Microsoft 70-741 Online Practice Questions and Exam Preparation

Microsoft 70-741 Online Questions & Answers

• Question 11:

  You have a DHCP server named Server1 that runs Windows Server 2016.

  You have a single IP subnet.

  Server1 has an IPv4 scope named Scope1. Scope1 has an IP address range of 10.0.1.10 to 10.0.1.200 and a length of 24 bits.

  You need to create a second logical IP network on the subnet. The subnet will use an IP address range of 10.0.2.10 to 10.0.2.200 and a length of 24 bits.

  What should you do?

  A. Create a second scope, and then create a superscope.
  B. Create a superscope, and then configure an exclusion range in Scope1.
  C. Create a new scope, and then modify the IPv4 bindings.
  D. Create a second scope, and then run the DHCP Split-Scope Configuration Wizard.
  A. Create a second scope, and then create a superscope.

• Question 12:

  Your Network contains an Active Directory domain. The domain contains two domain controllers named DC1 and DC2.

  You plan to install the DHCP Server role on DC1 and DC2 and configure DC1 and DC2 to manage PTR records on behalf of domain-joined computers. You need to ensure that the domain controllers will be able to keep the PTR records up to

  date, regardless of which domain controller created the records. What should you do?

  A. On DC1 and DC2. create a DHCP policy.
  B. Add the domain-joined computer accounts to the IPAM DHCP Reservations Administration role group.
  C. Add the domain-joined computer accounts to the IPAM DHCP Administrator role group.
  D. On DC1 and DC2 configure the DNS dynamic updates registration credentials.
  A. On DC1 and DC2. create a DHCP policy.

• Question 13:

  You have a DHCP server named Server1.

  Server1 has an IPv4 scope that serves 75 client computers that run Windows 10.

  When you review the address leases in the DHCP console, you discover several leases for devices that you do not recognize.

  You need to ensure that only the 75 Windows 10 computers can obtain a lease from the scope.

  Which of following action should you do?

  A. Create and enable a DHCP filter.
  B. Create a DHCP policy for the scope.
  C. Run the Add-DhcpServerv4OptionDefinition cmdlet.
  D. Run the Add-DhcpServerv4ExclusionRange cmdlet.
  D. Run the Add-DhcpServerv4ExclusionRange cmdlet.

• Question 14:

  Note: This question is part of a series of questions that use the same scenario. For your convenience, the scenario is repeated in each question. Each question presents a different goal and answer choices, but the text of the scenario is

  exactly the same in each question in this series.

  Your network contains an Active Directory domain named contoso.com. The functional level of the domain is Windows Server 2012.

  The network uses an address space of 192.168.0.0/16 and contains multiple subnets.

  The network is not connected to the Internet.

  The domain contains three servers configured as shown in the following table.

  

  Client computers obtain TCP/IP settings from Server3.

  You add a second network adapter to Server2. You connect the new network adapter to the Internet. You install the Routing role service on Server2.

  Server1 has four DNS zones configured as shown in the following table.

  

  You need to ensure that when a computer is removed from the network, the associated records are deleted automatically after 15 days. Which two actions should you perform? Each correct answer presents part of the solution.

  A. Create a scheduled task that runs the Remove-Computer cmdlet.
  B. Modify the Zone Aging/Scavenging Properties of the zone.
  C. Modify the Time to live (TTL) value of the start of authority (SOA) record.
  D. Set the Scavenging period of Server1.
  E. Modify the Expires after value of the start of authority (SOA) record.
  B. Modify the Zone Aging/Scavenging Properties of the zone.
  D. Set the Scavenging period of Server1.

• Question 15:

  You have a server named Server1 that runs Windows Server 2016. Server1 is located on the perimeter network, and only inbound TCP port 443 is allowed to connect Server1 from the Internet.

  You install the Remote Access server role on Server1.

  You need to configure Server1 to accept VPN connections over port 443.

  Which VPN protocol should you use?

  A. PPTP
  B. SSTP
  C. L2TP
  D. IKEv2
  B. SSTP

• Question 16:

  Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while

  others might not have a correct solution.

  After you answer a question in this sections, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.

  You have an IP Address Management (IPAM) server named IPAM1 that runs Windows Server 2016. IPAM1 manages all of the DHCP servers on your network.

  You are troubleshooting an issue for a client that fails to receive an IP address from DHCP.

  You need to ensure that from IPAM1, you can view all of the event data for the DHCP leases from the last 24 hours.

  Solution: From Task Scheduler, you run the Microsoft\Windows\IPAM\Audit task.

  Does this meet the goal?

  A. Yes
  B. No
  B. No

• Question 17:

  You have a server named Host1 that runs Windows Server 2016.

  You configure Host1 as a virtualization host and create 20 new virtual machines on Host1.

  You need to ensure that all of the virtual machines can connect to the Internet through Host1.

  Which three actions should you perform? Each correct answer presents part of the solution.

  A. On a virtual machine, install the Remote Access server role.
  B. From the properties of each virtual machine, enable virtual LAN identification.
  C. From the properties of each virtual machine, connect to the virtual machine switch.
  D. On Host1, configure the network address translation (NAT) network.
  E. On Host1, create an internal virtual machine switch and specify an IP address for the switch.
  C. From the properties of each virtual machine, connect to the virtual machine switch.
  D. On Host1, configure the network address translation (NAT) network.
  E. On Host1, create an internal virtual machine switch and specify an IP address for the switch.

• Question 18:

  HOTSPOT

  Your network contains an Active Directory domain named contoso.com. The domain contains a DNS server named Server1. Server1 is configured as shown in the following exhibit.

  

  Server1 has a DNS zone named contoso.com that has the following configurations:

  1. Dynamic updates: Secure only

  2. Scavenge stale resource records: Enabled

  3. No-refresh interval: 3 days

  4. Refresh interval: 7 days

  On March 2, 2019, HostA, HostB, and HostC are removed from the network.

  The contoso.com zone includes the records shown in the following table.

  

  For each of the following statements, select Yes if the statement is true. Otherwise, select No.

  NOTE: Each correct selection is worth one point.

  Hot Area:

  

  

• Question 19:

  DRAG DROP

  You have a remote access server named Server1 that runs Windows Server 2016. Server1 has DirectAccess enabled.

  A firewall connects Server1 to the Internet.

  You need to configure the firewall to ensure that DirectAccess clients can connect to Server1 by using Teredo, 6to4, and IP-HTTPS.

  Which inbound port should be open on the firewall for each transition technology?

  To answer, drag the appropriate ports to the correct transition technologies. Each port may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.

  NOTE: Each correct selection is worth one point.

  Select and Place:

  

  

• Question 20:

  HOTSPOT

  Your network contains an Active Directory forest named contoso.com. The forest contains a Network Policy Server (NPS) server named Radius1 that runs Windows Server 2016.

  You need to create a new connection request policy that will allow only Secure Socket Tunneling Protocol (SSTP) connections. Radius1 will manage all authentication requests.

  Which NAS port type and which authentication method should you configure in the connection request policy? To answer, select the appropriate options in the answer area.

  NOTE: Each correct selection is worth one point.

  Hot Area: