Huawei H19-424 Online Practice Questions and Exam Preparation

Huawei H19-424 Online Questions & Answers

• Question 11:

  In order to quickly recover when the configuration is lost, which of the following operations is recommended?

  A. Manually save the equipment configuration on the controller on a regular basis
  B. Formulate regular configuration file backup tasks
  B. Formulate regular configuration file backup tasks

• Question 12:

  In the WLAN Planner tool, under what circumstances will it not prompt whether to enter roaming mode when walking on the 3D floor

  A. The number of APs is greater than 50 or equal to 0
  B. The number of APs is greater than 100 or equal to 0
  C. When the signal strength in the floor is too low
  D. In the case of insulating obstacles
  D. In the case of insulating obstacles

• Question 13:

  The opcode parameter description in SRv6 basic data plan is incorrect ()

  A. The static Opcode needs to be configured within the static segment range to prevent conflicts with the Opcode dynamically allocated by the IGP protocol. The static segment length range is determined by the static static-length parameter of the locator command.
  B. end-op, and end-m need to be statically configured
  C. end, end-x, end-dt4, end-dt6, and end-dx2 can be dynamically assigned or statically configured
  D. The SRv6SID format is Locator:Function:Args, where the Args field is also called Opcode
  D. The SRv6SID format is Locator:Function:Args, where the Args field is also called Opcode

• Question 14:

  In the CloudCapmus solution, NETCONF/YANG does not support the management of Huawei devices

  A. CloudEngine S series switches
  B. CE series switches in data centers
  C. WLAN AP
  D. AR series routers
  E. USG series firewalls
  B. CE series switches in data centers

• Question 15:

  Which of the following designs ensures optimal uplink redundancy in a large campus core?

  A. Dual-homing to aggregation
  B. VLT/stacking between core devices
  C. ECMP to SD-WAN gateway
  D. Single-gateway routing
  A. Dual-homing to aggregation
  B. VLT/stacking between core devices
  C. ECMP to SD-WAN gateway

• Question 16:

  The description of the main function of the configuration translation tool is correct ()

  A. All of the above statements are correct
  B. Used in relocation scenarios, this tool can restore the user's existing network networking status and service characteristics information
  C. It is used in relocation scenarios, mainly used to formulate relocation plans and design the networking structure of new networks
  D. It is used in relocation scenarios, mainly used to translate the configuration of friends in batches and improve the efficiency of relocation
  D. It is used in relocation scenarios, mainly used to translate the configuration of friends in batches and improve the efficiency of relocation

• Question 17:

  Regarding the behavior of END, the wrong statement is ()

  A. end. DT4: EVPN VPLS unicast meteor
  B. end.dx2: the L2AC interface used to divert traffic to the egress PE
  C. end. X SID: A link used to direct traffic to a specific node
  D. end SID: Redirects traffic to nodes based on the IP routing table
  A. end. DT4: EVPN VPLS unicast meteor

• Question 18:

  If the device suddenly goes offline during the configuration delivery process, what error message may be displayed in the configuration result?

  A. Configuration service exception. Contact maintenance engineerenetconf communication failed
  B. Service process faied
  C. The service is abormal
  D. Unrecongnizeinformation
  A. Configuration service exception. Contact maintenance engineerenetconf communication failed

• Question 19:

  In the southbound protocol of the controller, the () protocol collects topology information in real time?

  A. PCEP
  B. BGP-LS
  C. Netconf
  D. Telemetry
  B. BGP-LS

• Question 20:

  Which of the following does not belong to the planning and design of a virtual network?

  A. VN planning and design
  B. Strategy design
  C. Deployment automation design
  C. Deployment automation design