1. Home
  2. MikroTik
  3. MTCNA

MikroTik Certified Network Associate Exam

Exam Details

  • Exam Code
    :MTCNA
  • Exam Name
    :MikroTik Certified Network Associate Exam
  • Certification
    :MTCNA - MikroTik Training
  • Vendor
    :MikroTik
  • Total Questions
    :216 Q&As
  • Last Updated
    :Apr 23, 2024

MikroTik MTCNA - MikroTik Training MTCNA Questions & Answers

  • Question 1:

    If you wanted to delete the configuration stored in NVRAM, what would you type?

    A. erase startup

    B. erase nvram

    C. delete nvram

    D. erase running

  • Question 2:

    Which wireless mode allows you to connect to any standard AP (not only MikroTik) and to be able to bridge this wireless interface to an Ethernet?

    A. station-pseudobridge

    B. station

    C. station-wds

    D. bridge

  • Question 3:

    Is ARP used in the IPv6 protocol?

    A. True

    B. False

  • Question 4:

    When adding a static route, you must always ensure that you add both the gateway and the interface.

    A. False

    B. True

  • Question 5:

    The network address is

    A. The first address of the subnet

    B. The first usable address of the subnet

    C. The last address of the subnet

  • Question 6:

    Consider the following diagram. We want to communicate from a device on LAN1 to a device on LAN2. Assuming that all necessary configurations are already included on R2, which of the following configurations in R1 would enable this communication?

    A. /ip route add dst-address=192.168.1.0/24 src-address=192.168.0.0/24 gateway=192.168.99.2

    B. /ip route add dst-address=0.0.0.0/0 gateway=Ether1

    C. /ip route add dst-address=192.168.0.0/24 gateway=192.168.0.1

    D. /ip route add dst-address=192.168.1.0/24 gateway=192.168.99.2

    E. /ip route add dst-address=0.0.0.0/0 gateway=192.168.99.2

  • Question 7:

    Which firewall chain should you use to filter clients HTTP traffic going through the router?

    A. prerouting

    B. forward

    C. output

    D. input

  • Question 8:

    Which port does PPTP use by default?

    A. TCP 1721

    B. UDP 1723

    C. TCP 1723

    D. UDP 1721

  • Question 9:

    It is possible to create a configuration where VLAN and PPTP interfaces are bridged together.

    A. TRUE

    B. FALSE

  • Question 10:

    To block communications between wireless clients connected to the same access point interface, you should set

    A. 'default-forwarding=no'

    B. 'max-station-count=1'

    C. 'default-authentication=no'

    D. 'default-authentication=no' and 'default-forwarding=no'

Related Exams:

Tips on How to Prepare for the Exams

Nowadays, the certification exams become more and more important and required by more and more enterprises when applying for a job. But how to prepare for the exam effectively? How to prepare for the exam in a short time with less efforts? How to get a ideal result and how to find the most reliable resources? Here on Vcedump.com, you will find all the answers. Vcedump.com provide not only MikroTik exam questions, answers and explanations but also complete assistance on your exam preparation and certification application. If you are confused on your MTCNA exam preparations and MikroTik certification application, do not hesitate to visit our Vcedump.com to find your solutions here.