Juniper JN0-360 Online Practice Questions and Exam Preparation

Juniper JN0-360 Online Questions & Answers

• Question 341:

  What is a reason for an OSPF router to display a designated router ID of 0.0.0.0?

  A. The MTU is mismatched.
  B. The subnet mask is mismatched.
  C. The interface type is point-to-point.
  D. The interface type is broadcast.
  C. The interface type is point-to-point.

• Question 342:

  Which two statements are correct about neighbor discovery in IPv6? (Choose two.)

  A. Neighbor discovery relies on ARP to find neighbors on a local link.
  B. A neighbor is considered reachable when the neighboring device responds to a neighbor solicitation message.
  C. A neighbor is considered reachable when the neighboring device responds to a router solicitation message.
  D. Neighbor discovery does not use ARP to find neighbors on a local link.
  B. A neighbor is considered reachable when the neighboring device responds to a neighbor solicitation message.
  D. Neighbor discovery does not use ARP to find neighbors on a local link.

• Question 343:

  You are logged into a router and have navigated to the [edit routing-options] level of the hierarchy. You have been asked to create a static route that will use 43.18.7.1 as its primary next-hop and 76.13.10.2 as its secondary next-hop. Which command correctly configures this setup?

  A. set static route 0/0 76.13.10.2 qualified-next-hop 43.18.7.1 pref 10
  B. set static route 0/0 next-hop 43.18.7.1 secondary-next-hop 76.13.10.2 preference 10
  C. set static route 0/0 next-hop [76.13.10.2 10.10.10.5] pref 10
  D. set static route 0/0 next-hop 43.18.7.1 qualified-next-hop 76.13.10.2 preference 10
  D. set static route 0/0 next-hop 43.18.7.1 qualified-next-hop 76.13.10.2 preference 10

• Question 344:

  Which two statements are true about NSR? (Choose two.)

  A. NSR requires graceful restart to function properly
  B. NSR requires redundant REs.
  C. NSR requires only one RE.
  D. NSR requires GRES to function properly.
  B. NSR requires redundant REs.
  D. NSR requires GRES to function properly.

• Question 345:

  What must be configured for all IBGP speakers in an AS to have consistent routing information?

  A. Partial mesh of EBGP sessions between EBGP speakers
  B. Default routes to the IBGP gateways
  C. Static routes to the EBGP gateways
  D. Full mesh of IBGP sessions between IBGP speakers
  D. Full mesh of IBGP sessions between IBGP speakers

• Question 346:

  Click the Exhibit button.

  

  Referring to the exhibit, which two statements are correct? (Choose two.)

  A. Type 2 LSAs are not created for this link.
  B. Type 2 LSAs are created for this link.
  C. Designated router election does not occur on this link.
  D. Designated router election occurs on this link.
  A. Type 2 LSAs are not created for this link.
  C. Designated router election does not occur on this link.

• Question 347:

  What are two ways to prevent Layer 2 loops in a network? (Choose two)

  A. BPDU protection
  B. LDP protection
  C. loop protection
  D. Layer 2 protection
  A. BPDU protection
  C. loop protection

• Question 348:

  -- Exhibit -

  

  -- Exhibit -

  Click the Exhibit button.

  In the exhibit, A1 sends a broadcast frame with destination MAC address FFFF.FFFF.FFFF, and all other stations have sent a response .

  What would be the correct MAC address table on the MX240? ge-0/0/0 0140.5501.1111

  A. ge-0/0/0 FFFF.FFFF.FFFF
  B. ge-0/0/0 FFFF.FFFF.FFFF
  C. ge-0/0/0 0140.5501.2222 ge-0/0/1 0140.5501.3333 ge-0/0/1 0140.5501.4444 ge-0/0/0 0140.5501.1111
  D. ge-0/0/0 0140.5501.2222 ge-0/0/1 0140.5501.3333 ge-0/0/1 0140.5501.4444
  D. ge-0/0/0 0140.5501.2222 ge-0/0/1 0140.5501.3333 ge-0/0/1 0140.5501.4444

• Question 349:

  You have multiple Layer 3 VPNs supporting your various customers. Some of the customers use overlapping IP address space. What is used to ensure each customer's prefixes are unique?

  A. route target
  B. MP-BGP
  C. BGP communities
  D. route distinguisher
  D. route distinguisher

• Question 350:

  In an RSVP-based MPLS network, which ERO type specifies the exact order of routers through which an LSP must travel, without consulting the IGP?

  A. loose hop
  B. static hop
  C. next hop
  D. strict hop
  D. strict hop