Huawei H19-424 Online Practice Questions and Exam Preparation

Huawei H19-424 Online Questions & Answers

• Question 1:

  Which of the following parameters can be automatically verified in the campus planning tool?

  A. Device board power
  B. Port-to-port connection rules
  C. Routing domain validity
  D. Cabinet space utilization
  A. Device board power
  B. Port-to-port connection rules
  D. Cabinet space utilization

• Question 2:

  Which routing protocols are recommended for multi-region campus networks requiring fast convergence?

  A. OSPF
  B. IS-IS
  C. eBGP
  D. RIP
  A. OSPF
  B. IS-IS

• Question 3:

  In campus fabric networking, which of the following are key considerations for planning the border node role?

  A. Number of external networks
  B. Position in the underlay topology
  C. Overlay service scale
  D. Support for VXLAN hardware forwarding
  A. Number of external networks
  B. Position in the underlay topology
  C. Overlay service scale
  D. Support for VXLAN hardware forwarding

• Question 4:

  Ethernet Segment Route(Type4)

  A. Multicast tunnel endpoint auto-discovery and multicast type auto-discovery
  B. Elastic search for ES members
  C. IPPrefix announcement
  D. MAC address learning Xi notice
  B. Elastic search for ES members

• Question 5:

  In the campus SDN solution, the statement about the distributed gateway solution is wrong ()

  A. Distributed gateway - VxLAN to access, independent AC scenario, for wireless traffic, local forwarding mode is not recommended.
  B. Distributed gateway - VxLAN to access, independent AC scenario, from the edge to the VN, on the edge to execute the service accompanying policy (the edge needs to subscribe to the IP-Group service), the current solution has supported automatic deployment.
  C. The VTEP device is both an L2 gateway and an L3 gateway. The non-gateway node is not aware of the VXLAN tunnel and acts only as the forwarding node for VXLAN packets.
  D. Distributed gateway - VxLAN to aggregation, AC on the board, the wireless traffic service accompanying policy is executed on the edge, and tunnel forwarding is recommended.
  B. Distributed gateway - VxLAN to access, independent AC scenario, from the edge to the VN, on the edge to execute the service accompanying policy (the edge needs to subscribe to the IP-Group service), the current solution has supported automatic deployment.

• Question 6:

  When SDN-IWAN is designing BGP routing control, the entire Guqian network structure is adouble-plane structure, which increases the reliability of the network, and the PE of the same plane is preferred when the BGP routing of PE equipment is selected, which is realized through ().

  A. ORIGIN
  B. MED
  C. LocalPre
  D. AS_PATH
  B. MED

• Question 7:

  Which of the following configurations does not belong to the global configuration content of the LAN andWVAN convergence solution ()

  A. AWAN network type
  B. IPSec encryption parameters
  C. WAN BGP routing
  D. Virtual network address pool
  C. WAN BGP routing

• Question 8:

  Which of the following does not belong to network reliability protection technology ()

  A. Load sharing
  B. VPN FRR
  C. PCEP
  D. TE HSB
  C. PCEP

• Question 9:

  For the description of the WLAN network planning scheme in the dormitory/hotel one-in-two scene with a bathroom at the door, the correct one is ()

  A. Select butterfly wing wave AP wall-mounted bathroom corner, height 2.2~2.5m, a single AP covers the left and right 2 rooms
  B. The AP fixes the radio power and configures the maximum EIRP to improve the downlink coverage of the room through the wall, with the worst 5G downlink RSSI being - 65dBm and the worst uplink RSSI being -80dBm
  C. Indoor omnidirectional APs (2*2 models such as 5761-11) are deployed separately in the corridor to ensure roaming continuity
  D. The bathroom relies on 5G for coverage and turns off 2.4G
  D. The bathroom relies on 5G for coverage and turns off 2.4G

• Question 10:

  Which of the following functions cannot be automatically deployed through underlays in the solution C1R19C10?

  A. Physical stacking
  B. Interconnection address
  C. Routing interoperability
  D. Divide the routing area
  A. Physical stacking