Juniper JN0-360 Online Practice Questions and Exam Preparation

Juniper JN0-360 Online Questions & Answers

• Question 31:

  A route to the same destination is received from two different BGP sources. Which criterion is considered first to determine the active BGP route?

  A. cluster length
  B. AS-path length
  C. lowest RID
  D. local preference
  D. local preference

• Question 32:

  What are two valid next-hop types that would be configured for a static route? (Choose two.)

  A. An egress interface name
  B. An IP address
  C. An igress interface name
  D. A MAC address
  A. An egress interface name
  B. An IP address

• Question 33:

  What is the OSPFv3 router ID?

  A. 0.0.0.0
  B. 192.168.1.1
  C. 2001::1:2
  D. 2001::192.168.1.1
  B. 192.168.1.1

• Question 34:

  You are asked to deploy a large-scale IS-IS network with multiple areas. Which two statements are true? (Choose two.)

  A. A collection of Level 1 routers in different areas constitute the backbone in the network.
  B. Level 2 routers can route between areas.
  C. Level 1 routers can route between areas.
  D. A collection of Level 2 routers in different areas constitute the back bone in the network.
  B. Level 2 routers can route between areas.
  D. A collection of Level 2 routers in different areas constitute the back bone in the network.

• Question 35:

  You have been asked to identify the contributing prefixes for aggregate route 181.77.5/24. Which command will display this information?

  A. show route 181.77.5/24 detail
  B. show route 181.77.5/24
  C. show route 181.77.5/24 exact summary
  D. show route 181.77.5/24 extended
  A. show route 181.77.5/24 detail

• Question 36:

  R1 is an OSPF router with a priority of 100 and has been elected as the designated router (DR). R2 is the backup designated router (BDR) with a priority of 50. A third router, R3, comes online with a priority of 200.

  Which routers will be the DR and BDR after R3 comes online?

  A. R1 will be the DR and R2 will be the BDR.
  B. R3 will be the DR and R1 will be the BDR.
  C. R2 will be the DR and R1 will be the BDR.
  D. R3 will be the DR and R2 will be the BDR.
  A. R1 will be the DR and R2 will be the BDR.

• Question 37:

  Which standards-based election protocol facilitates redundancy in a LAN environment by eliminating a single point of failure through the use of master and backup routers.

  A. VRRP
  B. BFD
  C. graceful restart
  D. ISSU
  A. VRRP

• Question 38:

  Click the Exhibit button.

  

  In the exhibit, R1, R2, and R3 are all IBGP peers within AS 65505. R1 receives a BGP advertisement from an external BGP peer in AS 65555, and a BGP advertisement from R3. The default BGP advertisement behavior is in effect in this environment.

  In this scenario, which two statements are true? (Choose two.)

  A. R1 will advertise the route received from R3 to R2 and its external BGP peer.
  B. R1 will advertise the route received from R3 only to its external BGP peer.
  C. R1 will advertise the route received from its external peer to R2 and R3.
  D. R1 will not advertise the route received from its external peer to R2 or R3.
  B. R1 will advertise the route received from R3 only to its external BGP peer.
  C. R1 will advertise the route received from its external peer to R2 and R3.

• Question 39:

  Click the Exhibit.

  

  Exhibit

  

  Referring to the exhibit, which route(s) will be exported to neighbor 192.168.1.2?

  A. 100.0.1/32 and 100.0.20.1/32
  B. 10.0.0.0/24, 11.0.0.0/24,100.0.0.1/32, 100.0.20.1/32, and 192.168.1.1/32
  C. 100.0.20.1/32, 192.168.1.1/32, and 100.0.0.1/32
  D. 100.0.20.1/32
  B. 10.0.0.0/24, 11.0.0.0/24,100.0.0.1/32, 100.0.20.1/32, and 192.168.1.1/32

• Question 40:

  Which three statements area true regarding BGP local preference? (Choose three.)

  A. A higher value is preferred over a lower value
  B. A lower value is preferred over a higher value
  C. Local preference is not shared between autonomous systems
  D. Local preference can be altered by policy or configuration
  E. Local preference has a default value of 128
  A. A higher value is preferred over a lower value
  C. Local preference is not shared between autonomous systems
  D. Local preference can be altered by policy or configuration