Avaya 76940X Online Practice Questions and Exam Preparation

Avaya 76940X Online Questions & Answers

• Question 11:

  Before a switch that has failed can be replaced with a new switch, what needs to be done?

  A. The replacement switch needs to have its configs defaulted.
  B. The remaining switch that is not being replaced needs to have its configs reset to defaults.
  C. The switch can be replaced without any preparation.
  D. The switch needs to have the appropriate backup restored on it.
  A. The replacement switch needs to have its configs defaulted.

• Question 12:

  What is the first step in upgrading the VSP switches in an Avaya ACP 4200?

  A. Verify redundancy is active.
  B. Power down secondary device.
  C. Verify connectivity to NTP server.
  D. Disable Telnet access.
  A. Verify redundancy is active.

• Question 13:

  A support engineer is experiencing some difficulty correlating the error messages and logs from different systems in the ACP 4200. What should the engineer do to fix this problem?

  A. Use the VMware integrated time server to supply time to all systems.
  B. Manually synchronize the time on all the ACP systems to a correct vCenter.
  C. Use the MSC NTP service tied to external NTP time servers to synchronize the time on all systems.
  D. The VSP switches have NTP servers built into them, and all other systems can use NTP to synchronize to them.
  B. Manually synchronize the time on all the ACP systems to a correct vCenter.

• Question 14:

  Which benefit does the available G450 Gateway provide to the ACP 4200 solution?

  A. IP to H.323 translation
  B. SIP to IP transition
  C. IP to POTS transition
  D. SIP to SIP negotiation
  B. SIP to IP transition

• Question 15:

  A maintenance window had been scheduled to allow for the upgrade of the firmware of one of the VSP switches in the ACP. However, steps were not taken to avoid receiving unnecessary notifications during this period. As a result, when the upgrade process started the VSP switch shows multiple critical alerts.

  At this point, what would a support engineer do to reduce the amount of these unwanted alerts?

  A. Use the Post-Event Downtime feature in Orchestrator.
  B. Use the Mass Acknowledgments feature in Orchestrator.
  C. Use the Recurring Downtime feature in Orchestrator.
  D. The engineer will have to wait for the upgrade process to complete.
  B. Use the Mass Acknowledgments feature in Orchestrator.

• Question 16:

  A support engineer is tasked with upgrading a CPOD 2.1 system to ACP 4200 4.0. Which statement about the upgrade process is true?

  A. Upgrading a CPOD 2.1 system to ACP 4200 4.0 is supported, and a direct upgrade path is supported.
  B. Upgrading a CPOD 2.1 system to ACP 4200 4.0 is supported only if the Rack enclosure is replaced with a new 48 Inch Deep Model.
  C. Upgrading a CPOD 2.1 system to ACP 4200 4.0 is not supported.
  D. Upgrading a CPOD 2.1 system to ACP 4200 4.0 is supported, but a direct upgrade path is only partially supported.
  B. Upgrading a CPOD 2.1 system to ACP 4200 4.0 is supported only if the Rack enclosure is replaced with a new 48 Inch Deep Model.

• Question 17:

  A support engineer is upgrading a PodFX 3.1 system to ACP 4200 4.0. The engineer is upgrading the VMware vCenter Server from Release 6.0 to Release 6.5. Which two statements about the vSphere Update Manager (VUM) data migration are true? (Choose two.)

  A. The VMware-Migration-Assistant executable file is run on the Management Server Console where the current version of VUM is currently running.
  B. The VMware-Migration-Assistant executable file is run on the ESXi host where the current version of VUM is currently running.
  C. VUM data migration is optional.
  D. VUM data migration is mandatory.
  A. The VMware-Migration-Assistant executable file is run on the Management Server Console where the current version of VUM is currently running.
  D. VUM data migration is mandatory.

• Question 18:

  A support engineer logs into the System Manager (SMGR) application on an ACP 4.0 system with the intention of checking Orchestrator warning messages for the Nimble Storage system. The engineer is unable to see the Orchestrator link in SMGR.

  What is causing this problem?

  A. The engineer's SMGR account has insufficient access privileges to launch Orchestrator.
  B. The Orchestrator link is labeled as Nagios in ACP 4.0.
  C. The Orchestrator link was removed from SMGR as part of the upgrade of the system to ACP 4.0.
  D. The engineer should connect to Orchestrator directly and not via SMGR.
  C. The Orchestrator link was removed from SMGR as part of the upgrade of the system to ACP 4.0.

• Question 19:

  Which feature in Avaya Orchestrator allows a support engineer to select the management protocols and credentials of the equipment that is to be monitored within the ACP 4200?

  A. Monitoring Setup
  B. Orchestrator Security Center
  C. Device and Credentials Editor
  D. ACP Configuration Wizard
  D. ACP Configuration Wizard

• Question 20:

  Which functionality does Management Server Console (MSC) provide?

  A. Common installation, upgrade and infrastructure maintenance tasks on the ACP 4200, and delivery of all the software and firmware binaries including main releases and patches for ACP 4200
  B. MIB browser and MIB query tool which can be used to browse and query the MIB
  C. Discovery and visualization of all ACP 4200 components including routers, switches, Avaya Aura?servers and applications, storage arrays, IP telephones, Avaya Session Border controllers, Media gateways and VM hosts.
  D. Layered dashboards for health monitoring, diagnostics, performance, analytics and reporting
  C. Discovery and visualization of all ACP 4200 components including routers, switches, Avaya Aura?servers and applications, storage arrays, IP telephones, Avaya Session Border controllers, Media gateways and VM hosts.