A maintenance window has been scheduled to allow for the upgrade of the firmware of one of the VSP switches in the ACP.
What can be done to avoid receiving unnecessary notifications during this period?
A. Disable Syslog messages on the VSP switch before performing the upgrade.
B. Disable SNMP trap notification on the VSP switch before performing the upgrade.
C. Use the Acknowledgments feature in the Orchestrator to acknowledge any notifications immediately.
D. Use the Schedule Downtime feature in Orchestrator to schedule period of expected service interruption.
A maintenance window had been scheduled to allow for the upgrade of the firmware of one of the VSP switches in the ACP. However, steps were not taken to avoid receiving unnecessary notifications during this period. As a result, when the upgrade process started the VSP switch shows multiple critical alerts.
At this point, what would a support engineer do to reduce the amount of these unwanted alerts?
A. Use the Post-Event Downtime feature in Orchestrator.
B. Use the Mass Acknowledgments feature in Orchestrator.
C. Use the Recurring Downtime feature in Orchestrator.
D. The engineer will have to wait for the upgrade process to complete.
Before a switch that has failed can be replaced with a new switch, what needs to be done?
A. The replacement switch needs to have its configs defaulted.
B. The remaining switch that is not being replaced needs to have its configs reset to defaults.
C. The switch can be replaced without any preparation.
D. The switch needs to have the appropriate backup restored on it.
As part of a routine weekly maintenance test for the ACP 4200, a support engineer has been instructed to verify that the VMotion VMKernels for all ESXi hosts are reachable from each other using pings. During the latest maintenance test, the engineer notices that some of the pings are failing.
Which potential impact would this have on the ACP 4200?
A. There will be no impact on the ESXi hosts, but the VSPs may reboot periodically.
B. vMotion may not work as expected.
C. The ESXi hosts may not be reachable from vCenter Server appliance.
D. The ESXi hosts may reboot periodically.
A PodFX system is being upgraded to ACP 4.0 and Avaya Orchestrator needs to have an IP address assigned.
What would Avaya recommend for Orchestrator's IP address?
A. Assign an unused IP address in the Management VLAN range for the Orchestrator.
B. Re-use the PVM IP address for Orchestrator.
C. Re-use the VPFM IP addresses for Orchestrator.
D. There is no recommendation on which IP address to use for Orchestrator.
A customer reports that several VMs have become Unreachable or Invalid in vCenter.
What would you check or try first to solve this problem?
A. From the Host, stop and start the monitoring agent.
B. On the Host, from vCenter, try to re-scan the Datastores.
C. Place the host in maintenance mode.
D. Shut the host down and restart it.
A support engineer logs into the System Manager (SMGR) application on an ACP 4.0 system with the intention of checking Orchestrator warning messages for the Nimble Storage system. The engineer is unable to see the Orchestrator link in SMGR.
What is causing this problem?
A. The engineer's SMGR account has insufficient access privileges to launch Orchestrator.
B. The Orchestrator link is labeled as Nagios in ACP 4.0.
C. The Orchestrator link was removed from SMGR as part of the upgrade of the system to ACP 4.0.
D. The engineer should connect to Orchestrator directly and not via SMGR.
A support engineer is planning to migrate to Avaya Orchestrator from POS Applications.
What are three tasks required as part of setting up Orchestrator? (Choose three.)
A. Add to Storage Array.
B. Add to System Manager.
C. Change the Web interface's orchestratoradmin password.
D. Change the CLI's root and aoadmin password.
E. Activate the License.
You are receiving High Availability warnings in the vSphere client.
To resolve the issue, what would you try first?
A. Stop and restart VMs.
B. Ensure Storage Array is reachable from VSP.
C. In the cluster, check cabling between server and storage array.
D. Right-click each Host in the cluster and select Reconfigure for HA.
A support engineer logs into Avaya Orchestrator and clicks on the Service Availability icon for the Power Supply of a G450 device.
What information is the engineer looking for?
A. The current state of the power supply (OK, Warning, Unknown or Critical).
B. The amount power (in Watts) that the power supply is using.
C. A percentage breakdown of the state of the power supply (OK, Warning, Unknown or Critical) over a period of time.
D. A list of other services that are available for the G450 device.
Nowadays, the certification exams become more and more important and required by more and more enterprises when applying for a job. But how to prepare for the exam effectively? How to prepare for the exam in a short time with less efforts? How to get a ideal result and how to find the most reliable resources? Here on Vcedump.com, you will find all the answers. Vcedump.com provide not only Avaya exam questions, answers and explanations but also complete assistance on your exam preparation and certification application. If you are confused on your 76940X exam preparations and Avaya certification application, do not hesitate to visit our Vcedump.com to find your solutions here.