Avaya Avaya Certifications 7004.1 Questions & Answers

• Question 21:

  Due to Directory Number conflicts in the Communication Server 1000 network, the customer wants to route

  calls by Home Location Codes (HLOC) and Location Codes (LOCs).

  Consider the following Home Location Codes.

  HLOC for system A = 329

  HLOC for system B = 429

  What LOC should be provisioned for system A?

  A. LOC for System A = 3

  B. LOC for System A = 49

  C. LOC for System A = 329

  D. LOC for System A = 429

  Correct Answer: D

• Question 22:

  Click the Exhibit button.

  

  Given a company's dialing plan shown in the exhibit, if a station user at the company in the New York City is attempting to place a call to Albany and the station dial AC1+661+7449, what will happen to the call?

  A. The call will terminate at the Boston location at extension 7449.

  B. The call will not completeand theuser will receive the interface treatment as defined in the Customer Data Block (CDB) for that customer.

  C. The call will terminate at the Albany location at extension 7449.

  D. Thecallwill terminate at the LDN of 518-267-7300 over Route 10

  Correct Answer: C

• Question 23:

  Click the Exhibit button.

  

  

  An employee at a company is placing a call to telephone number 214-774-3299. The employee, believing

  this is a toll call, dials 9-1-214-774-3299. However, this call is a local call.

  Access Code 1 = 9

  The Central Office utilizes a 7-digital dialing plan.

  Given the DMI indexes programmed into this Communication Server 1000 shown in the exhibit, which DMI

  would be used to modify the dialed digits to outpulse the correct digits to the Central Office?

  A. DMI Table 1

  B. DMI Table 2

  C. DMI Table 3

  D. DMI Table 4

  Correct Answer: B

• Question 24:

  Click the Exhibit button.

  

  A customer has deployed a Communication Server 1000 RIs. 7 x system at their site. You have been

  asked to swap two telephone sets shown in the print-outs.

  What win you ten me customer regarding this request?

  A. These two telephones cannot be swapped because they do have compatible

  B. These two telephones can be swapped because they are both assigned to TGAR 1.

  C. These two telephonescan beswapped because they both have the same VCEClass of service.

  D. These two telephones cannot be swapped because they are not in thesomeCall Pickup group.

  Correct Answer: A

• Question 25:

  A customer has just deployed a new Communication Server 1000 RIs. 7 x High Availability system. You

  have been instructed to configure the required virtual routes to comply with the company's dialing plan

  strategy.

  Which Feature Package must be enabled to allow virtual routes on the system?

  A. Package 147 ISDN Signaling Link

  B. Package 148 Advanced ISDN Network Services

  C. Package 145 integrated Services Digital Network

  D. Package 161 ISDN Supplementary Features

  Correct Answer: B

• Question 26:

  Click the Exhibit button.

  A customer has a Communication Server 1000RIs. 7 x system. Telephone users are required to use Basic

  Alternate Route Selection (BARS) to make toll calls.

  What Class of Service (CLS) adjustment must you make telephone in order to allow the system to use the

  telephone network class of service (NCOS) to determine call eligibility?

  A. change the CLS entrySRE to CTD

  B. change the CLS entrySRE to FR2

  C. change the CLS entrySRE to CUN

  D. change the CLS entry SRE to UNR

  Correct Answer: D

• Question 27:

  What new prompt is added to an IP set configuration to allow for assigning a set for Zone Based Doling?

  A. the ZONE prompt

  B. the NUMZONE prompt

  C. the DIALPLAN prompt

  D. the ZBO prompt

  Correct Answer: B

• Question 28:

  A customer is using Zone Based Dialing in their Networked Communication Server 1000 systems. Which prompt has been added to the telephone configuration overlays to allow IP telephones to be configured for this?

  A. the DIA1__PLAN prompt (Type Of dialing plan for DN/CLIDdisplay)

  B. the NZON prompt (Numbering Zone)

  C. the NUMZONE prompt (Number of the Numbering Zone)

  D. the NZDES prompt (NumberingZone Designator)

  Correct Answer: C

• Question 29:

  Click the Exhibit button. You are responsible for maintaining a small Communication Server 1000 RIs. 7 x SA system. The customer decided against using Basic Automatic Route Selection (BARS) for call routing. They are now reporting that the user of extension 2001 is blocked when attempting to dial local call using the COT access code.

  Based on the exhibit, what adjustments should be made to the system to allow the user of extension 2001 to dial local calls only by directly accessing the COT Route?

  A. Change the Class of Service of extension 2001 to Semi Restricted (SRE) and leave the TGAR setting of two (2) on the COT Route.

  B. Change the TGAR of extension2001 to zero and leave the Class of Service setting of Toll Denied (TLD) on extension 2001.

  C. Change the Class of Service of extension 2001 to Conditionally Unrestricted (CUN),leave theTGAR setting of two (2) on the COT Route.

  D. Change the TGAR of the COT Route to zero and change the Class of Service setting of extension 2001 to Conditionally Toll Denied (CTD)

  Correct Answer: D

• Question 30:

  You are using Element Manager to program a Route List Index (RLI). Which Electronic Switched Network (ESN) parameters must you define to be able to successfully program an RLI?

  A. Routing Control (PTCL)

  B. OptimalRoute (OPRT)

  C. Maximumnumber of route lists (MXRL)

  D. Minimum number of route lists (MNRL)

  Correct Answer: C