Avaya Avaya Certifications 7004.1 Questions & Answers

• Question 41:

  Click the Exhibit button.

  

  A customer requires that two of its employees be able to place toll calls to Australia, while all other employees are restricted to local dialing only. The customer's Communication Server 1000 is programmed with all required NCOS, FRL and Route List Index (RLI). What is the most restrictive NCOS to assign to the two employees required to make toll call Australia given the tables, assuming that the call must complete over RLI 2 and the user must be able to use any RLI 2 entry to reach Australia?

  A. NCOS 1

  B. NCOS 2

  C. NCOS 3

  D. NCOS 4

  E. NCOS 5

  Correct Answer: E

• Question 42:

  Click the Exhibit button.

  

  

  Given a customer's Coordinating Dialing Plan shown in the exhibit, if a Station user at CDP Switch #2 dials 327-3249, which route list used and where will the call terminate?

  A. Route List 2 will be utilized and the call will terminate at CDP Switch #2

  B. Route List 10 will be utilized and the call will terminate at CDP Switch #3

  C. Route List 5 will be utilized and the call will terminate at CDP Switch #2

  D. Route List 1 will be utilized and the call will terminate at CDP Switch #3

  Correct Answer: A

• Question 43:

  You are configuring a bandwidth management zone on a Communication Server 1000 RIs. 7 x Call Server.

  The Call Server zones will be used for interface communications between endpoints (IP telephones and

  gateways).

  Which is the preferred bandwidth management strategy, assuming the network has adequate bandwidth?

  A. Best Quality (BQ)

  B. Best Bandwidth (BB)

  C. Allocated Bandwidth (AB)

  D. Best Effort (BE)

  Correct Answer: A

• Question 44:

  Click the Exhibit button. %

  

  You are asked to review the existing trunk information for your customer. According to the Element Manager screen capture shown in the exhibit, which type of trunk is this?

  A. Direct Inward Dial

  B. Virtual Trunk

  C. Recorder Announcement

  D. Central Office Trunk

  Correct Answer: B

• Question 45:

  Click the Exhibit button.

  

  Consider a customer's dialing plan and programming shown in the exhibit. Assuming all required Route List indexes have been programmed, why will the station call of 6-544- 3333 not complete?

  A. ACI Access Code was not dialed.

  B. NXX 544 is not provisioned in the customer's database

  C. 3333 is Denied under the SDRR programming

  D. AC2 Access Code was not dialed

  Correct Answer: B

• Question 46:

  Click the Exhibit button.

  

  A customer wants to allow a station user to save an incoming number (Off-Net, Local Number) to their Personal Directory and afterwards use it to place an outgoing call without having to perform an manual manipulation to the number. Consider the customer dialing plan shown in the exhibit. Communication Server 1000 is configured for DAPC = YES in the Route Data Block.

  With reference to the DAPC Table options in the exhibit, which Dial Access Prefix on CLID (DAPC) table should be used?

  A. Table 1

  B. Table 2

  C. Table 3

  D. Table 4

  Correct Answer: C

• Question 47:

  When attempting to program Zone Based Dialing through Element Manager, the user is unable to access

  the Dialing Configuration Page.

  What needs to be configured before the Dialing Configuration Page can be accessed, assuming the

  ZBN_PACKAGE (420) is already installed?

  A. Number Zones need to be configured

  B. The CDP dialing plan needs to be programmed.

  C. The ZBN_PACKAGE (420) needs to be disabled.

  D. Nothing, Zone Based Dialing cannot be configured in Element Manger.

  Correct Answer: A

• Question 48:

  Which IP Peer Networking component provides the centralized call routing for Communication Server 1000 systems in an Avaya Aura network solution?

  A. Call Manger

  B. System manager

  C. SessionBorder Controller

  D. Session Manager

  Correct Answer: D

• Question 49:

  Click the Exhibit button.

  You are adding ten digital telephones as required by a customer work order. The customer wants the user

  to see the calling or called name associated with the number dialed.

  Which Customer Level feature from the list shown in the exhibit, must first be provisioned before you can

  enter names in at the station level?

  A. Call Redirection

  B. Feature Options

  C. Listed Directory Number

  D. Call Party Name Display

  Correct Answer: D

• Question 50:

  Click the Exhibit button.

  

  Given the customer's programmed database shown in the exhibit and where AC1 = 9, which RLI will call complete when a station user dials 9-814-666-3434?

  A. RLI 2

  B. RLI 3

  C. RLI 4

  D. RLI 9

  E. Call will not complete as dialed

  Correct Answer: E