NetApp NS0-509 Online Practice Questions and Exam Preparation

NetApp NS0-509 Online Questions & Answers

• Question 81:

  An administrator has six VMware hosts, each with dual HBAs that are connected to a dual fabric using single initiator multiple target zoning. Four nodes are being added to the existing 4-node ONTAP cluster. In this scenario, what is the minimum number of FC zones that need to be updated on each fabric switch?

  A. 6
  B. 8
  C. 4
  D. 2
  B. 8

• Question 82:

  A customer has multiple host applications that require FC block storage. You need to gather and validate the customer's requirements for a supported NetApp solution. Which two tools would be used to accomplish this task? (Choose two.)

  A. Interoperability Matrix Tool (IMT)
  B. OneCollect
  C. Config Advisor
  D. Hardware Universe (HWU)
  A. Interoperability Matrix Tool (IMT)
  D. Hardware Universe (HWU)

• Question 83:

  You must relocate a LUN from one AFF A700 HA pair to another AFF A300 HA pair while preserving all storage efficiencies. What are two ways to accomplish this task? (Choose two.)

  A. Copy the volume.
  B. Copy the LUN.
  C. Move the volume.
  D. Move the LUN.
  A. Copy the volume.
  B. Copy the LUN.

• Question 84:

  A customer recently added two nodes with FC ports to a 4-node cluster.

  Which SVM configuration is needed before the customer creates LUNs on the new nodes?

  A. The FC service needs to be enabled on the data SVM.
  B. The existing LIFs need to be migrated to the new nodes.
  C. New FC LIFs need to be created on the cluster SVM.
  D. New FC LIFs need to be created on the new nodes.
  D. New FC LIFs need to be created on the new nodes.

• Question 85:

  You want to connect a NetApp AFF A700 to a 32 Gb FC switch. The ports need to connect at 32 Gb speed. In this scenario, which statement is correct?

  A. The AFF A700 includes FC ports natively on the controller.
  B. The AFF A700 includes an additional FC I/O module that is already populated in each controller.
  C. You need to purchase a two-port or four-port unified I/O module that enables FC and Ethernet connectivity.
  D. You need to purchase a two-port or four-port FC I/O module.
  C. You need to purchase a two-port or four-port unified I/O module that enables FC and Ethernet connectivity.

• Question 86:

  Click the Exhibit button.

  

  A 4-node cluster was expanded with two news nodes (Nodes 5 and 6). You are now attempting to set up four FC LUNs on the two new nodes that use the ps2 igroup name, although FC ping works. LUNs on the previous four nodes are discoverable, but the four new LUNs on the new controllers are not discoverable.

  Referring to the exhibit, what is the problem?

  A. The zones between the hosts and LIFs are from node-05 and node-06.
  B. Selective LUN Mapping (SLM) is not configured for this HA pair.
  C. The portset must be configured to reflect Nodes 5 and 6.
  D. Igroup ps2 has the portset configured with the LIFs.
  C. The portset must be configured to reflect Nodes 5 and 6.

• Question 87:

  You have inherited a small FC SN infrastructure that consists of 15 servers (hosts), two Cisco MDS 9148s switches, and a 4-node NetApp AFF A300 cluster. You suspect that your predecessor did not configure zoning according to best

  practices.

  In this scenario, what information is necessary to audit your SAN zoning? (Choose two.)

  A. SVM WWNNs
  B. SVN LIF WWPNs
  C. Controller port WWPNs
  D. Host GBA WWPNs
  B. SVN LIF WWPNs
  D. Host GBA WWPNs

• Question 88:

  An administrator needs to determine the maximum volume size that is supported per operating system. Which resource has this information?

  A. Config Advisor
  B. OneCollect
  C. Interoperability Matrix Tool (IMT)
  D. Hardware Universe (HWU)
  C. Interoperability Matrix Tool (IMT)

• Question 89:

  You have a 4-node FAS8200 A300 cluster that are using ONTAP 9.3 default settings. For faster performance, you move a volume with LUNs from a node on the FAS8200 to a node on the AFF A300. You determine that your SAN host is still using all active/optimized FC paths to the FAS8300 HA pair. What do you need to troubleshoot to move all active/optimized FC paths to the AFF A300 HA pair?

  A. reporting nodes list
  B. host MPIO and ALUA
  C. LUN mapping
  D. igroup WWPNs
  A. reporting nodes list

• Question 90:

  Click the Exhibit button.

  

  Referring to the exhibit, what happens when you change the type for port 1a from target to initiator?

  A. The port type for 1a changes to initiator, and you must reboot the controller for the changes to take effect.
  B. You receive an error message that you must take ports 1a and 1b offline before you can change the type.
  C. B. You receive an error message that you must take the port 1a offline before you can change the type.
  D. The port type for 1a and 1b changes to initiator, and you must reboot the controller for the changes to take effect.
  A. The port type for 1a changes to initiator, and you must reboot the controller for the changes to take effect.