HP HP0-S35 Online Practice Questions and Exam Preparation

HP HP0-S35 Online Questions & Answers

• Question 41:

  While analyzing a customer's business requirements, you learn that they would like to consolidate their interconnect equipment and allocate network bandwidth based on application requirements. Which interconnect technology should you recommend?

  A. HP GBE2c Layer 2/3 Ethernet Blade Switch
  B. HP InfiniBand interconnect
  C. HP Virtual Connect Flex-10
  D. HP Virtual Connect 6120 Blade
  E. HP 6120XG Blade Switch
  C. HP Virtual Connect Flex-10

• Question 42:

  In a P4000 system, which Network RAID level is required to power off the drive in the Central Management Console before removing it?

  A. RAID 0
  B. RAID 1
  C. RAID 5 D. RAID 50
  A. RAID 0

• Question 43:

  A customer is interested in an HP Installation and Startup Service for a new HP BladeSystem c- Class environment. Which HP resource can you use to identify included services?

  A. Installation and Startup Services Data Sheet
  B. CarePack Lookup Tool
  C. Business Service and Support Center
  D. Active Answers
  A. Installation and Startup Services Data Sheet

  ---

  The CLT provides information on which CarePack services are available for a given hardware part number... When you select a service level in the CLT it then references the relevant Installation and Startup Services Data Sheet and it's the data sheets that identify what services are included... http://h20345.www2.hp.com/NR/rdonlyres/F18D34DA-6836-47B7-BB5E- 313E8CD39A08/0/SvcDesc_INHW_INBC.pdf

  http://h20195.www2.hp.com/V2/GetPDF.aspx/4AA0-5964ENW.pdf

• Question 44:

  A customer has a c7000 blade enclosure with several HP ProLiant blade Gen8 server installed in an HP10636 G2. The customer ordered an HP UPS R8000\3 for this blade configuration and it needs to be installed in this rack?

  A. Install the UPS R8000\3 in a separate HP 10636 G2 rack
  B. Move the c7000 up in the rack and install the UPS R8000/3 at the bottom of the rack just below the c7000
  C. Install the UPS R9000/3 at the top of the rack to provide weight balance
  D. Move the c7000 to the top of the rack and install the UPS R8000/3 at the bottom of the rack for poper weight balance
  B. Move the c7000 up in the rack and install the UPS R8000/3 at the bottom of the rack just below the c7000

• Question 45:

  What is the minimum care pack level to sell if a customer wants the cheapest out-of-business hours support?

  A. Basic
  B. Advanced
  C. Proactive
  D. Standard
  B. Advanced

• Question 46:

  You are about to upgrade drivers in a SAN environment that has several large HP tape libraries. Where should you check to confirm that the new HBA driver has been tested?

  A. Library and Tape Tools Update Check
  B. EBS Sample Configuration
  C. EBS compatibility Matrix
  D. EBS Design Guide
  C. EBS compatibility Matrix

  ---

  Reference: http://h20000.www2.hp.com/bc/docs/support/SupportManual/c03357510/c03357510.pdf

• Question 47:

  A customer wants to add a second dual port Fiber Channel adapter to a BL460c Gen8 Server in an HP BladeSystem?

  A. FC HBA in Mezzanine two with FC interconnects in slots seven and eight
  B. FC HBA in Mezzanine two with FC interconnects in slots three and four
  C. FC HBA in Mezzanine two with FC interconnects in slots five and seven
  D. FC HBA in Mezzanine two with FC interconnects in slots five and six
  D. FC HBA in Mezzanine two with FC interconnects in slots five and six

  ---

  In typical HP lazy question style this answer is open to debate, as we do not know if they are using a c7000 or c3000 chassis... In cases like this plum for whatever makes HP more money..! So c7000 in this case...

  http://h20000.www2.hp.com/bc/docs/support/SupportManual/c00810839/c00810839.pdf All of HP c-Class FC HBA's are Dual Ported and their signals can only route out of ports #1 and #2 even when they are installed in a Mezz slot with 4

  signal paths... There is NO WAY to alter this...

  So, if we assume the question is aimed at a c7000 enclosure then:

  A FC HBA installed in Mezzanine #2 would route signals to Interconnect Bays 5 and 6 on a c7000 enclosure.

  

  However, if we assume the question is aimed at a c3000 enclosure then:

  A FC HBA installed in Mezzanine #2 would route signals to Interconnect Bays 3 and 4 on a c3000 enclosure.

  

• Question 48:

  Which HP PDU provides remote monitoring and has the ability to switch power on selected outlets?

  A. Modular PDU
  B. Modular PDU with optional SNMP module
  C. iPDU with the Intelligent Extension Bars
  D. Monitored PDU
  C. iPDU with the Intelligent Extension Bars

  ---

  http://h18004.www1.hp.com/products/servers/rackandpower/powersupplies/ipdu/index.html Using the core and stick architecture of HP Modular PDU line, the HP Intelligent PDU provides monitoring of power consumption at the core, load segment, stick, and outlet level with unmatched precision and accuracy.

  Remote management is built in and even provides power cycle ability of individual outlets on the Intelligent Extension Bars.

• Question 49:

  Which HP resource provides information on energy and cooling based on utilization scenarios for an HP BladeSystem c-Class system?

  A. Power Advisor
  B. Virtual Connect Enterprise Manager
  C. Utility Ready Blade Reporter
  D. Onboard Administrator
  A. Power Advisor

• Question 50:

  A customer wants to log into the onboard administrator (OA) on a c7000 but has forgotten the password. The administrator password is also missing and must be recovered. Place the steps to do these tasks in the correct sequence.

  Select and Place: