Microsoft MB7-849 Online Practice Questions and Exam Preparation

Microsoft MB7-849 Online Questions & Answers

• Question 31:

  In Microsoft Dynamics NAV 2009, you set up different levels of work facilities. What are the different work facility levels available?

  A. Work Center Groups, Machine Center Groups
  B. Work Centers, Machine Center Groups, Machine Centers
  C. Work Center Groups, Work Centers, Machine Centers
  D. Work Center Groups, Work Centers, Machine Center Groups, Machine Centers
  C. Work Center Groups, Work Centers, Machine Centers

• Question 32:

  When the Location Mandatory check box is selected in Inventory Setup, what other setup is necessary for planning to be accurate?

  A. A stockkeeping unit must be set up for each location where an item is planned.
  B. The planning worksheet must be set up for processing on a location basis.
  C. Item Cards must have the Location Code field populated.
  D. The Planning check box must be selected for the appropriate posting groups in Inventory Posting Setup.
  A. A stockkeeping unit must be set up for each location where an item is planned.

• Question 33:

  The Posting FastTab on the Work Center Card has multiple cost related fields.If the Direct Unit Cost is 100, the Indirect Cost % is 15, and the Overhead Rate is 20, what is the value in the Unit Cost field?

  A. 100
  B. 115
  C. 120
  D. 135
  D. 135

• Question 34:

  You are a technical support specialist for Microsoft Dynamics NAV 2009.One of your clients contacts you for assistance. Your client began processing a production order which was subsequently cancelled; the components were removed from inventory. Your client does not know how to record the adjustment to put the components back into inventory. What recommendation do you make to your client to correct inventory?

  A. Post a BOM journal; for the finished good enter a line with the item number and a negative quantity.
  B. Post a Consumption Journal; for the components enter a line with the production order, the item number, and a negative quantity.
  C. Execute the Reverse Consumption batch job from the production order.
  D. Post an Item Journal; for each component enter a line with a type of positive adjustment, the item number, and a positive quantity.
  B. Post a Consumption Journal; for the components enter a line with the production order, the item number, and a negative quantity.

• Question 35:

  You are a technical support specialist working with Microsoft Dynamics NAV 2009.You receive a call from a client requesting assistance with production BOMs. Your client has created a new version of a production BOM; however, when they create a production order, the original BOM is used. In response to your questions, your client indicates that the Active Version field on the original production BOM is blank. What setup do you ask your client to verify to determine why the Active Version field is blank? Choose the 2 that apply.

  A. On the production BOM version, verify the Starting Date field is populated with a date prior to the work date.
  B. On the production BOM version, verify the Status is Certified.
  C. On the production BOM version, verify the Active Version field is selected.
  D. In Manufacturing Setup, verify the Use Production BOM Version check box is selected.
  A. On the production BOM version, verify the Starting Date field is populated with a date prior to the work date.
  B. On the production BOM version, verify the Status is Certified.

• Question 36:

  A planner is running a regenerative plan for MPS only. What type of demand will influence the output?

  A. Sales orders, forecast entries, and blanket orders
  B. Customer orders and components needed
  C. Sales orders only
  D. Forecast, sales orders, and components needed
  A. Sales orders, forecast entries, and blanket orders

• Question 37:

  What two methods are used to change the status of production orders? Choose the 2 that apply.

  A. For an individual production order, select the status in the Status field of the production order.
  B. For an individual production order, use the Change Status batch job from the production order.
  C. For multiple production orders, use the Change Production Order Status batch job.
  D. For multiple production orders, use the Change Status batch job from the Planning Worksheet.
  B. For an individual production order, use the Change Status batch job from the production order.
  C. For multiple production orders, use the Change Production Order Status batch job.

• Question 38:

  When the Finished check box is selected on a line in the Output Journal, what functions are performed upon posting? Choose the 2 that apply.

  A. Any expected quantities to consume are posted.
  B. The production order status is changed to Finished.
  C. The routing line status is changed to Finished.
  D. The operation is removed from the Allocated Quantity field in the Work Center Load or Machine Center Load.
  C. The routing line status is changed to Finished.
  D. The operation is removed from the Allocated Quantity field in the Work Center Load or Machine Center Load.

• Question 39:

  You are a consultant implementing Microsoft Dynamics NAV 2009.You are assisting your client in setting up a Work Center. On the Scheduling FastTab your client has selected minutes in the Unit of Measure Code field.Your client tells you that for the Assembly Department, there are five employees working an eight hour shift. Your client also tells you that time study results indicate that the employees work on average 6.4 hours of the eight hour shift.What entries do you advise your client to make in the Capacity and Efficiency fields on the Scheduling FastTab?

  A. Capacity = 60, Efficiency = 80
  B. Capacity = 5, Efficiency = 80
  C. Capacity = 5, Efficiency = 100
  D. Capacity = 500, Efficiency = 80
  B. Capacity = 5, Efficiency = 80

• Question 40:

  What activities might be performed using Finished Production Orders? Choose the 3 that apply.

  A. Standard, expected, and actual costs of a production order may be reviewed using the Production Order Statistics window.
  B. Production order ledger entries may be reviewed for information regarding quantity, work centers, and machine centers.
  C. Additional activity may be posted to a finished production order after changing the status to Allow Posting.
  D. In a make-to-order environment, a finished production order may be selected as a template for creating new production orders using the Copy Prod. Order Document function.
  A. Standard, expected, and actual costs of a production order may be reviewed using the Production Order Statistics window.
  B. Production order ledger entries may be reviewed for information regarding quantity, work centers, and machine centers.
  D. In a make-to-order environment, a finished production order may be selected as a template for creating new production orders using the Copy Prod. Order Document function.