HP HP2-T26 Online Practice Questions and Exam Preparation

HP HP2-T26 Online Questions & Answers

• Question 181:

  Which address should you enter into your browser to remotely access an HP SIM interface?

  A. https://:50000/
  B. https://:2381/
  C. https://:8080/
  D. https://:2301/
  A. https://:50000/

• Question 182:

  What is the advantage of Solid State Drive over I/O Accelerator?

  A. It offers higher reliability.
  B. It is bootable.
  C. It has a longer life span.
  D. It has higher throughput.
  B. It is bootable.

• Question 183:

  You want to add memory to an existing BL890c i2 server. The new DIMMs have a different size than the installed ones. Which memory upgrade guideline is correct?

  A. Distribute old and new memory evenly on all blade modules, installing the larger ones first.
  B. Blade modules 1 and 2 must have one DIMM size, and blade modules 3 and 4 must have the other DIMM size.
  C. Blade modules 1 and 3 must have one DIMM size, and blade modules 2 and 4 must have the other DIMM size.
  D. Distribute old and new memory evenly on all blademodules, installing the smallerones first.
  A. Distribute old and new memory evenly on all blade modules, installing the larger ones first.

• Question 184:

  Which statement describes the features of Service Pack for ProLiants (SPP)?

  A. SPP is a combination of the PSPs and the HP SmartUpdate Firmware DVD.
  B. SPP is supported only on Windows Servers.
  C. SPP requires configuration through RBSU.
  D. SPP is the replacement for the Service and Diagnostics tools.
  A. SPP is a combination of the PSPs and the HP SmartUpdate Firmware DVD.

• Question 185:

  A BL490c G6 with a quad-port NIC is installed in mezzanine slot 1 of a c3000 enclosure. How many ports on the quad-port NIC are available for connectivity?

  B. 2
  C. 4
  D. 6
  C. 4

• Question 186:

  Which benefit is provided by having identical Interconnect modules in adjacent bays of the c7000 enclosure?

  A. reduced power requirements
  B. dynamic IO bandwidth
  C. improved uplink failure detection
  D. redundant IO capabilities
  D. redundant IO capabilities

• Question 187:

  Given the c7000 power supply configuration shown, which power supply modules should be connected to power circuit A to achieve N+N power redundancy?

  

  A. 4, 5, 6
  B. 2, 4, 6
  C. 1, 2, 3
  D. 1, 3, 5
  C. 1, 2, 3

• Question 188:

  Place the background color of Insight Display next to its description. Note: Not all colors are used.

  Select and Place:

  

  

• Question 189:

  A customer has a critical blade server, and you discover that the system ROM is causing memory errors. After you update this blade, how can you confirm that the other blades have the correct system ROM?

  A. Tell the customer to shut down now so you can see the POST message.
  B. Browse to the OA, then hover over the ILO, and check the version.
  C. Connect to the OA using putty and type show all.
  D. Connect to the OA using telnet and type show server version all.
  C. Connect to the OA using putty and type show all.

• Question 190:

  What should be done after a repair has been validated?

  A. The IML log entry should be marked as repaired.
  B. The failed entry should be cleared from the IML.
  C. All IML entries should be cleared to make room for future entries.
  D. All outstanding IML entries should be marked repaired.
  B. The failed entry should be cleared from the IML.