NetApp NS0-504 Online Practice Questions and Exam Preparation

NetApp NS0-504 Online Questions & Answers

• Question 141:

  Which three are pre-requisites for using SnapRestore? (Choose three.)

  A. The volume to be reverted must be offline.
  B. The volume to be reverted must not be a SnapMirror destination.
  C. You must enter the SnapRestore license code before you can use it.
  D. Snapshot copies must exist on the storage system so that you can select a snapshot for the reversion.
  B. The volume to be reverted must not be a SnapMirror destination.
  C. You must enter the SnapRestore license code before you can use it.
  D. Snapshot copies must exist on the storage system so that you can select a snapshot for the reversion.

• Question 142:

  The snapvault restore command is run on the _________.

  A. secondary system to push data to the primary system
  B. primary system to pull data from the secondary system
  C. secondary system to pull data from the primary system
  D. secondary system to push data to the primary storage system
  B. primary system to pull data from the secondary system

• Question 143:

  Which statement best describes the output of this command? sysstat -s 5

  A. Display the default output every five seconds and terminate after five counts.
  B. Display extended output every five seconds and print a summary after five counts.
  C. Display extended output every five seconds and print a summary upon termination.
  D. Display the default output every five seconds and print a summary upon termination.
  D. Display the default output every five seconds and print a summary upon termination.

• Question 144:

  After issuing the aggr split aggr0/plex0 aggrNew command ____________.

  A. there is a new plex called aggrNew
  B. there are two new plexes, plex0 and plexNew
  C. there is a new mirrored aggregate called aggrNew
  D. there are two unmirrored aggregates, aggr0 and aggrNew
  E. flexible volumes are evenly split between aggr0 and aggrNew
  D. there are two unmirrored aggregates, aggr0 and aggrNew

• Question 145:

  In Data ONTAP 7.3, what is a portset bound to?

  A. a WWPN
  B. a LUN
  C. an igroup
  D. a volume
  C. an igroup

• Question 146:

  Which parameter must the cluster administrator properly define when configuring an iSCSI logical interface in Data ONTAP 8.1 Cluster-Mode and later?

  A. data-access
  B. data-address
  C. data-protocol
  D. data-routing
  E. No parameter needs to be defined as no additional parameter is required.
  C. data-protocol

• Question 147:

  What is the functionality of the latest Data ONTAP DSM for Windows?

  A. It can handle FCP and iSCSI paths to the same LUN.
  B. It allows you to take snapshots for both FCP and iSCSI LUNS.
  C. It allows you to enable ALUA on the igroup from the host.
  D. It allows you to create new LUNs from the host.
  A. It can handle FCP and iSCSI paths to the same LUN.

• Question 148:

  Physical Reallocation of a SnapMirror source volume increases the amount of data to transfer for the next SnapMirror update.

  A. True
  B. False
  B. False

• Question 149:

  Which command displays the disk ownership for both CPU modules in a FAS2020 system?

  A. disk own -s
  B. disk show -v
  C. vol status -r
  D. disk display r
  B. disk show -v

• Question 150:

  Which native GUI switch tool is used to manage Brocade switches and directors?

  A. SAN Manager
  B. Enterprise Fabric Services
  C. Device Manager
  D. Web Tools
  D. Web Tools