HP HP2-T26 Online Practice Questions and Exam Preparation

HP HP2-T26 Online Questions & Answers

• Question 161:

  In RBSU, which profile setting takes precedence over the NIC Personality option in a G7 server?

  A. ICSI
  B. network server mode
  C. virtual connect
  D. embedded NIC
  E. FCoE
  D. embedded NIC

• Question 162:

  When using the Configure or Repair Agent capability of HP SIM 7.0, which software component is unsupported for G7 servers and earlier?

  A. WBEMMMI Provider
  B. Agent Management Service
  C. OpenSSH for Windows
  D. SNMP Agent
  B. Agent Management Service

• Question 163:

  Click the area of the graphic where you view diagnostic test error information.

  Hot Area:

  

  

• Question 164:

  How does humidity affect a data center? (Select two.)

  A. The potential for condensation increases when humidity increases.
  B. When humidity decreases within the data center, flexible joints become fragile.
  C. When humidity increases, the potential for ESD increases.
  D. The potential for condensation decreases when humidity decreases.
  E. When humidity increases within the data center, flexible joints become fragile.
  F. When humidity decreases, the potential for ESD increases.
  A. The potential for condensation increases when humidity increases.
  C. When humidity increases, the potential for ESD increases.

• Question 165:

  The customer replaced a server blade that had been backed up to an Ultrium 448 Tape Drive. How should you restore the server blade and have it fully functional?

  A. During POST, you select F9 to restore from tape.
  B. You power up the server blade and hold down the One-Button Disaster Recovery (OBDR) button.
  C. You insert the tape that has the backup of the server, then power up the blade.
  D. You power up the blade and select F9 during POST to enter into the RBSU. In the RBSU, you select Restore from tape
  B. You power up the server blade and hold down the One-Button Disaster Recovery (OBDR) button.

• Question 166:

  Where does Active Health collect the data from?

  A. Event Log
  B. SMH
  C. IML
  D. iLO
  D. iLO

• Question 167:

  How should you save a Virtual Connect configuration?

  A. from CLI: show all > cfg.txt
  B. enclosure setting, configuration scripts, inventory
  C. enclosure setting, configuration scripts, show config, save
  D. domain setting, backup/restore
  D. domain setting, backup/restore

• Question 168:

  Which HP c-Class server blades take up two c3000 enclosure server bays? (Select two.)

  A. BL860c
  B. BL870c
  C. BL685 G7
  D. BL490 G6
  E. BL2x220c G6
  A. BL860c
  C. BL685 G7

• Question 169:

  What must be verified when replacing the Virtual Connect FlexFabric modules in a c7000 enclosure?

  A. Baseboard Management Controller firmware on all server blades
  B. Virtual Connect Manager SSO authentication with Onboard Administrator of the enclosure
  C. Onboard Administrator firmware and LOM firmware on server blades
  D. ILO firmware of the blade server located in bay 1 only
  C. Onboard Administrator firmware and LOM firmware on server blades

• Question 170:

  Which HP BladeSystem component is used for power allocation and control for all blades and interconnects?

  A. Rack and Power Manager
  B. Power Manager
  C. Onboard Administrator
  D. Insight Display
  C. Onboard Administrator