthernet0 /1
  C. Serial0/0
  D. Serial0/1.102
  E. Serial0/1.103
  F. Serial0/1.104
  B. FastEthernet0 /1
  C. Serial0/0
  D. Serial0/1.102

  ---

  The "network 192.168.12.64 0.0.0.63 equals to network 192.168.12.64/26. This network has:

  1. Increment: 64 (/26= 1111 1111.1111 1111.1111 1111.1100 0000) + Network address:192.168.12.64

  2. Broadcast address: 192.168.12.127

  Therefore all interface in the range of this network will join OSPF.

• Question 1054:

  In which way does generative AI aid network simulations?

  A. It computes optimal data storage solutions.
  B. It creates synthetic network configurations.
  C. It produces a greenfield network design.
  D. It deploys network firmware updates.
  B. It creates synthetic network configurations.

• Question 1055:

  Refer to the exhibit.

  

  A newly configured PC fails to connect to the internet by using TCP port 80 to www.cisco.com. Which setting must be modified for the connection to work?

  A. Subnet Mask
  B. DNS Servers
  C. Default Gateway
  D. DHCP Servers
  C. Default Gateway

  ---

  10.2.2.0/29, 10.2.2.0 - 10.2.2.7, the current config is 10.2.2.10, which is out of range, and needs to be changed

• Question 1056:

  What is a practice that protects a network from VLAN hopping attacks?

  A. Enable dynamic ARP inspection
  B. Configure an ACL to prevent traffic from changing VLANs
  C. Change native VLAN to an unused VLAN ID
  D. Implement port security on internet-facing VLANs
  C. Change native VLAN to an unused VLAN ID

• Question 1057:

  Drag and Drop

  Drag and drop the IPv6 addresses from the left onto the corresponding address types on the right.

  Select and Place:

  

  

• Question 1058:

  Where does wireless authentication happen?

  A. SSID
  B. radio
  C. band
  D. Layer 2
  D. Layer 2

• Question 1059:

  An organization has implemented Cisco Firepower without IPS capabilities and now wants to enable inspection for their traffic. They need to be able to detect protocol anomalies and utilize the Snort rule sets to detect malicious behavior. How is this accomplished?

  A. Modify the network discovery policy to detect new hosts to inspect.
  B. Modify the access control policy to redirect interesting traffic to the engine.
  C. Modify the intrusion policy to determine the minimum severity of an event to inspect.
  D. Modify the network analysis policy to process the packets for inspection.
  D. Modify the network analysis policy to process the packets for inspection.

  ---

  https://www.cisco.com/c/en/us/td/docs/security/firepower/670/fdm/fptd-fdm-config-guide-670/fptd-fdm-intrusion.html

• Question 1060:

  Which option best describes an API?

  A. A contract that describes how various components communicate and exchange data with each other.
  B. an architectural style (versus a protocol) for designing applications;
  C. a stateless client-server model
  D. request a certain type of data by specifying the URL path that models the data
  A. A contract that describes how various components communicate and exchange data with each other.