MTCNA Exam Details

  • Exam Code
    :MTCNA
  • Exam Name
    :MikroTik Certified Network Associate
  • Certification
    :MikroTik Certifications
  • Vendor
    :MikroTik
  • Total Questions
    :216 Q&As
  • Last Updated
    :May 25, 2026

MikroTik MTCNA Online Questions & Answers

  • Question 141:

    It is impossible to disable user "admin" at the menu "/user"

    A. True
    B. False

  • Question 142:

    Mark all packages required for PPPoE server on MikroTik RouterOS

    A. ppp
    B. user-manager
    C. radius
    D. synchronous
    E. system

  • Question 143:

    Using wireless connect-list it's possible to prioritize connection to one Access Point over another Access Point by changing the order of the entries.

    A. False
    B. True

  • Question 144:

    There can be more than one PPPoE server in a single broadcast domain:

    A. True
    B. False

  • Question 145:

    For a Simple Queue to apply a bandwidth restrictions on a bridged interface, following must be done:

    A. Configure an IP address on the bridge interface
    B. Use mangle to mark the connections
    C. Associate the Simple Queue to the bridge interface
    D. Enable 'Use IP Firewall' in bridge settings

  • Question 146:

    Select valid subnet masks:

    A. 255.192.0.0
    B. 255.255.192.255
    C. 192.0.0.0
    D. 255.255.224.0

  • Question 147:

    What does the passive command provide to dynamic routing protocols?

    A. Stops an interface from sending or receiving periodic dynamic updates.
    B. Stops an interface from sending periodic dynamic updates but not from receiving updates.
    C. Stops the router from receiving any dynamic updates.
    D. Stops the router from sending any dynamic updates.

  • Question 148:

    Consider the following network diagram. In R1, you have the following configuration: /ip route add dst-address=192.168.1.0/24 gateway=192.168.99.2 /ip firewall nat add chain=srcnat out-interface=Ether1 action=masquerade On R2, if you wish to prevent all access to a server located at 192.168.1.10 from LAN1 devices, which of the following rules would be needed?

    A. /ip firewall filter add chain=forward srcaddress=192.168.99.1 dst-address=192.168.1.10 action=drop
    B. /ip firewall filter add chain=forward srcaddress=192.168.0.0/24 dst-address=192.168.1.10 action=drop
    C. /ip firewall filter add chain=input srcaddress=192.168.99.1 dst-address=192.168.1.10 action=drop
    D. /ip firewall nat add chain=dstnat srcaddress=192.168.99.1 dst-address=192.168.1.10 action=drop

  • Question 149:

    What menus should be used to allow certain websites to be accessed from behind a Hot-Spot interface, without client authentication

    A. ip Hot-Spot ip-binding
    B. ip Hot-Spot profile
    C. ip Hot-Spot walled-garden
    D. ip Hot-Spot walled-garden ip

  • Question 150:

    Which is a default baud-rate of currently manufactured RouterBOARDs?

    A. 9600
    B. 115200
    C. 38400
    D. 11520

Tips on How to Prepare for the Exams

Nowadays, the certification exams become more and more important and required by more and more enterprises when applying for a job. But how to prepare for the exam effectively? How to prepare for the exam in a short time with less efforts? How to get a ideal result and how to find the most reliable resources? Here on Vcedump.com, you will find all the answers. Vcedump.com provide not only MikroTik exam questions, answers and explanations but also complete assistance on your exam preparation and certification application. If you are confused on your MTCNA exam preparations and MikroTik certification application, do not hesitate to visit our Vcedump.com to find your solutions here.