EMC E20-351 Online Practice Questions and Exam Preparation

EMC E20-351 Online Questions & Answers

• Question 41:

  Click the Exhibit button. Which type of connector is the pictured component known as? **Exhibit Missing**

  A. FC connector
  B. LC connector
  C. RJFC connector
  D. SC connector
  D. SC connector

• Question 42:

  Click the Exhibit button. What is indicated by this icon displayed in the PowerPath Monitor Taskbar Icons? **Exhibit Mising**

  A. Degraded
  B. Failed
  C. Server Not Responding
  D. Standard
  C. Server Not Responding

• Question 43:

  In a switched fabric environment, what happens when a N_Port is connected to a F_Port?

  A. The fabric login begins associating the physical address and the network MACaddress.
  B. The fabric login begins associating the physical address and the NAA
  C. The fabric login begins associating the physical address and the World Wide Name.
  D. The fabric login begins associating the World Wide Name and the frame address.
  C. The fabric login begins associating the physical address and the World Wide Name.

• Question 44:

  A customer has a SAN made up of one DMX, one MDS 9506, and 20 Solaris hosts. They will be installing Control Center in the environment. In order to use Control Center to perform masking operations on the DMX, which agents must be present in the Control Center environment?

  A. FCC Agent, SDM Agent
  B. FCC Agent, Storage Agent for Symmetrix
  C. SDM Agent, Storage Agent for Symmetrix
  D. Sun Agent, Storage Agent for Symmetrix
  C. SDM Agent, Storage Agent for Symmetrix

• Question 45:

  Which three member types can be assigned to a zone on MDS-Series?

  A. fcalias, disk and pWWN
  B. fcalias, fWWN and FCID
  C. fcalias, fWWN and pWWN
  D. FCID, fWWN and pWWN
  C. fcalias, fWWN and pWWN

• Question 46:

  In Control Center, which view shows only ports and fabrics that have viable connectivity?

  A. Masking
  B. Path Details
  C. Relationship
  D. Topology
  B. Path Details

• Question 47:

  The Fibre Channel standard defines a layer protocol. Which level serves as the physical layer?

  A. FC-0
  B. FC-1
  C. FC-2
  D. FC-3
  A. FC-0

• Question 48:

  A customer has a new HP server and CLARiiON array being installed using PVLinks as the failover software. What must be done to allow PVLinks to work properly?

  A. ArrayCommPath must be set to 1 and pvtimeout set to 120.
  B. Must change the system type to 10 on the CLARiiON and update the agent.config file.
  C. Must change the system type to 2 on the CLARiiON and update the agent.config file.
  D. Nothing, PVLinks will work properly as the default for HP.
  C. Must change the system type to 2 on the CLARiiON and update the agent.config file.

• Question 49:

  Which architecture allows for initiators to exist in an Ethernet environment while the target storage exists in a Fibre Channel environment?

  A. Bridging
  B. Routing
  C. Switching
  D. Tunneling
  A. Bridging

• Question 50:

  Which file format can be used to export SAN Advisor designs?

  A. .doc
  B. .ini
  C. .ppt
  D. .xls
  D. .xls