EMC E20-351 Online Practice Questions and Exam Preparation

EMC E20-351 Online Questions & Answers

• Question 1:

  Which network topology is representative of network devices connected to multiple other network devices?

  A. Bus
  B. Mesh
  C. Ring
  D. Star
  B. Mesh

• Question 2:

  Which EMC software would you use to validate planned changes to an existing SAN?

  A. Automated Resource Manager
  B. Control Center
  C. SAN Advisor
  D. SAN Architect
  C. SAN Advisor

• Question 3:

  For the MDS 9513 multilayer directors, which chassis slots support the integrated supervisor-2 module?

  A. Slots 1 and 2
  B. Slots 12 and 13
  C. Slots 5 and 6
  D. Slots 7 and 8
  D. Slots 7 and 8

• Question 4:

  Click the Exhibit button. Which type of port would these links register as? **Exhibit Mising**

  A. E_Port
  B. F_Port
  C. FL_Port
  D. G_Port
  A. E_Port

• Question 5:

  What is the maximum loop speed for the MDS 9216 integrated 16-port Switching Module on the supervisor?

  A. 10 Gb/s full
  B. 20 Gb/s full
  C. 60 Gb/s full
  D. 80 Gb/s full
  B. 20 Gb/s full

• Question 6:

  What must be done to allow LUN masking for multiple servers attached to a CLARiiON array?

  A. Enable Access Logix
  B. Enable Volume Logix
  C. Turn on default zoning
  D. Zone with WWNs of HBAs to both SPs
  A. Enable Access Logix

• Question 7:

  Your customer is managing a B-Series switch with Web Tools. You are in the discovery phase of a new implementation and need the switch zoning and configuration information. How can this information be retrieved from Web Tools as part of a single report?

  A. Click the Admin radio button and then click "view report"
  B. Click the Info radio button, choose to download report as html or text.
  C. Click the Status radio button, choose to download report as html or text whenprompted
  D. Click the Status radio button, log in and click "view report"
  A. Click the Admin radio button and then click "view report"

• Question 8:

  What are two HBA vendors that EMC supports?

  A. Emulex and JCore
  B. Emulex and QLogic
  C. JCore and IBM
  D. QLogic and JCore
  B. Emulex and QLogic

• Question 9:

  Which McDATA tool is used to manage multiple switches?

  A. Connectrix Manager
  B. Device Manager
  C. Fabric Manager
  D. SAN Manager
  A. Connectrix Manager

• Question 10:

  What are the four architecture layers of ARPA?

  A. Application, Network, Data link, Physical
  B. Application, Presentation, Network, Physical
  C. Application, Session, Transport, Network interface
  D. Application, Transport, Network, Network Interface
  D. Application, Transport, Network, Network Interface