Skip to main content

E20-340 Real Exam Questions

Clariion solutiongs implementation

120 questions available · Page 1 of 12

Updated Exam DumpsVerified AnswersPass Guarantee

Get Complete Exam Dumps
Question 1 Single choice

Which Connectrix B-series switch provides a maximum of 8 Gb/s connectivity per port?

  1. A

    DS-5300B

  2. B

    ED-48000B

  3. C

    DS-4900B

  4. D

    DS-5000B

Show answer and explanation

Correct answer: A

Question 2 Single choice

A customer is using MV/A in a remote data center to protect a LUN. They also use the same source LUN for an ISC job to distribute the content of their parts catalogue to 27 regional offices.

What is the maximum number of snapshots of the source LUN they can take if they need to use a SnapView Recovery Session?

  1. A

    5

  2. B

    8

  3. C

    7

  4. D

    6

Show answer and explanation

Correct answer: A

Question 3 Single choice

A customer has a multi-path environment using ESX 4.x native failover software connected to a CX4.

What are the correct settings for this environment?

  1. A

    ArrayCommPath: Enabled
    FailOverModE. 4
    Policy: Fixed or Round Robin

  2. B

    ArrayCommPath: Enabled
    FailOverModE. 2
    Policy: Fixed and Round Robin

  3. C

    ArrayCommPath: Disabled
    FailOverModE. 4
    Policy: Round Robin only

  4. D

    ArrayCommPath: Enabled
    FailOverModE. 2
    Policy: Fixed only

Show answer and explanation

Correct answer: A

Question 4 Single choice

You are at a customer site to perform a CLARiiON model conversion.

Which utility would you have used to plan your course of action?

  1. A

    CPG

  2. B

    HEAT

  3. C

    SWAT

  4. D

    CAP

Show answer and explanation

Correct answer: A

Question 5 Single choice

Which utility is recommended for the alignment of disks in a Windows 2003 SP2 environment?

  1. A

    diskpart

  2. B

    diskpar

  3. C

    fdisk

  4. D

    format

Show answer and explanation

Correct answer: A

Question 6 Single choice

What functionality does single initiator zoning enable?

  1. A

    Controls the HBA discovery/login process

  2. B

    Maximizes state change notification in the fabric

  3. C

    Allows HBAs to force a state change reset on other HBAs

  4. D

    Isolates host I/O from SCSI control commands

Show answer and explanation

Correct answer: A

Question 7 Single choice

Which EMC utility should be used to gather information from a Windows host?

  1. A

    EMCReports

  2. B

    EMCGrab

  3. C

    HEAT

  4. D

    SWAT

Show answer and explanation

Correct answer: A

Question 8 Single choice

A customer has a CX4 series CLARiiON and is experiencing a problem with SPA. Upon arrival you notice that the SPA Fault LED is amber and flashing at a rate of four times a second.

What is the boot state of SPA?

  1. A

    POST Starting OS

  2. B

    OS Booted

  3. C

    Executing BIOS

  4. D

    FLARE Driver Complete

Show answer and explanation

Correct answer: A

Question 9 Single choice

Which statement accurately describes DAE3P enclosures?

  1. A

    Supported on CX3 and CX4 series arrays

  2. B

    Support the 2 Gb/s LCC card

  3. C

    Contain 14 disk drives

  4. D

    Support FC, ATA, Flash drives, and SATA-II drives

Show answer and explanation

Correct answer: A

Question 10 Single choice

Which Connectrix B-series switch serves as a platform for EMC Invista and EMC RecoverPoint?

  1. A

    AP-7600B

  2. B

    MP-7500B

  3. C

    DS-5000B

  4. D

    DS-4900B

Show answer and explanation

Correct answer: A