Which class of IP address provides a maximum of only 254 host addresses per network ID?
A. Class A
B. Class B
C. Class C
D. Class D
What is term for the hardware coded address found on an interface?
A. FQDN Address
B. IP Address
C. Interface Address
D. MAC Address
Consider a wireless access point with mode=ap-bridge. What is the maximum number of concurrent clients that can connect to it?
A. 2007
B. 2012
C. 2048
D. 1024
There are two wireless cards (wlan1 and wlan2) which are bridged together. On wlan1 card there is a setting "Forwarding=no". Choose the correct answer(s):
A. Stations on wlan2 will be able to communicate with stations on wlan2
B. Stations on wlan2 will be able to communicate with stations on wlan1
C. Stations on wlan1 will be able to communicate with stations on wlan1
D. To prevent communication between wlan1 and wlan2 one cannot use Bridge Filters
E. Stations on wlan1 will be able to communicate with stations on wlan2
In RouterOS queue configurations the word "total" ussually represents
A. download
B. upload + download
C. download - upload
D. upload
A routing table has following entries: 0 dst-address=10.0.0.0/24 gateway=10.1.5.126 1 dst-address=10.1.5.0/24 gateway=10.1.1.1 2 dst-address=10.1.0.0/24 gateway=25.1.1.1 3 dst-address=10.1.5.0/25 gateway=10.1.1.2 Which gateway will be used for a packet with destination address 10.1.5.126?
A. 10.1.1.1
B. 10.1.5.126
C. 10.1.1.2
D. 25.1.1.1
In the Route List, the identification DAb for a route stands for
A. direct - active - bgp
B. direct - acknowledge - backup
C. dynamic - active - backup
D. dynamic - active - bgp
What is necessary for PPPoE client configuration?
A. Interface (on which PPPoE client is going to work)
B. Static IP address on PPPoE client interface
C. ip firewall nat masquerade rule
Which one of the following is true regarding VLANs?
A. Two VLANs are configured by default on all Cisco switches.
B. VLANs only work if you have a complete Cisco switched internetwork. No off-brand switches are allowed.
C. You should not have more than 10 switches in the same VTP domain.
D. VTP is used to send VLAN information to switches in a configured VTP domain.
Which of the following allows a router to respond to an ARP request that is intended for a remote host?
A. Gateway DP
B. Reverse ARP (RARP)
C. Proxy ARP
D. Inverse ARP (IARP)
Nowadays, the certification exams become more and more important and required by more and more enterprises when applying for a job. But how to prepare for the exam effectively? How to prepare for the exam in a short time with less efforts? How to get a ideal result and how to find the most reliable resources? Here on Vcedump.com, you will find all the answers. Vcedump.com provide not only MikroTik exam questions, answers and explanations but also complete assistance on your exam preparation and certification application. If you are confused on your MTCNA exam preparations and MikroTik certification application, do not hesitate to visit our Vcedump.com to find your solutions here.