Huawei H19-424 Online Practice Questions and Exam Preparation

Huawei H19-424 Online Questions & Answers

• Question 91:

  What should I do if I want to delete a configuration delivered to the device through NCE- Campus and manually delete the command line on the device ()

  A. Delete it directly in NCE-Campus
  B. Add the command line on the device, and then delete it through NCE-Campus
  C. No other operations are required, NCE-Campus will reconcile
  B. Add the command line on the device, and then delete it through NCE-Campus

• Question 92:

  The description of the NetEngine AR631l device is incorrect ()

  A. The ARR20 version was released.
  B. Support DSVPN feature
  C. Industrial access router.
  D. Fanless design
  A. The ARR20 version was released.

• Question 93:

  The description of the intelligent routing strategy of the LAN andWAN convergence solution is incorrect

  A. Support setting the active/standby link based on the application/application group, andintelligently select the link for data forwarding
  B. LTE can only be used as an escape link
  C. The link intelligent handover conditions include packet loss, delay, and jitter
  D. Support bandwidth conditional traffic selection
  B. LTE can only be used as an escape link

• Question 94:

  The description of the main functions of the configuration generation tool is correct

  A. Through this tool, you can restore the user's existing network networking and service characteristics
  B. It is mainly used to generate configuration scripts in batches
  C. It is mainly used to specify the relocation plan and design the networking structure of the new network
  D. The above statements are correct
  B. It is mainly used to generate configuration scripts in batches

• Question 95:

  In the network plan of iMaster NCE-Campus, what is the recommended networking mode if there is no special isolation requirement??

  A. Four-plane networking
  B. Two-plane networking
  C. Three-plane networking
  B. Two-plane networking

• Question 96:

  In the campus scenario, the correct policy linkage function is ()

  A. When the authentication point and the group policy execution point are not on the same device, you need to use the policy linkage function.
  B. In the policy linkage scenario, you need to set the downstream port type of the Edge device to Extended Access Switch
  C. The policy linkage function means that no matter where you go, the permission to access resources is the same, and it is decoupled from the IP address.
  D. When the authentication point, access point, and group policy execution point are all connected to the device, the policy linkage function should be used
  B. In the policy linkage scenario, you need to set the downstream port type of the Edge device to Extended Access Switch

• Question 97:

  For the sake of WLAN security, if the customer wants to manage the WLAN data in a unified manner, the customer can choose which of the following networking methods:

  A. AC side-attached data is forwarded directly
  B. AC side-attached data tunnel forwarding
  C. Layer 3 networking data is forwarded directly
  D. Layer 2 networking data is forwarded directly
  B. AC side-attached data tunnel forwarding

• Question 98:

  In the virtualization scenario of large and medium-sized campuses, the border node is used for the interconnection between the fabric network and the external network and data forwarding

  A. L3 shared exit
  B. L3 exclusive export
  C. L2 shared exit
  D. L2 exclusive export
  D. L2 exclusive export

• Question 99:

  Which stage is immediately followed by the association stage in the STA access process?

  A. Scan phase (SCAN)
  B. Link Authentication
  C. Access authentication
  D. Key negotiation
  C. Access authentication

• Question 100:

  What is the detection technology used for TEHSB and VPNFRR protection solutions in the SDN-WAN solution?

  A. Ethoam
  B. BFD
  C. Y1731
  D. NQA
  B. BFD