EMC E20-340 Online Practice Questions and Exam Preparation

EMC E20-340 Online Questions & Answers

• Question 91:

  On a CX4 with only SnapView enabled what is the maximum number of replicas (snapshots and clones) of a LUN that can be configured and made available to hosts?

  A. 80
  B. 16
  C. 64
  D. 72
  A. 80

• Question 92:

  A customer's Windows 2008 server has four NICs connected to the private subnet used for iSCSI traffic. Server IP parameters are left at the default settings. How will iSCSI I/O traffic be distributed across the NICs?

  A. One NIC will carry iSCSI traffic and the rest will be in standby.
  B. The four NICs will carry iSCSI traffic in a round-robin pattern.
  C. The four NICs will be divided into two active/passive pairs.
  D. iSCSI traffic will be balanced across all four NICs.
  A. One NIC will carry iSCSI traffic and the rest will be in standby.

• Question 93:

  Refer to the exhibit.

  

  By default how many hosts will see HLU1?

  A. 5
  B. 4
  C. 1
  D. 2
  A. 5

• Question 94:

  A new customer has expressed interest in upgrading their FCIP infrastructure. Currently their regional office supports over 180 users. They would like to obtain storage media encryption capability and eventually add RecoverPoint. Which solution would you recommend?

  A. MDS-9506 with the multi-services switching module
  B. MDS-9506 with the storage services module
  C. MDS-9509 with the storage services node
  D. MDS-9509 with an MDS 48-port FC module
  A. MDS-9506 with the multi-services switching module

• Question 95:

  Refer to the exhibit.

  

  Which statement describes the state of the clone?

  A. It has been modified by its owning host.
  B. It cannot be incrementally synchronized.
  C. It contains exactly the same data as the source LUN.
  D. It uses the same drive type as the source LUN.
  A. It has been modified by its owning host.

• Question 96:

  What is the maximum number of storage systems supported per domain by Unisphere?

  A. 100
  B. 80
  C. 40
  D. 120
  A. 100

• Question 97:

  Which two scenarios can be implemented in iSCSI and FC SAN?

  a.

  Single server connected to both a CLARiiON FC and a CLARiiON iSCSI storage system.

  b.

  NIC and iSCSI HBA connections mixed in the same server.

  c.

  Servers with iSCSI HBAs and servers with NICs connected to the same iSCSI storage system.

  d.

  Servers with HBAs and servers with iSCSI HBAs connected to the same storage system.

  A. C and D
  B. A and C
  C. A and B
  D. B and D
  A. C and D

• Question 98:

  Which EMC utility should be used to gather information from a Windows host?

  A. EMCReports
  B. EMCGrab
  C. HEAT
  D. SWAT
  A. EMCReports

• Question 99:

  What functionality does single initiator zoning enable?

  A. Controls the HBA discovery/login process
  B. Maximizes state change notification in the fabric
  C. Allows HBAs to force a state change reset on other HBAs
  D. Isolates host I/O from SCSI control commands
  A. Controls the HBA discovery/login process

• Question 100:

  Refer to the exhibit.

  

  A customer has a two-fabric SAN with hosts and a single CX4-480 cabled redundantly to both switches. SPA port 0 is plugged in to port 0 of Switch A. According to EMC best practice, which SP port should be plugged in to port 0 of Switch B?

  A. A1
  B. B0
  C. B1
  D. A2
  A. A1