NetApp NS0-509 Online Practice Questions and Exam Preparation

NetApp NS0-509 Online Questions & Answers

• Question 91:

  Click the Exhibit button.

  

  Referring to the exhibit, what is the problem with switch port 0?

  A. The transmit and receive links were switched.
  B. The SFP+ is faulty.
  C. The receive power is lower.
  D. The link is not connected.
  C. The receive power is lower.

• Question 92:

  While expanding a 200 GB LUN in an ONTAP 9.4 system, the following error is observed:

  

  What is the cause of this error?

  A. The volume auto-grow is disabled.
  B. The LUN reached maximum capacity.
  C. The LUN can be expanded up to 10 times its original size.
  D. Space reservation is enabled.
  A. The volume auto-grow is disabled.

• Question 93:

  Which path selection policy is used by Windows Servers using NetApp LUNs that are greater than 2 TB?

  A. Least Queue Depth
  B. Round Robin
  C. Round Robin with Subset Policy
  D. Least Weighted Paths
  C. Round Robin with Subset Policy

• Question 94:

  A customer wants to move its iSCSI SAN data from the edge locations into the cloud for data analytics, while keeping the ability to access modify the data. Which two combined solutions meet the customer's requirements in this scenario? (Choose two.)

  A. Use Microsoft Azure compute resources to access the near cloud AFF SnapMirror data for analytics.
  B. Deploy ONTAP Cloud at edge locations find use SnapVault to move the data into an AFF on- premises data center.
  C. Deploy ONTAP Select at edge locations and use SnapMirror to move the data to AFF near cloud with the NetApp Private Storage (NPS) service.
  D. Use Amazon Web Services (AWS) compute resources to access ONTAP Select data at the edge office locations for analytics.
  A. Use Microsoft Azure compute resources to access the near cloud AFF SnapMirror data for analytics.
  D. Use Amazon Web Services (AWS) compute resources to access ONTAP Select data at the edge office locations for analytics.

• Question 95:

  You need to configure iSCSI on your existing ONTAP cluster in a new SVM. The iSCSI LUNs will be served over a new Layer 2 network using the same physical ports that also use the CIFS protocol on a different SVM. Which two actions should you perform to accomplish this task? (Choose two.)

  A. Create a new portset.
  B. Create a new VLAN.
  C. Create a new broadcast domain.
  D. Create a new AD object.
  B. Create a new VLAN.
  C. Create a new broadcast domain.

• Question 96:

  Your server administrator upgraded a Windows 2016 Server from 16 Gb to 32 Gb HBAs. The application owner is now reporting slower performance to the AFF A700. Which two actions will help troubleshoot performance on the server? (Choose two.)

  A. Verify the HBA model using Hardware Universe.
  B. Verify the HBA firmware using the Interoperability Matrix Tool.
  C. Confirm that LUN mapping exists.
  D. Confirm that Windows Host Utilities Is installed.
  A. Verify the HBA model using Hardware Universe.
  B. Verify the HBA firmware using the Interoperability Matrix Tool.

• Question 97:

  Click the Exhibit button.

  

  You configured a SAN host with a 4-node ONTAP 9.5 cluster that uses default settings. All paths are available from the host to the four nodes. You have a requirement to see only two paths to each LUN. One path is optimized and the other is non-optimized.

  In this scenario, which NetApp SAN feature supports this requirement?

  A. portsets
  B. SLM
  C. VLANs
  D. igroups
  C. VLANs

• Question 98:

  Click the Exhibit button.

  

  A customer needs to change ports 0e and 0f on AFF_1 to support FC.

  Referring to the exhibit, which three steps are required to accomplish this task? (Choose three.)

  A. Issue the ucadmin modify -node AFF_1 -adapter 0e -mode FC -type target command.
  B. Issue the ucadmin modify -node AFF_1 -adapter 0e -mode FC -type initiator command.
  C. Restart the FC service.
  D. Take ports 0e and 0f offline.
  E. Reboot the node.
  B. Issue the ucadmin modify -node AFF_1 -adapter 0e -mode FC -type initiator command.
  C. Restart the FC service.
  D. Take ports 0e and 0f offline.

• Question 99:

  You deployed a new SVM for FC access, and you used the vserver fcr, create -vserver svm1 - status-admin up command to enable FC service on the SVM. You then created the LIFs for the FC protocol. When you review the status of the LIFs, they show that the admin status is up, but the operational status is down. You have already verified that the ports are physically connected.

  In this scenario, what is the next step to bring the LIFs up?

  A. Use the network interface modify command to change the operational status of the LIFs.
  B. Create at least one zone that contains your SVM LIF WWPNs and an initiator.
  C. Verify that an FC license is applied on your system.
  D. Disable the SAN switch port where your NetApp storage is connected.
  B. Create at least one zone that contains your SVM LIF WWPNs and an initiator.

• Question 100:

  You are setting up FC ports and must configure the speeds for both the SAN and the host ports. In this scenario, which statement is correct?

  A. Set the target port speed higher than the switch port speed.
  B. Set the target port speed to auto-negotiation.
  C. Set the target port speed to match the switch port speed.
  D. Set the target port speed lower than the switch port speed.
  B. Set the target port speed to auto-negotiation.