HP HP0-S35 Online Practice Questions and Exam Preparation

HP HP0-S35 Online Questions & Answers

• Question 21:

  What is a possible reason for the Unknown port status in Fabric-A in the screenshot shown?

  

  A. More than 16 Virtual Connect profiles use this port
  B. The Fibre Channel switch port is not run in NPIV mode
  C. More than 8 WWNs are assigned to this port
  D. The external disk array does not present any LUN to this port
  B. The Fibre Channel switch port is not run in NPIV mode

• Question 22:

  What is the maximum number of BL680c G7 servers you can instaqll in a c7000 rack enclosure?

  B. 8
  C. 12
  D. 16
  A

  ---

  http://h18004.www1.hp.com/products/quickspecs/13742_div/13742_div.PDF

  

• Question 23:

  What can you sue to transfer information over a power distribution infrastructure consisting of an iPDU and extension bars?

  A. dedicated null modem serial cable
  B. Power over Ethernet connection (PoE)
  C. mini USB power connection
  D. power line communications (PLC)
  D. power line communications (PLC)

• Question 24:

  As an administrator, you are required to monitor maximum CPU time on system processes on all nodes within your environment. What can happen when a threshold is crossed more than three consecutive times?

  A. A command runs
  B. A bottleneck is detected by displaying a Threshold Notification dialogue box.
  C. The server shuts down
  D. An error is logged
  B. A bottleneck is detected by displaying a Threshold Notification dialogue box.

• Question 25:

  You configured HP SIM to send email alerts if a system crashes in a LAN/WAN environment. You occasionally receive email alerts with false notification of an unreachable system, even if the system has been up and running without any

  crash or hang.

  What should you do first to correct the problem?

  A. Reboot the server and apply the latest Windows and HP patches
  B. Customize the Retries value from 1 to 5
  C. Customize the Timeout and Retries values for that specific
  D. Customize the Timeout and Retries values on the Discovery page
  B. Customize the Retries value from 1 to 5

• Question 26:

  What is the fastest way to verify SAS drive firmware before installing an operating system?

  A. HP Smart Update Manager (SUM)
  B. Integrated Light Out
  C. Firmware DVD
  D. BladeSystem Release Set
  B. Integrated Light Out

  ---

  True for iLO 3 and iLO 4...iLO3http://bizsupport2.austin.hp.com/bc/docs/support/SupportManual/c02774507/c02774507.pdf - Pages 90- 91

  

  iLO4 - http://h20628.www2.hp.com/km-ext/kmcsdirect/emr_na-c03334051-7.pdf - Page 121

• Question 27:

  What describes hot-aisle contaiment for rack placement in a data center?

  A. Two rows are positioned front to front
  B. Two rows are positioned front to back
  C. Two rows are positioned back to back
  D. Two rows are positioned back to front
  C. Two rows are positioned back to back

• Question 28:

  Which HP storage systems are built on the HP ProLiant server platform? (Select two)

  A. P2000 G3 Modular Smart Array System
  B. P4000 G2 Lefthand SAN solution
  C. P6000 Enterprise Virtual Array
  D. StoreOnce D2D 2504i Backup System
  E. P10000 3PAR Storage System
  B. P4000 G2 Lefthand SAN solution
  D. StoreOnce D2D 2504i Backup System

• Question 29:

  Which product should you use to turn the D2200sb into an iSCSI SAN for use by all servers in the enclosure and any server on the network?

  A. HP P2000sa G3
  B. HP P4000 Virtual SAN Appliance (VSA) software
  C. SB40C Storage
  D. HP X3800sb G2 Network Storage Gateway Blade
  B. HP P4000 Virtual SAN Appliance (VSA) software

• Question 30:

  What is used to increase the logical drive size in an HP Smart Array controller installed in an HP ProLiant server?

  A. DISKPART
  B. EXPAND
  C. ACU CLI
  D. ORCA
  C. ACU CLI

  ---

  http://www.tricksguide.com/how-to-expand-array-extend-logical-drive-raid-hp-acu.html