NetApp NS0-504 Online Practice Questions and Exam Preparation

NetApp NS0-504 Online Questions & Answers

• Question 121:

  Which command do you use on a Cisco switch to view the currently active zoneset?

  A. show zone analysis
  B. show zoneset active
  C. show running-config
  D. show config active
  B. show zoneset active

• Question 122:

  To operate Data ONTAP 8.1 Cluster-Mode SAN, what must be configured on both the initiator and target?

  A. Logical Unit Access Initialization
  B. Physical Unit Access Initialization
  C. Symmetric Logical Unit Access
  D. Asymmetric Logical Unit Access
  E. SAN Access Initialization Protocol
  D. Asymmetric Logical Unit Access

• Question 123:

  What security mechanism can an administrator use on an OSSV client to use permissions allowing backup to a SnapVault secondary system?

  A. MD5 authentication between SnapVault primary and secondary, with changeable password
  B. Contents inside file called access and located in OSSV /snapvault/etc
  C. QSM access list modifiable via svconfigurator
  D. Via /etc/hosts.equiv file
  C. QSM access list modifiable via svconfigurator

• Question 124:

  A dual controller FAS3100 series is connected to a dual fabric with two active target ports per fabric in a singleimage cfmode, and uses a single portset.

  What is the number of paths for ten LUNs on a single host with one connection to each fabric?

  A. 10
  B. 20
  C. 30
  D. 40
  E. 80
  D. 40

• Question 125:

  Identify the two commands that could be entered on the SnapMirror destination storage system. (Choose two.)

  A. snapmirror resync
  B. snapmirror release
  C. snapmirror initialize
  D. options snapmirror.access on
  A. snapmirror resync
  C. snapmirror initialize

• Question 126:

  What are three true statements about physical reallocation of data added in ONTAP 7.3? (Choose three.)

  A. Use reallocate -p pathname to run the physical reallocate.
  B. Use aggr reallocate -p pathname to run the physical reallocate.
  C. Reinitialize any SnapMirror relationship for the new physical geometry.
  D. Volume Snapshots do not need to be deleted for the reallocate to run effectively.
  E. Dont run it on files, volumes, and LUNs that are in an aggregate created by a version of ONTAP earlier than 7.2.
  A. Use reallocate -p pathname to run the physical reallocate.
  D. Volume Snapshots do not need to be deleted for the reallocate to run effectively.
  E. Dont run it on files, volumes, and LUNs that are in an aggregate created by a version of ONTAP earlier than 7.2.

• Question 127:

  The NetApp storage solution diagram for installation should include which three pieces of information (choose three.)

  A. Power Feeds to all components to PDU's and UPS's
  B. Floor tile grid for airflow for air conditioning
  C. Path for movement of equipment in Data Center
  D. Application storage usage by controller
  E. Connectivity to switches - both Ethernet and FCP
  F. Storage cabling, from the storage controllers to switches
  A. Power Feeds to all components to PDU's and UPS's
  E. Connectivity to switches - both Ethernet and FCP
  F. Storage cabling, from the storage controllers to switches

• Question 128:

  A LIF must be created for every occurrence of a __to follow NetApp's best practices.

  A. Ethernet port on a controller
  B. File
  C. LUN
  D. Volume
  E. Vserver
  F. FC port on a controller
  D. Volume

• Question 129:

  To automatically export volumes and directories on storage system reboot, include them in the /etc/exports file.

  A. True
  B. False
  A. True

• Question 130:

  Which two technologies are required for FCoE? (Choose two.)

  A. Lossless Ethernet
  B. FC-IPS
  C. iSNS
  D. DCB
  E. DHCP
  A. Lossless Ethernet
  D. DCB