Huawei H12-211 Online Practice Questions and Exam Preparation

Huawei H12-211 Online Questions & Answers

• Question 81:

  When an image file is transmitted over the network using the application software, the TCP/IP encapsulation process is: data data segment data - Packet Data frame Data stream. -

  A. Correct
  B. Error
  A. Correct

• Question 82:

  When the port of the Access type sends a message, it will ().

  A. Send a packet with a tag
  B. Strip the VLAN information of the message and then send it out.
  C. Add the VLAN information of the packet, and then send it out.
  D. Put the PVID information of this port and then send it out.
  B. Strip the VLAN information of the message and then send it out.

• Question 83:

  When two switches use link aggregation technology for interconnection, which of the following conditions do each member port need to meet? (multiple choice)

  A. The number of physical ports connected to the two ends is the same.
  B. The physical ports connected to the two ends have the same rate.
  C. The physical port duplex mode connected to the two ends is the same.
  D. The physical numbers of the physical interfaces connected to the two ends are the same.
  E. The optical modules used by the physical ports connected to the two ends are of the same type.
  A. The number of physical ports connected to the two ends is the same.
  B. The physical ports connected to the two ends have the same rate.
  C. The physical port duplex mode connected to the two ends is the same.

• Question 84:

  Refer to the following DHCP flowchart, the following statement is correct (). (multiple choice)

  

  A. The first step is to send a multicast packet.
  B. The second step is to send a unicast message.
  C. The third step is to send a broadcast message.
  D. The fourth step is to send a unicast message.
  E. The fourth step is to send a broadcast message.
  B. The second step is to send a unicast message.
  C. The third step is to send a broadcast message.
  D. The fourth step is to send a unicast message.

• Question 85:

  display startup MainBoard: Startup system software: sd1:/ar2220-v200r003c00spc200.cc Next startup system software: sd1:/ar2220- v200r003c00spc200.cc Backup system software for next startup: null Startup saved-configuration file: null

  Next startup saved-configuration file: null Startup license file: null Next startup license file: null Startup patch package: null Next startup patch package: null Startup voice-files: null Next startup voice-files: null Refer to the display output. Which statement is false?

  A. The current configuration file has not been saved.
  B. The current startup system software is ar2220-v200r003c00spc200.cc
  C. The next startup system software cannot be changed.
  D. The next startup system software can be changed by using the "startup system software .cc" command.
  C. The next startup system software cannot be changed.

• Question 86:

  On the interface serial 1/0/1 of RTA, the command "ip address unnumbered interface loopback 0" has been configured. Which following statements are correct? (Choose two).

  A. The IP address of interface serial 1/0/1 is 10.1.1.1/24
  B. The IP address of interface serial 1/0/1 is 10.1.1.1/32
  C. The route entry 10.1.1.0/24 exists in RTA's routing-table
  D. The route entry 10.1.1.0/24 does not exist in RTA's routing-table
  B. The IP address of interface serial 1/0/1 is 10.1.1.1/32
  D. The route entry 10.1.1.0/24 does not exist in RTA's routing-table

• Question 87:

  Which of the following commands is used to display the OSPF neighbor relationship establishment?

  A. display ospf neighbor
  B. display ospf brief
  C. display ospf peer
  D. display ospf interface
  C. display ospf peer

• Question 88:

  The authentication scheme, authorization scheme, accounting scheme, HWTACACS, or RADIUS

  server template created on the AR router.

  It will not take effect until it is applied under the domain.

  A. Correct
  B. Error
  A. Correct

• Question 89:

  Which of the following commands can be used to change the device name to huawei?

  A. sysname huawei
  B. hostname huawei
  C. rename huawei
  D. do name huawei
  A. sysname huawei

• Question 90:

  Which of the following commands can be used to view the current configurations on a Huawei router?

  A. display current-configuration
  B. display saved-configuration
  C. view saved-configuration
  D. show startup-configuration
  A. display current-configuration