Avaya 76940X Online Practice Questions and Exam Preparation

Avaya 76940X Online Questions & Answers

• Question 31:

  A support engineer is tasked to power down a VSP switch using the management tools available for the ACP 4200. Which statement is true about how the engineer would accomplish this task?

  A. Login to Enterprise Device Manager and use the chassis power down option.
  B. Login to Servertech PDU Web Interface and use the outlet control option.
  C. This can only be done if the engineer is on-site to switch off the VSP's power switch.
  D. This can only be done if the engineer is on-site to remove the VSP's power cable.
  A. Login to Enterprise Device Manager and use the chassis power down option.

• Question 32:

  Which command will verify VSP adjacencies?

  A. set isis adjacencies
  B. show isis adjacencies
  C. show isis routes
  D. show ospf routes
  B. show isis adjacencies

• Question 33:

  A support engineer is upgrading a PodFX 3.1 system to ACP 4200 4.0. The system has two pairs of ServerTech PDUs. Which statement about the PDU firmware file describes the upgrade process that the engineer needs to follow?

  A. It will need to be uploaded to all 4 PDUs.
  B. It will need to be uploaded to each PDU Management Web Interface.
  C. It will need to be uploaded to one PDU. This PDU will then distribute the file to the remaining 3 PDUs.
  D. It will need to be uploaded to Orchestrator. Orchestrator will then distribute the file to the 4 PDUs.
  C. It will need to be uploaded to one PDU. This PDU will then distribute the file to the remaining 3 PDUs.

• Question 34:

  While configuring the MSC to use NTP you see the NTP synching fail. What is the most common cause of this problem?

  A. VMware is not supporting NTP.
  B. The VSPs are rejecting the NTP messages.
  C. The NTP server is installed outside of the ACP 4200.
  D. The customer has a firewall between the MSC and the customer's NTP server.
  B. The VSPs are rejecting the NTP messages.

• Question 35:

  As an engineer working with the ACP 4200, you see that the backup plan in place for the virtual machines relies heavily on VMware snapshots. Which statement describes Avaya's position on using VMware snapshots for a backup solution?

  A. VMware snapshots are the most robust backup solution for the ACP 4200.
  B. VMware snapshots should never be used as a backup and recovery method.
  C. VMware snapshots should be stored off site to ensure business continuity.
  D. VMware snapshots should be stored on the ACP 4200 they are backing up.
  B. VMware snapshots should never be used as a backup and recovery method.

• Question 36:

  A PodFX system is being upgraded to ACP 4.0 and Avaya Orchestrator needs to have an IP address assigned. What would Avaya recommend for Orchestrator's IP address?

  A. Assign an unused IP address in the Management VLAN range for the Orchestrator.
  B. Re-use the PVM IP address for Orchestrator.
  C. Re-use the VPFM IP addresses for Orchestrator.
  D. There is no recommendation on which IP address to use for Orchestrator.
  A. Assign an unused IP address in the Management VLAN range for the Orchestrator.

• Question 37:

  Before downloading and applying a PDU patch, you must determine the type of PDU the ACP 4200 is using. Which two kinds of PDUs are valid? (Choose two.)

  A. Switched
  B. Synchronized
  C. Smart
  D. Stationary
  E. Static
  B. Synchronized
  D. Stationary

• Question 38:

  Which two statements describe Product Support Notices (PSNs) from Avaya? (Choose two.)

  A. PSNs provide information about issues that have been reported.
  B. PSNs are typically issued along with the Release Notes of a product.
  C. PSNs may contain potential fixes or workarounds.
  D. PSNs are only available on the psn.avaya.com web site.
  A. PSNs provide information about issues that have been reported.
  C. PSNs may contain potential fixes or workarounds.

• Question 39:

  What would a support engineer expect to find when using MSC to support, troubleshoot and maintain the ACP 4200 4.0?

  A. All current and previous license files
  B. Software library store
  C. Pod Upgrade Manager (PUM)
  D. VMware vSphere client application for VMware 6.5
  D. VMware vSphere client application for VMware 6.5

• Question 40:

  A support engineer is upgrading a PodFX 3.1 system to ACP 4200 4.0. In preparation for upgrading the HPE server firmware, the engineer notices that another colleague has already downloaded files. Which two files should the engineer use? (Choose two.)

  A. hp-firmware-ilo4-2.60-1.1.i386.rpm
  B. bp-avaya-dl360g9-g10-ACP-4_0-New-only.iso
  C. SP99382.exe
  D. ACP_40_ilo4_261.bin
  B. bp-avaya-dl360g9-g10-ACP-4_0-New-only.iso
  D. ACP_40_ilo4_261.bin