Microsoft MB-335 Online Practice Questions and Exam Preparation

Microsoft MB-335 Online Questions & Answers

• Question 111:

  HOTSPOT

  You are a manufacturing consultant helping a client test out different bill of material (BOM) and route consumption options when starting production orders. Material and labor consumption are to be completed before Report as finish.

  You are running a production order with BOM lines that have a Flushing principle set to Start. The Automatic Route Consumption Runtime has been set to Yes.

  You have set up the default Start user options for all production orders as shown in the exhibit below.

  

  

  

• Question 112:

  DRAG DROP

  You are the product design manager for a computer manufacturer.

  Your new laptop model is configurable.

  There are restrictions on which hardware components can be selected depending on the model. You create configuration groups for hardware and software.

  You need to create a new laptop item number and configurations.

  In which order should you perform the actions? To answer, move all actions from the list of actions to the answer area and arrange them in the correct order.

  Select and Place:

  

  

  ---

  
  

• Question 113:

  Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.

  After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.

  A client subcontracts production work to a vendor for production operations.

  You need to model subcontracting of route operations in production orders.

  Solution: Ensure that the material routing process is independent of the services procurement process.

  Does the solution meet the goal?

  A. Yes
  B. No
  B. No

  ---

  Explanation

  There are two methods for modeling subcontracting work for production operations. These methods differ in the way that the subcontracting process can be modeled, the way that semi-finished products are represented in the process, and the way that cost control is managed.

  * Subcontracting of route operations in production orders or batch orders.

  The service product must be a stocked product, and it must be part of the BOM. This method supports first in, first out (FIFO) or standard cost. Semi-finished products are represented by the service product in the process. Cost control allocates the costs that are associated with subcontracted work to the material costs.

  * Subcontracting of production flow activities in a lean production flow.

  The service is a non-stocked service product, and it isn't part of the BOM. This method uses purchase agreements as service agreements.

  This method uses backflush costing.

  This method allows for aggregated and asynchronous procurement. (Material flow is independent of the procurement process.)

  Cost control allocates subcontracted work in its own cost breakdown block.

  https://docs.microsoft.com/en-us/dynamics365/supply-chain/production-control/manage-subcontract-work-production

• Question 114:

  You need to create the constraint for the ML seat selection.

  Which expression constraint should you use?

  A. Implies[Trim==Legend,Seat==ML]
  B. Seat!=ML
  C. [Trim==Legend|Seat==ML]
  D. Implies[Seat==ML,Trim==Legend]
  D. Implies[Seat==ML,Trim==Legend]

  ---

  Explanation

  https://docs.microsoft.com/en-us/dynamics365/supply-chain/pim/expression-constraints-tableconstraints-product-configuration-models

• Question 115:

  HOTSPOT

  A company implements Dynamics 365 Supply Chain Management.

  You run a master plan each week.

  You need to resolve the issue in the scenario.

  What should you do? To answer, select the appropriate option in the answer area.

  NOTE: Each correct selection is worth one point.

  

  

  ---

  
  

• Question 116:

  You need to resolve the ModelA charging issue.

  Which two configurations should you set on the work order finite capacity?

  NOTE: Each correct selection is worth one point.

  A. Ignore scheduled execution
  B. Asset
  C. Tool
  D. Worker
  E. Ignore schedule
  A. Ignore scheduled execution
  E. Ignore schedule

  ---

  
  

• Question 117:

  DRAG DROP

  A company uses Process manufacturing and needs to review formulas to understand how different ingredient types affect the batch balancing process.

  Which ingredient types should you use? To answer, drag the appropriate ingredient types to the correct scenarios. Each ingredient type may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.

  NOTE: Each correct selection is worth one point.

  Select and Place:

  

  

• Question 118:

  Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.

  After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.

  A manufacturing plant uses Lean process. You plan to outsource a painting operation to a subcontracting vendor. You create a service item named SP-01 to represent the painting service.

  You need to create a subcontracting activity for the painting service.

  Solution:

  1. Create a vendor warehouse for the subcontracting vendor

  2. Create a vendor resource and add it to a new work cell for outsource painting

  3. Create a production flow transfer activity and specify the vendor warehouse as the target warehouse

  Does this solution meet the goal?

  A. Yes
  B. No
  B. No

  ---

  
  

• Question 119:

  HOTSPOT

  A company uses Dynamics 365 Supply Chain Management and plans to implement the Asset management module to maintain its collection of milling machine fixtures.

  The module must be set up to meet the following requirements:

  1. Conduct regular oil sampling for each machine.

  2. Manage all calibration types-including tooling, instrumentation, and tolerances-that require the same performance skillset as a group.

  3. Outsource preventive maintenance for pneumatic tapping machines due to a lack of in-house skills.

  4. Schedule all maintenance activities simultaneously to maximize efficiency and minimize costs.

  You need to configure the system to fulfill these requirements.

  Which option should you configure to achieve this? To answer, select the appropriate options in the answer area.

  NOTE: Each correct selection is worth one point.

  

  

• Question 120:

  You are the lead product design engineer at a plastics manufacturing company.

  You implement a new process that uses a single to produce three finished at the same time.

  You need to set up the planning items number and formula to correctly to manufacturing the tree items.

  Which three actions should you perform? Each correct answer presents part of the solution.

  A. Create item number for planning item and the associated formula.
  B. Specify each of the nished good items as co-products.
  C. Add minimum and maximum quantities on formula.
  D. Assign co-products to the formula.
  E. Add a coverage group to the formula.
  A. Create item number for planning item and the associated formula.
  B. Specify each of the nished good items as co-products.
  D. Assign co-products to the formula.

  ---