Microsoft 70-741 Online Practice Questions and Exam Preparation

Microsoft 70-741 Online Questions & Answers

• Question 271:

  HOTSPOT

  Note: This question is part of a series of questions that use the same scenario. For your convenience, the scenario is repeated in each question. Each question presents a different goal and answer choices, but the text of thescenario is exactly the same in each question in this series.

  

  You are a network administrator for a company named Contoso, Ltd. The network is configured as shown in the exhibit. (Click the Exhibit tab.)

  

  You install the Remote Access server role on Server2. Server2 has the following configured:

  1. Network address translation (NAT)

  2. The DHCP Server server role

  The Security Policy of Contoso states that only TCP ports 80 and 443 are allowed from the Internet to Server2.

  You identify the following requirements:

  1. Add 28 devices to subnet2 for a temporary project.

  2. Configure Server2 to accept VPN connections from the Internet.

  3. Ensure that devices on Subnet2 obtain TCP/IP settings from DHCP on Server2.

  

  You deploy a computer named ComputerB to subnet4. ComputerB has an IP address of 192.168.10.230 and a subnet mask of 255.255.255.240. What is the broadcast address for Subnet4? To answer, select the appropriate options in the answer area.

  Hot Area:

  

  

• Question 272:

  Is the following statement TRUE or FALSE?

  You can use SLB with a VLAN-based network for DIP VMs connected to a SDN Enabled Hyper-V Virtual Switch.

  A. FALSE
  B. TRUE
  B. TRUE

• Question 273:

  You have Hyper-V host named Server1. Serve1 has a network adapter that has virtual machine queue (VMQ) enabled. The network adapter connects at 10 Gbps and has an Ipv4 address.

  Server1 hosts a virtual machine named VM1. VM1 has a single network adapter and four processors.

  You need to distribute the network processing load across the VM1 processors.

  What should you do?

  A. From Device Manager on Server1, configure TCP Checksum Offload (IPv4).
  B. From Windows PowerShell on VM1, run the Enable-NetAdapterRSS cmdlet.
  C. From Windows PowerShell on Server1, run the Enable-NetAdapterPacketDirect cmdlet.
  D. From Windows PowerShell on VM1, run the Enable-NetAdapterPacketDirect cmdlet.
  B. From Windows PowerShell on VM1, run the Enable-NetAdapterRSS cmdlet.

• Question 274:

  HOTSPOT

  You have a main office and three branch offices that connect by using a WAN link.

  You have servers that run Windows Server 2016 and client computers that run Windows 10 Enterprise.

  You plan to configure BranchCache so that clients in the branch office use a server on their local network to retrieve cached content from the servers in the main office.

  You plan to use Active Directory for the client computers to locate the hosted cache servers.

  You need to configure the client computers to automatically locate a hosted cache server from Active Directory.

  Which two settings should you configure? To answer, select the appropriate settings in the answer area.

  NOTE: Each correct selection is worth one point. Hot Area:

  

  

• Question 275:

  Which of the following is NOT a recognized private IP address ranges are specified by Internet Request for Comments (RFC) 1918?

  A. 10.0.0.0 - 10.255.255.255
  B. 192.168.0.0 - 192.168.255.255
  C. 172.16.0.0 - 172.31.255.255
  D. 128.24.0.0 - 128.24.255.255
  D. 128.24.0.0 - 128.24.255.255

• Question 276:

  Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while

  others might not have a correct solution.

  After you answer a question in this sections, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.

  You are a network administrator for a company named Contoso, Ltd. The network is configured as shown in the exhibit.

  

  You install the Remote Access server role on Server2.

  Server2 has the following configured:

  1.

  Network address translation (NAT)

  2.

  The DHCP Server server role

  The Security Policy of Contoso states that only TCP ports 80 and 443 are allowed from the Internet to Server2.

  You identify the following requirements:

  1.

  Add 28 devices to Subnet2 for a temporary project.

  2.

  Configure Server2 to accept VPN connections from the Internet.

  3.

  Ensure that devices on Subnet2 obtain TCP/IP settings from DHCP on Server2.

  

  Which VPN protocol should you configure on Server2?

  A. L2TP
  B. IKEv2
  C. PPTP
  D. SSTP
  C. PPTP

• Question 277:

  Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while

  others might not have a correct solution.

  After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.

  You have a Hyper-V host named Server 1. The network adapters on Server1 have single root I/O virtualization (SR-IOV) enabled.

  Server1 hosts a virtual machine named VM1 that runs Windows Server 2016.

  You need to identify whether SR-IOV is used by VM1.

  Solution: You sign in to VM1. You view the properties of the network connections.

  Does this meet the goal?

  A. Yes
  B. No
  B. No

• Question 278:

  DRAG DROP

  You manage a server named Server1 that runs Windows Server 2016 and has The DHCP Server role installed.

  The DHCP Iease duration of all the DHCP scopes is three days.

  You plan to provide DHCP services to mobile clients issued by your company to employees. All the mobile clients have the same Vendor Class Identifier.

  You need to ensure that the mobile clients will haw a lease duration of eight hours.

  Which three action should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange then in the correct order.

  Select and Place:

  

  

• Question 279:

  You have two Hyper-V hosts named Server1 and Server2 that run Windows Server 2016. Server1 and Server2 are connected to the same network.

  On Server1 and Server2, you create an external network switch named Switch1.

  You have the virtual machine shown in the following table.

  

  All three virtual machines are connected to Switch1.

  You need to prevent applications in VM3 from being able to capture network traffic from VM1 or VM2. The solution must ensure that VM1 retains network connectivity.

  What should you do?

  A. Configure network virtualization for VM1 and VM2.
  B. Modify the subnet mask of VM1 and VM2.
  C. On Server2, configure the VLAN ID setting of Switch1.
  D. On Server2, create an external switch and connect VM3 to the switch.
  A. Configure network virtualization for VM1 and VM2.

• Question 280:

  You are implementing a secure network. The network contains a DHCP server named Server1 that runs Windows Server 2016.

  You create a DHCP allow filter that contains all of the computers on the network that are authorized to receive IP addresses.

  You discover that unauthorized computers can obtain an IP address from Server1.

  You need to ensure that only authorized computers can receive an IP address from Server1.

  Solution: You run the following command.

  Add-DHCPServer4Filter -ComputerName Server1 -MacAddress -List Deny

  Does this meet the goal?

  A. Yes
  B. No
  B. No