Microsoft 70-741 Online Practice Questions and Exam Preparation

Microsoft 70-741 Online Questions & Answers

• Question 231:

  HOTSPOT

  Note: This question is part of a series of questions that use the same scenario. For your convenience, the scenario is repeated in each question. Each question presents a different goal and answer choices, but the text of thescenario is exactly the same in each question in this series.

  You are a network administrator for a company named Contoso, Ltd. The network is configured as shown in the exhibit. (Click the Exhibit tab.)

  

  You install the Remote Access server role on Server2. Server2 has the following configured:

  1. Network address translation (NAT)

  2. The DHCP Server server role

  The Security Policy of Contoso states that only TCP ports 80 and 443 are allowed from the Internet to Server2.

  You identify the following requirements:

  1. Add 28 devices to Subnet2 for a temporary project.

  2. Configure Server2 to accept VPN connections from the Internet.

  3. Ensure that devices on Subnet2 obtain TCP/IP settings from DHCP on Server2.

  

  You need to identify which subnet mask you must use for subnet2. The solution must minimize the number of available IP addresses on Subnet2. What subnet mask should you identify? To answer, select the appropriate options in the answer area.

  Hot Area:

  

  

• Question 232:

  Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while

  others might not have a correct solution.

  After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.

  You have a Hyper-V host named Server 1. The network adapters on Server1 have single root I/O virtualization (SR-IOV) enabled.

  Server1 hosts a virtual machine named VM1 that runs Windows Server 2016.

  You need to identify whether SR-IOV is used by VM1.

  Solution: You sign in to VM1. You run the Get-NetAdapterSriov cmdlet.

  Does this meet the goal?

  A. Yes
  B. No
  A. Yes

• Question 233:

  Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while

  others might not have a correct solution.

  After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.

  Your network contains an Active Directory domain named contoso.com. The domain contains a DHCP server named Server2 than runs Windows Server 2016.

  Users report that their client computers fail to obtain an IP address.

  You open the DHCP console as shown in the Exhibit. (Click the Exhibit button.)

  

  Scope1 has an address range of 172.16.0.10 to 172.16.0.100 and a prefix length of 23 bits.

  You need to ensure that all of the client computers on the network can obtain an IP address from Server2.

  Solution: You run the Repair-DhcpServerv4IPRecord cmdlet.

  Does this meet the goal?

  A. Yes
  B. No
  B. No

• Question 234:

  You have multiple servers that run Windows Server 2016.

  You need to install the DNS Server server role on one of the servers.

  What should you run?

  A. dism.exe
  B. dns.exe
  C. dnscmd.exe
  D. netsh.exe
  E. Set-DhcpServerDatabase
  F. Set-DhcpServerv4DnsSetting
  G. Set-DhcpServerv6DnsSetting
  H. Set-DNSServerSetting
  A. dism.exe

• Question 235:

  Note: This question is part of a series of questions that use the same or similar answer choices. An answer choice may be correct for more than one question in the series. Each question is independent of the other questions in this series.

  Information and details provided in a question apply only to that question.

  You have a DHCP server named Server1 that has three network cards. Each network card is configured to use a static IP address. Each network card connects to a different network segment.

  Server1 has an IPv4 scope named Scope1.

  You need to ensure that Server1 only uses one network card when leasing IP addresses in Scope1.

  What should you do?

  A. From the properties of Scope1, modify the Conflict detection attempts setting.
  B. From the properties of Scope1, configure Name Protection.
  C. From the properties of IPv4, configure the bindings.
  D. From IPv4, create a new filter.
  E. From the properties of Scope1, create an exclusion range.
  F. From IPv4, run the DHCP Policy Configuration Wizard.
  G. From Control Panel, modify the properties of Ethernet.
  H. From Scope1, create a reservation.
  C. From the properties of IPv4, configure the bindings.

• Question 236:

  Your network contains multiple wireless access points (WAPs) that use WPA2-Personal authentication. The network contains an enterprise root certification authority (CA).

  The security administrator at your company plans to implement WPA2-Enterprise authentication on the WAPs.

  To support the authentication change, you deploy a server that has Network Policy Server (NPS) installed.

  You need to configure NPS to authenticate the wireless clients.

  What should you do on the NPS server?

  A. Add RADIUS clients and configure network policies.
  B. Create a remote RADIUS server group and configure connection request policies.
  C. Create a remote RADIUS server group and install a server certificate.
  D. Add RADIUS clients and configure connection request policies.
  A. Add RADIUS clients and configure network policies.

• Question 237:

  Complete the missing term:

  The SLB ______ processes inbound network traffic and maps VIPs to DIPs, then forwards the traffic to the correct DIP.

  A. Host Agent
  B. Northbound API
  C. SCVMM
  D. MUX
  D. MUX

• Question 238:

  Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution. Determine whether the solution meets the stated goals. Refer to exhibit:

  

  Server1 has two virtual machines named VM1 and VM that run Windows Server 2016. VM1 connects to Private VM2 has two network adapters.

  You need to ensure that VM1 connects to the corporate network by using NAT.

  Solution: You connect VM1 to Internal1. You run the New-NetNatIpAddress and the New-NetNat cmdlets on Server1. You configure VM1 to use VM2 as the default gateway.

  Does this meet the goal?

  A. Yes
  B. No
  A. Yes

• Question 239:

  Your network contains an Active Directory forest named contoso.com.

  The forest contains five domains. You manage DNS for the contoso.com domain only.

  You are not responsible for managing DNS for the child domains.

  The DNS servers in a child domain named research.contoso.com are reconfigured often.

  You need to ensure that clients in contoso.com can resolve addresses in research.contoso.com. The solution must minimize zone replication traffic.

  What should you do?

  A. Create a primary zone for research.contoso.com on the DNS servers of contoso.com
  B. Create a secondary zone for research.contoso.com on the DNS servers of contoso.com
  C. Create a stub zone for research.contoso.com on the DNS servers of contoso.com
  D. Create a delegation for research.contoso.com
  D. Create a delegation for research.contoso.com

• Question 240:

  HOTSPOT

  Your network contains an Active Directory domain named contoso.com. The domain contains four servers named Server1, Server2, Server3, and Server4 than run Windows Server 2016.

  Server1 has IP Address Management (IPAM) installed. Server2, Server3, and Server4 have the DHCP Server role installed. IPAM manages Server2, Server3, and Server4.

  A domain user named User1 is a member of the groups shown in the following table.

  

  Which actions can User1 perform? To answer, select the appropriate options in the answer area.

  Hot Area: