NetApp NS0-509 Online Practice Questions and Exam Preparation

NetApp NS0-509 Online Questions & Answers

• Question 71:

  You have a thin-provisioned LUN that was created by using the lun create -vserver vs1 -path /vol/vol1/lun1 -size 500G -ostype windows_2008 -space-reserve disabled -space-allocation disabled command. You verify that your Windows 2016 host reports 200 GB free on lun1. However, lun1 shows 0 bytes free on the storage cluster.

  What should you do to solve this problem?

  A. Change the LUN -space-allocation parameter to enabled.
  B. Change the LUN -ostype parameter to windows_gpt.
  C. Change the LUN -space-reserve parameter to enabled.
  D. Rescan the LUN disk in your Windows host so that it will notify NetApp about the free space.
  D. Rescan the LUN disk in your Windows host so that it will notify NetApp about the free space.

• Question 72:

  Which formula is appropriate for calculating target port Queue Depth?

  A. The number of LIFs using a physical port * 256
  B. The sum of the Queue Depth setting for all hosts using a physical port
  C. The number of LIFs using the physical port * Maximum Host HBA Queue Depth setting
  D. The number of physical ports * 2048
  C. The number of LIFs using the physical port * Maximum Host HBA Queue Depth setting

• Question 73:

  An administrator is asked to configure NVMe on an ONTAP 9.5 cluster for host access. Which three steps must the administrator perform to accomplish this task? (Choose three.)

  A. Create a namespace.
  B. Provision a subsystem.
  C. Configure the FC port.
  D. Gather the IQN from the host initiator software.
  E. Gather the NQN from the host system.
  A. Create a namespace.
  B. Provision a subsystem.
  E. Gather the NQN from the host system.

• Question 74:

  Click the Exhibit button.

  

  You connected your FAS8200 to a Brocade SAN switch. As shown in the exhibit, port 0e is not available. In this scenario, which statement is correct?

  A. The incorrect SFP+ module is installed.
  B. The switch zoning is using the FC nodename.
  C. The incorrect firmware revision is installed.
  D. The switch port is configured for mode E_Port.
  D. The switch port is configured for mode E_Port.

• Question 75:

  A customer is planning to connect a Linux server to a FAS8200 using Brocade FC switches. During the initial configuration, the SVM does not log in to the fabric. Which two statements are correct in this scenario? (Choose two.)

  A. NPIV has not been enabled on the switches.
  B. The switch port topology is set incorrectly to the E_Port.
  C. ALUA has not been set up on the FAS8200.
  D. Zoning is incorrectly configured between the Linux server and the ONTAP cluster.
  A. NPIV has not been enabled on the switches.
  C. ALUA has not been set up on the FAS8200.

• Question 76:

  An administrator needs to connect a new VMware 6.5 cluster to an ONTAP cluster for iSCSl connectivity. Which two steps would accomplish this task? (Choose two.)

  A. Enable iSCSl adapters on the ESXi hosts.
  B. Install the Virtual Storage Console for VMware vSphere.
  C. Configure zoning for the HBAs and the ONTAP data LIFs.
  D. Configure ALUA on the ONTAP SVM.
  A. Enable iSCSl adapters on the ESXi hosts.
  D. Configure ALUA on the ONTAP SVM.

• Question 77:

  Exhibit.

  

  You need to configure the SnapCenter Plug-in for VMware vSphere to back up and restore VMware datastores. Referring to the exhibit, which additional LIF type should you create before you configure the plug- in?

  A. intercluster
  B. node management
  C. SVM management
  D. cluster management
  C. SVM management

• Question 78:

  You are planning to expand a SAN-only ONTAP 9.5 cluster that consists of eight AFF A700 nodes. In this scenario, what is the maximum number of additional AFF A700 nodes that would be added?

  A. 2
  B. 4
  C. 8
  B. 4

• Question 79:

  Which data collection tool would be used for obtaining detailed information about hosts that are attached to ONTAP storage?

  A. Upgrade Advisor
  B. OneCollect
  C. Brocade Network Advisor
  D. Conflg Advisor
  B. OneCollect

• Question 80:

  Click the Exhibit button.

  

  The LUN that is shown in the exhibit is mounted by a Windows 2016 server. In this scenario, which two statements are correct? (Choose two.)

  A. The LUN has misaligned I/O.
  B. The LUN has aligned I/O.
  C. The LUN's space is reserved.
  D. The LUN's space is not reserved.
  B. The LUN has aligned I/O.
  D. The LUN's space is not reserved.