Riverbed 830-01 Online Practice Questions and Exam Preparation

Riverbed 830-01 Online Questions & Answers

• Question 191:

  Which of the following is Endpoint alarm?

  A. Locked secure vault
  B. Firewalled status
  C. Network interface error
  D. Temperature
  E. Memory paging
  B. Firewalled status

• Question 192:

  While performing a health check for a Steelhead appliance at a remote site, you noticed some of the pass-through traffic should have been optimized. The pass-through reason for the suspicious traffic is "SYN on WAN side". Upon further investigating, you also noticed that all of the traffic initiated at the data center is pass-through while all of the traffic initiated at the remote site is optimized. There is only one path between the data center and the remote site and both Steelhead appliance are physically in-path. What are the possible causes? (Select 2)

  A. There is a pass-through in-path rule configured on the data center Steelhead appliance.
  B. There is a pass-through in-path rule configured on the remote site Steelhead appliance.
  C. There is a pass-through peering rule configured on the data center Steelhead appliance.
  D. The LAN and WAN interfaces on the data center Steelhead appliance are reversed.
  E. The LAN and WAN interfaces on the remote site Steelhead appliance are reversed.
  A. There is a pass-through in-path rule configured on the data center Steelhead appliance.
  D. The LAN and WAN interfaces on the data center Steelhead appliance are reversed.

• Question 193:

  In configuring failover settings, which of the following ports is set as the default for communicating with the backup Steelhead appliance?

  A. 7600
  B. 7744
  C. 7766
  D. 7820
  E. 7850
  D. 7820

• Question 194:

  Two Steelhead appliances deployed in-path at different offices cannot auto-discover each other. What technique can be used to "force" the two Steelhead appliances to optimize traffic between each other?

  A. Change the TCP port the Steelhead appliances use for their in-path connections to 7810
  B. Disable the auto-discovery feature on the Steelhead appliances
  C. Create auto-discovery rules that map to each Steelhead appliance's in-path IP address
  D. Create fixed-target rules on each Steelhead appliance using the in-path IP address of the other Steelhead appliance, and use port 7800
  E. Use the "enable probe" command from the CLI
  D. Create fixed-target rules on each Steelhead appliance using the in-path IP address of the other Steelhead appliance, and use port 7800

• Question 195:

  You have a SteelCentral Controller for SteelHead Mobile with a policy that includes auto-discovery rules, enabled Location Awareness and set a minimum latency of 10ms. Your client is now in the branch office, has received this policy and the nearest SteelHead is 2 ms away. What will happen to connections?

  A. The branch steelhead will pass through the traffic because of the RVBD in-path rule.
  B. The SteelHead Mobile client will bypass the branch SteelHead using Enhanced Auto Discovery.
  C. The SteelHead Mobile client will not optimize, letting the branch SteelHead do the optimization.
  D. The branch SteelHead will shut-down the SteelHead mobile client services as they are not needed in branch.
  E. The SteelHead Mobile client will optimize as normal, sharing information with the branch SteelHead.
  C. The SteelHead Mobile client will not optimize, letting the branch SteelHead do the optimization.

• Question 196:

  When upgrading from a Steelhead 5050 appliance to a Steelhead 6050 appliance what can be migrated to the new appliance? (Select 2)

  A. Datastore
  B. Licenses
  C. Network configuration
  D. Optimization configurations
  E. Serial numbers
  C. Network configuration
  D. Optimization configurations

• Question 197:

  -- Exhibit

  

  -- Exhibit -Refer to the exhibit. A Steelhead administrator has decided to implement two Interceptor appliances and one Steelhead appliance on his data center. After configuring the Interceptor appliances, and the Steelhead appliance, he decided to check if the connections are being forwarded appropriately. What happened? (Select 2)

  A. The connection from client 172.16.12.99 to server 172.19.88 was optimized by Steelhead appliance 172.16.10.101.
  B. The connection from client 172.16.19.88 to server 172.16.12.99 was optimized by Steelhead appliance 172.16.10.101.
  C. The connection was not optimized because of the GRE tunnel.
  D. The connection was optimized because of the GRE tunnel.
  A. The connection from client 172.16.12.99 to server 172.19.88 was optimized by Steelhead appliance 172.16.10.101.
  D. The connection was optimized because of the GRE tunnel.

• Question 198:

  How many in-path rules will a WAN-initiated (i.e. SYN packet arrives at a WAN port of an In-path interface) single connection match? Assume no packet ricochet occurs (i.e. the SYN travels through the Interceptor appliance once).

  B. 1
  C. 2
  D. 3
  A

• Question 199:

  What is the CLI command for starting the Configuration Wizard?

  A. # configuration wizard start
  B. (config) # configuration jump-start
  C. # configuration start
  D. (config) # wizard start
  E. restart clean
  B. (config) # configuration jump-start

• Question 200:

  -- Exhibit

  

  -- Exhibit -Refer to the exhibit. What statements are true? (Select 2)

  A. This connection started on USER1 and is being optimized between SH11 and SH12.
  B. This connection started on USER1 and is being optimized between Steelhead Mobile Client on USER1 and SH11.
  C. This connection started on USER1 and is being optimized between Steelhead Mobile Client on USER1 and SH12.
  D. This connection will show as "passtrough" on SH12.
  E. This connection will not appear on SH12.
  C. This connection started on USER1 and is being optimized between Steelhead Mobile Client on USER1 and SH12.
  E. This connection will not appear on SH12.