AX0-100 Real Exam Questions and Verified Answers

Question 1 Single choice

What type of camera is recommended to be used in an extremely hot environment?

A
Cameras that end with -E
B
Cameras that end with -V
C
Cameras that end with -R
D
Cameras that end with -C

Show answer and explanation

Correct answer: D

Question 2 Single choice

A P-iris lens is

A
An iris with higher light sensitivity.
B
Axis' standard for DC-iris.
C
A DC-iris with feedback.
D
An iris specially made for zoom lenses.

Show answer and explanation

Correct answer: C

Question 3 Single choice

An installer needs a camera to monitor a hallway in an office complex. The hallway is 2.5 m (8 ft 2 in) wide.
The customer wants to be able to identify people (80 pixels per face).

What is the minimum resolution needed to meet this requirement?

A
1024x768
B
1280x720
C
1920x1024
D
800 x 600

Show answer and explanation

Correct answer: B

Question 4 Single choice

Adding network surveillance cameras to an existing Ethernet network

A
Is not recommended, since bandwidth demands from the surveillance video would likely congest the network.
B
Will benefit from using VLANs, to keep the surveillance video separate from other network traffic, reducing the risk for network congestion.
C
Will cause unacceptable video latency, due to the amount of UDP traffic taking precedence on the network.
D
Will benefit from establishing VPN connections to the cameras, reducing the risk of malicious users eavesdropping on the video.

Show answer and explanation

Correct answer: B

Question 5 Single choice

In setting up PTZ control for an Axis encoder, it's very easy to overlook a very important step in the configuration process. After properly connecting the communication wires to the encoder, the next recommended step in the setup is:

A
Downloading the correct Device ID from the Axis website
B
Setting the Baud Rate to match the analog PTZ' s
C
Setting the Device ID to match the analog ID
D
Uploading the correct PTZ driver

Show answer and explanation

Correct answer: D

Question 6 Single choice

When viewing live Motion JPEG video from an Axis camera, if the image looks pixilated with no digital zoom, which of the following settings would best address the issue?

A
Adjusting the Group of Video (GOV) length from 32 to 4
B
Increasing color saturation
C
Adjusting the image contrast
D
Decreasing the image compression

Show answer and explanation

Correct answer: D

Question 7 Single choice

Increased noise levels in a scene will increase the

A
Light sensitivity.
B
Contrast level.
C
Bandwidth usage.
D
Brightness level.

Show answer and explanation

Correct answer: C

Question 8 Multiple choice

Increase of bandwidth and storage can be a result of (Choose two)

A
Changing from Motion JPEG to H.264.
B
Arctic Temperature Control.
C
High noise level.
D
The use of High PoE.
E
Image resolution.

Show answer and explanation

Correct answers: C, E

Question 9 Single choice

A customer has strict requirements of 30 fps for recorded video.

Which encoder choice would they select if they wanted three streams, per every one encoded channel, of D1 resolution video run at 30 fps in H.264?

A
AXISM7210
B
AXISP7210
C
AXISP7214
D
AXISQ7406

Show answer and explanation

Correct answer: D

Question 10 Single choice

Before upgrading firmware, which of the following should be checked?

A
Verify that the Video Management Software (VMS) supports the latest firmware version
B
Verify that both rack mounted and standalone servers support the latest firmware version
C
Verify that the IEEE 802.3af compliant PoE switch supports the latest firmware version
D
Verify that the SD card is properly ejected before the upgrade is started

Show answer and explanation

Correct answer: A