Avaya 76940X Online Practice Questions and Exam Preparation

Avaya 76940X Online Questions & Answers

• Question 1:

  A support engineer logs into the System Manager (SMGR) application on an ACP 4.0 system with the intention of checking VPFM warning messages for the VSP switch. The engineer is unable to see the VPFM link in SMGR. What could be causing this Problem?

  A. The VPFM link was removed from SMGR as part of the upgrade of the system to ACP 4.0.
  B. The engineer's SMGR account has insufficient access privileges to launch VPFM.
  C. The VPFM link has been renamed as Orchestrator in ACP 4.0.
  D. The engineer should connect to VPFM directly and not through SMGR.
  B. The engineer's SMGR account has insufficient access privileges to launch VPFM.

• Question 2:

  Which two upgrade tasks are required before upgrading the ESXi servers to 6.5? (Choose two.)

  A. Upgrade the HP Server iLO firmware.
  B. Upgrade the PDU firmware.
  C. Upgrade the switch firmware.
  D. Upgrade the HP Server firmware.
  A. Upgrade the HP Server iLO firmware.
  C. Upgrade the switch firmware.

• Question 3:

  To use the Management Server Console (MSC) as their time source, how would the engineer configure the ESXi hosts?

  A. Login to the MSC, run the time _configuration.bat script.
  B. Login to the MSC, set Services > Time configuration > NTP Clients = IP addresses of the ESXi hosts.
  C. Login to the ESXi Hosts using the CLI, run the time_configuration.sh script.
  D. Login to vCenter server using the Web UI, set host > manage > Time configuration = IP address of the MSC.
  B. Login to the MSC, set Services > Time configuration > NTP Clients = IP addresses of the ESXi hosts.

• Question 4:

  Which equipment is standard in a new ACP 4200 4.0?

  A. IP 7254
  B. VSP 4850
  C. IP 8284
  D. VSP 7024
  B. VSP 4850

• Question 5:

  You are receiving High Availability warnings in the vSphere client. To resolve the issue, what would you try first?

  A. Stop and restart VMs.
  B. Ensure Storage Array is reachable from VSP.
  C. In the cluster, check cabling between server and storage array.
  D. Right-click each Host in the cluster and select Reconfigure for HA.
  B. Ensure Storage Array is reachable from VSP.

• Question 6:

  When deploying the vCenter update, there are certain parameters that must be used. Which IP address should be used for the Network 1 IP Address?

  A. The Localhost IP address for your datacenter subnet IP interface
  B. The datacenter facing IP interface IP address and a 32 bit mask
  C. The Internet facing IP interface IP address and mask
  D. A temporary IP, from the Management subnet, not already in use
  D. A temporary IP, from the Management subnet, not already in use

• Question 7:

  Which statement about the LifeCycle Manage Workbook (LCM) and any time there is a change made to the ACP 4200 implementation is true?

  A. The LCM only needs to be updated when hardware devices are changed.
  B. Retrieve the LCM from ACP 4200 support prior to making any changes.
  C. The LCM is only needed when receiving the ACP 4200.
  D. Update the LCM with all changes and submit it via email to [email protected].
  D. Update the LCM with all changes and submit it via email to [email protected].

• Question 8:

  As part of the upgrade of a PodFX 3.1 system to ACP 4200 4.0, a support engineer is tasked with upgrading the ESXi hosts to VMware ESXi 6.5.

  Where would the engineer obtain the necessary upgrade files?

  A. From the Avaya support website
  B. From the VMware support website
  C. From the ACP 4.0 Upgrade DVD media
  D. From the HP support website
  C. From the ACP 4.0 Upgrade DVD media

• Question 9:

  As part of a routine weekly maintenance test for the ACP 4200, a support engineer has been instructed to verify that the VMotion VMKernels for all ESXi hosts are reachable from each other using pings. During the latest maintenance test, the engineer notices that some of the pings are failing.

  Which potential impact would this have on the ACP 4200?

  A. There will be no impact on the ESXi hosts, but the VSPs may reboot periodically.
  B. vMotion may not work as expected.
  C. The ESXi hosts may not be reachable from vCenter Server appliance.
  D. The ESXi hosts may reboot periodically.
  C. The ESXi hosts may not be reachable from vCenter Server appliance.

• Question 10:

  Which two statements are considered backup strategy best practices? (Choose two.)

  A. Create backups of the ACP 4200 system on the storage system inside the pod.
  B. Do not backup to the ACP 4200 itself, backup to an external location.
  C. No backups need to be made as the systems in ACP 4200, and the Pod are already reliable.
  D. VMware snapshots are recommended for virtual appliance backups.
  E. Determine business continuity, compliance, and regulatory considerations.
  B. Do not backup to the ACP 4200 itself, backup to an external location.
  D. VMware snapshots are recommended for virtual appliance backups.