Juniper JN0-360 Online Practice Questions and Exam Preparation

Juniper JN0-360 Online Questions & Answers

• Question 91:

  Click the Exhibit button.

  

  In the exhibit, all routers are sending routes to Router B. Which routes will be advertised from Router B to Router E?

  A. BGP routes learned from Router A only
  B. BGP routes learned from Router D only
  C. BGP routes learned from Routers A and C only
  D. BGP routes learned from Routers A, C, and D only
  D. BGP routes learned from Routers A, C, and D only

• Question 92:

  Which two statements are true about unified in-service software upgrade (ISSU)? (Choose two.)

  A. Unified ISSU is supported only on dual Routing Engine (RE) platforms
  B. To perform a unified ISSU, it is not necessary for the master RE and backup RE to be running the same version of the Junos OS
  C. Unified ISSUE causes minimal disruption on both the control and forwarding planes
  D. Graceful Routing Engine Switchover (GRES) and nonstop active routing (NSR) must be enabled to perform a unified ISSU
  A. Unified ISSU is supported only on dual Routing Engine (RE) platforms
  D. Graceful Routing Engine Switchover (GRES) and nonstop active routing (NSR) must be enabled to perform a unified ISSU

• Question 93:

  Which two RSVP messages are used to establish a new LSP? (Choose two.)

  A. path
  B. pathconfirm
  C. Resv
  D. ResvConfirm
  A. path
  C. Resv

• Question 94:

  -- Exhibit -interfaces {

  ge-1/0/3 {

  unit 0 {

  family inet {

  address 192.168.1.1/30;

  }

  }

  }

  ge-1/1/0 {

  unit 0 {

  family inet {

  address 10.100.10.1/30;

  }

  }

  }

  fxp0 {

  unit 0 {

  family inet {

  address 10.2.1.13/28;

  }

  }

  }

  lo0 {

  unit 0 {

  family inet {

  address 10.100.1.1/32;

  address 127.0.0.1/32;

  }

  }

  }

  }

  protocols {

  ospf {

  area 0.0.0.0 {

  interface ge-1/0/3.0;

  interface ge-1/1/0.0;

  }

  }

  }

  -- Exhibit -

  Click the Exhibit button.

  The router was just powered on.

  Referring to the exhibit, what is the OSPF RID?

  A. 192.168.1.1
  B. 10.100.1.1
  C. 127.0.0.1
  D. 10.2.1.13
  B. 10.100.1.1

• Question 95:

  -- Exhibit -[edit] user@router# run show isis interface IS-IS interface database: Interface L CirID Level 1 DR Level 2 DR L1/L2 Metric ge-1/0/2.0 3 0x1 router.00 router.00 10/10 lo0.0 0 0x1 Passive Passive 0/0 -- Exhibit -Click the Exhibit button.

  Referring to the exhibit, which two statements are true regarding the GE interface? (Choose two.)

  A. It operates at both Level 1 and Level 2.
  B. It operates at Level 3, which supports hierarchical backbone areas.
  C. The local router is the IS-IS designated intermediate system at all levels.
  D. The local router is the IS-IS designated router at all levels.
  A. It operates at both Level 1 and Level 2.
  C. The local router is the IS-IS designated intermediate system at all levels.

• Question 96:

  Which two statements are correct regarding VPLS mesh groups? (Choose two.)

  A. Unicast packets destined to another PE router within the same mesh group are dropped by the local PE router.
  B. Unicast packets destined to another PE router in a different mesh group are dropped by the local PE router.
  C. Broadcast, multicast, and unicast packets of unknown origin received from a PE router are flooded to all local CE routers.
  D. Broadcast, multicast, and unicast packets of unknown origin received from a PE router are flooded to all remote PE routers.
  A. Unicast packets destined to another PE router within the same mesh group are dropped by the local PE router.
  C. Broadcast, multicast, and unicast packets of unknown origin received from a PE router are flooded to all local CE routers.

• Question 97:

  What are three label operations that an MPLS-enabled router performs? (Choose three.)

  A. swap
  B. push
  C. pop
  D. insert
  E. rewrite
  A. swap
  B. push
  C. pop

• Question 98:

  You are logged into a PE router participating in a Layer 3 VPN as defined in RFC 4364. You would like to ping the locally connected CE router's interface. The address of the interface is 192.168.1.1; the VPN routing-instance is named VPN

  A. Which command will accomplish this task?
  B. ping routing-instance VPN-A 192.168.1.1
  C. ping instance VPN-A 192.168.1.1
  D. ping vpn-instance VPN-A 192.168.1.1
  E. ping VPN-A 192.168.1.1
  F. ping mpls l3vpn VPN-A 192.168.1.1
  E. ping VPN-A 192.168.1.1

• Question 99:

  Your area border router (ABR) receives type 1.2 and 5 link-state advertisements (LSAs) from a non-backbone area. What would the ABR do with the information learned from the non-backbone area?

  A. The ABR will generate type 2 and 3 LSAs and flood type 5 LSAs to the backbone area
  B. The ABR will generate only type 3 LSAs and flood only type 5 LSAs to the backbone area
  C. The ABR will generate type 3 and 4 LSAs. And flood type 5 LSAs to the backbone area
  D. The ABR will generate only type 4 LSAs and flood only type 5 LSAs to the backbone area
  C. The ABR will generate type 3 and 4 LSAs. And flood type 5 LSAs to the backbone area

• Question 100:

  Click the Exhibit button.

  

  In the exhibit, which configuration is required to establish a single adjacency between the two IS- IS routers?

  A. set protocols isis interface xe-0/0/0.0 point to point
  B. set protocols isis level 2 wide-metrics-only
  C. set protocols isis interface xe-0/0/0.0 level 1 disable
  D. set protocols isis interface xe-0/0/0.0 level 1 priority 0
  A. set protocols isis interface xe-0/0/0.0 point to point