Huawei H19-424 Online Practice Questions and Exam Preparation

Huawei H19-424 Online Questions & Answers

• Question 81:

  iMaster NCE-Campus is deployed in a virtualized environment based on Taishan's physical server, and the corresponding virtualization software is:

  A. FusionCompute8.0
  B. FusionCompute6.5.1
  C. VNWare vSphere
  D. Fusionlnsight
  A. FusionCompute8.0

• Question 82:

  Which of the following parameters must be included when planning campus WAN egress design?

  A. Link bandwidth
  B. SLA requirements
  C. Application routing policies
  D. ISP diversity
  A. Link bandwidth
  B. SLA requirements
  C. Application routing policies
  D. ISP diversity

• Question 83:

  Which of the following descriptions is wrong about the MPLS tuning scheme ()

  A. It is recommended to deploy two-way tunnels to pass through the common road, which is convenient for maintenance and more reliable tunnel BFD detection
  B. When optimizing and calculating routes, priority is given to ensuring the creation of high- priority tunnels, and high-priority tunnels can preempt low-priority tunnel resources
  C. RSVP-TE, SR-TE, and LDP tunnels can be tuned
  D. When multiple load-balancing tunnels are deployed between two PE nodes, we recommend that you deploy a detached group.
  C. RSVP-TE, SR-TE, and LDP tunnels can be tuned

• Question 84:

  Which of the following WLAN design parameters must be evaluated for dense classroom scenarios?

  A. User concurrency
  B. Traffic model per student
  C. Spatial capacity
  D. Peak access rate per AP
  A. User concurrency
  B. Traffic model per student
  C. Spatial capacity
  D. Peak access rate per AP

• Question 85:

  The description of the channel configuration template for the configuration generation tool scenario is correct

  A. The channel template is available to all channel providers
  B. The channel template is available to all users
  C. The channel template is only available to the users of the channel, but cannot be modified
  D. The channel template is only available to the users of the channel and can be modified
  D. The channel template is only available to the users of the channel and can be modified

• Question 86:

  In the SDN-WAN solution, the principles that need to be followed in the design of ISIS Cost are incorrectly described ()

  A. The COST configuration of the MSTP link of the remote operator is larger, and it is recommended to configure 1000 to avoid traffic bypassing through the WAN link - the test is wrong
  B. The COST configuration of the link of WDM or bare fiber in the same city is the second smallest, and it is recommended to configure 200 to ensure that the route calculation is secondary to the same city link
  C. The COST value of the local link is the smallest, and it is recommended to configure 10 toensure that the route calculation gives priority to the local link test error
  D. The link cost between the RR and the PE is extra-large, and it is recommended to set 10,000 to ensure that the RR device is only responsible for control plane route reflection and does not forward traffic
  D. The link cost between the RR and the PE is extra-large, and it is recommended to set 10,000 to ensure that the RR device is only responsible for control plane route reflection and does not forward traffic

• Question 87:

  The following common obstacle signals have the least attenuation ()

  A. Metal (80mm)
  B. Brick wall (120mm)
  C. Bulletproof glass (120mm)
  D. Wooden door (40mm)
  D. Wooden door (40mm)

• Question 88:

  Regarding planning and design tools, the following statements are wrong

  A. The planning and design tool is used for after-sales planning and cannot be used before sales
  B. When the equipment model cannot be used, you can feedback it in the tool platform
  C. The tool can ensure the logical consistency and data consistency of the design
  D. In the case of large or frequent changes in the network, the old project can be retained and the new project can be designed
  A. The planning and design tool is used for after-sales planning and cannot be used before sales

• Question 89:

  Regarding the description of the design principles of Locator SID, it is incorrect ()

  A. For the Locator CIDR block planning of SRv6, the appropriate mask should be set according to the number of IPv6 SIDs that may be used by the device.
  B. loatos svV6_locator ipu6-prelix21.DB8ABCD: .b4 static 32, Locator is 2001.DB8.ABCD:, length 64 bits, static segment occupies 32 bits, dynamic segment occupies 32 bits args field occupies O bits. The starting value of the state segment is: 2001:DB8:ABCD:0000:0000:0000:C
  C. Locator SID supports static configuration or dynamic allocation, end-op and end-m must be statically configured, and static configuration is also recommended for end and end.x, which is convenient for network OandM. Other SIDs can be assigned dynamically.
  D. Devices at the same site belong to the same large network segment with the same prefix, and different devices are assigned to the small network segment with the same prefix in the large network segment.
  B. loatos svV6_locator ipu6-prelix21.DB8ABCD: .b4 static 32, Locator is 2001.DB8.ABCD:, length 64 bits, static segment occupies 32 bits, dynamic segment occupies 32 bits args field occupies O bits. The starting value of the state segment is: 2001:DB8:ABCD:0000:0000:0000:C

• Question 90:

  Which of the following statements is correct for the user requirements for configuring the translation tool ()

  A. If you already have a tool, you can fully trust the tool, and you don't need special skills
  B. I have a relatively high education, and I can solve problems by myself and can use them
  C. The tool is simple, and I have two years of work experience, so there is no problem with it
  D. Have systematic and professional knowledge of data communication network, and have more than two years of experience in data communication equipment development and maintenance
  D. Have systematic and professional knowledge of data communication network, and have more than two years of experience in data communication equipment development and maintenance