MikroTik MTCNA Online Practice Questions and Exam Preparation

MikroTik MTCNA Online Questions & Answers

• Question 111:

  Which of the following Routes statuses are possible?

  A. A = Active
  B. C = Connected
  C. S = Static
  D. D = Drop
  A. A = Active
  B. C = Connected
  C. S = Static

• Question 112:

  What protocols are used to configure trunking on a switch?

  1.

  VLAN Trunking Protocol

  2.

  VLAN

  3.

  802.1Q

  4.

  ISL

  A. 1 and 2
  B. 3 and 4
  C. 1 only
  D. 2 only
  B. 3 and 4

• Question 113:

  You want to transfer existing '/ip firewall filter' configuration from one router to a new system. Choose the best possible way to do:

  A. Export global configuration and remove everything apart from '/ip firewall filter'
  B. Export only '/ip firewall filter'
  C. Create backup, edit backup file and restore on target router
  D. Create backup only of '/ip firewall filter' rules
  B. Export only '/ip firewall filter'

• Question 114:

  Consider a wireless access point with mode=ap-bridge. What is the maximum number of concurrent clients that can connect to it?

  A. 2007
  B. 2012
  C. 2048
  D. 1024
  A. 2007

• Question 115:

  You have 10 users plugged into a hub running 10Mbps half-duplex. There is a server connected to the switch running 10Mbps half-duplex as well. How much bandwidth does each host have to the server?

  A. 100 kbps
  B. 1 Mbps
  C. 2 Mbps
  D. 10 Mbps
  D. 10 Mbps

• Question 116:

  Which firewall chain you should use to filter SSH access to the router itself?

  A. output
  B. input
  C. prerouting
  D. forward
  B. input

• Question 117:

  Which port does PPTP use by default?

  A. TCP 1721
  B. UDP 1723
  C. TCP 1723
  D. UDP 1721
  C. TCP 1723

• Question 118:

  The highest queue priority is

  A. 1
  B. 256
  C. 16
  D. 8
  A. 1

• Question 119:

  How often are BPDUs sent from a layer 2 device?

  A. Never
  B. Every 2 seconds
  C. Every 10 minutes
  D. Every 30 seconds
  B. Every 2 seconds

• Question 120:

  You want to use PCQ and allow 256k maximum download and upload for each client. Choose correct argument values for the required queue.

  A. kind=pcq pcq-rate=256000 pcq-classifier=src-address
  B. kind=pcq pcq-rate=1256000 pcq-classifier=dst-address
  C. kind=pcq pcq-rate=256000 pcq-classifier=dst-address
  D. kind=pcq pcq-rate=5000000 pcq-classifier=src-address
  E. kind=pcq pcq-rate=5000000 pcq-classifier=dst-address
  A. kind=pcq pcq-rate=256000 pcq-classifier=src-address
  C. kind=pcq pcq-rate=256000 pcq-classifier=dst-address