Microsoft 70-410 Online Practice Questions and Exam Preparation

Microsoft 70-410 Online Questions & Answers

• Question 311:

  Your network contains an Active Directory domain named contoso.com. The domain contains two domain controllers. The domain controllers are configured as shown in the following table.

  

  In the perimeter network, you install a new server named Server1 that runs Windows Server 2012 R2. Server1 is in a workgroup.

  You need to perform an offline domain join of Server1 to the contoso.com domain.

  What should you do first?

  A. Transfer the PDC emulator role to Dc1.
  B. Run the djoin.exe command.
  C. Run the dsadd.exe command.
  D. Transfer the infrastructure master role to DC1.
  B. Run the djoin.exe command.

  ---

  Use djoin for offline join in the perimeter network Incorrect Answers:

  A: Creates a new Active Directory computer.

  C: Adds specific types of objects to the directory.

  D: Add the local computer to a domain or workgroup.

• Question 312:

  Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that runs Windows Server 2012 R2 and has the Web Server (IIS) server role installed.

  Server1 has a web site named Web1. Web1 is configured to use digest authentication.

  You need to ensure that a user named User1 can access Web1.

  What should you do from Active Directory Users and Computers?

  A. From the properties of User1, select Store password using reversible encryption.
  B. From the properties of User1, select Use Kerberos DES encryption types for this account.
  C. From the properties of Server1, select Trust this computer for delegation to any service (Kerberos only).
  D. From the properties of Server1, assign the Allowed to Authenticate permission to User1.
  A. From the properties of User1, select Store password using reversible encryption.

  ---

  Challenge Handshake Authentication Protocol (CHAP) is a basic level of iSCSI security that is used to authenticate the peer of a connection and is based upon the peers sharing a secret: that secret being a password. To make sure that User1 can connect to the server, you should use Active Directory Users and Computers to store that password.

• Question 313:

  Your network contains an Active Directory domain named contoso.com. The domain contains a print server named Print1 that runs Windows Server 2012 R2.

  Print1 has 50 shared printers. Each printer is listed in Active Directory. From Active Directory Users and Computers, you browse to Print1 and you discover that the 50 printers are not visible. You need to ensure that you can view the printer objects in Active Directory Users and Computers.

  Which option should you select?To answer, select the appropriate option in the answer area.

  Hot Area:

  

  

  ---

  In the Active Directory Users and Computers snap-in you should navigate to the Users, Contacts, Groups, and Computers as containers tab if you want to view printer objects that are shared.

  References:

  Exam Ref 70-410: Installing and Configuring Windows Server 2012 R2, Chapter 5: Active Directory Administration, Lesson 1: Administering Active Directory objects using ADAC, p.195

• Question 314:

  You work as an administrator at Contoso.com. The Contoso.com network consists of a single domain named Contoso.com. All servers on the Contoso.com network have Windows Server 2012 R2 installed.

  Contoso.com has a server, named ENSUREPASS-SR07, which has the ADDS, DHCP, and DNS server roles installed. Contoso.com also has a server, named ENSUREPASS-SR08, which has the DHCP, and Remote Access server roles installed. You have configured a server, which has the File and Storage Services server role installed, to automatically acquire an IP address. The server is named ENSUREPASSSR09.

  You then create reservation on ENSUREPASS-SR07, and a filter on ENSUREPASS-SR08.

  Which of the following is a reason for this configuration?

  A. It allows ENSUREPASS-SR09 to acquire a constant IP address from ENSUREPASS-SR08 only.
  B. It configures ENSUREPASS-SR09 with a static IP address.
  C. It allows ENSUREPASS-SR09 to acquire a constant IP address from ENSUREPASS-SR07 and ENSUREPASSSR08.
  D. It allows ENSUREPASS-SR09 to acquire a constant IP address from ENSUREPASS-SR07 only.
  D. It allows ENSUREPASS-SR09 to acquire a constant IP address from ENSUREPASS-SR07 only.

  ---

  To configure the Deny filter In the DHCP console tree of DHCP Server 1, under IPv4, click Filters, right-click Deny under Filters, and then click New Filter. In the New Deny Filter dialog box, in MAC Address, enter a six hexadecimal number representing the MAC or physical address of DHCP Client 2, click Add, and then click Close. Under Filters right-click the Deny node, and then click the Enable pop-up menu item.

• Question 315:

  You work as an administrator at Contoso.com. The Contoso.com network consists of a single domain named Contoso.com. All servers on the Contoso.com network have Windows Server 2012 installed.

  Contoso.com has a server, named ENSUREPASS-SR07, which has the AD DS, DHCP, and DNS server roles installed. Contoso.com also has a server, named ENSUREPASS-SR08, which has the DHCP, and Remote Access server roles installed. You have configured a server, which has the File and Storage Services server role installed, to automatically acquire an IP address.

  The server is named ENSUREPASS-SR09. You then create a filter on ENSUREPASS-SR07.

  Which of the following is a reason for this configuration?

  A. To make sure that ENSUREPASS-SR07 issues ENSUREPASS-SR09 an IP address.
  B. To make sure that ENSUREPASS-SR07 does not issue ENSUREPASS-SR09 an IP address.
  C. To make sure that ENSUREPASS-SR09 acquires a constant IP address from ENSUREPASS-SR08 only.
  D. To make sure that ENSUREPASS-SR09 is configured with a static IP address.
  B. To make sure that ENSUREPASS-SR07 does not issue ENSUREPASS-SR09 an IP address.

• Question 316:

  You have a network printer connected to print server. You need to be able to print if print server goes down.

  What should you configure?

  A. branch office direct printing
  B. printer pooling
  C. spooling
  D. Print forwarding
  A. branch office direct printing

  ---

  Branch Office Direct Printing can reduce Wide Area Network (WAN) usage by printing directly to a print device instead of a server print queue. This feature can be enabled or disabled on a per printer basis and is transparent to the user. It is

  enabled by an administrator using the Print Management Console or Windows PowerShell on the server.

  The printer information is cached in the branch office, so that if the print server is unavailable for some reason (for example if the WAN link to the data center is down), then it is still possible for the user to print.

  Branch Office Direct Printing requires the following operating systems:

  Windows Server 2012

  Windows 8

• Question 317:

  Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1. Server1 runs Windows Server 2012 R2.

  You need to create a 3-TB virtual hard disk (VHD) on Server1.

  Which tool should you use?

  A. New-StoragePool
  B. Diskpart
  C. File Server Resource Manager (FSRM)
  D. New-StorageSubsytemVirtualDisk
  B. Diskpart

  ---

  You can create a VHD from either the Disk Management snap-in or the command line (diskpart). From the DiskPart command-line tool at an elevated command prompt, run the create vdisk command and specify the file (to name the file) and maximum (to set the maximum size in megabytes) parameters. The following code demonstrates how to create a VHD file at C:\vdisks\disk1.vdh with a maximum file size of 16 GB (or 16,000 MB). DiskPart Microsoft DiskPart version 6.1.7100 Copyright (C) 1999-2008 Microsoft Corporation. On computer: WIN7 DISKPART> create vdisk file="C:\vdisks\disk1.vhd" maximum=16000

• Question 318:

  Your network contains an Active Directory forest named contoso.com. All domain controllers currently run Windows Server 2008 R2 Service Pack1 (SP1).

  You plan to install a new domain controller named DC4 that runs Windows Server 2012 R2.

  The new domain controller will have the following configurations:

  Schema master

  

  Global catalog server

  

  DNS Server server role

  

  Active Directory Certificate Services server role

  

  You need to identify which configuration can be fulfilled by using the Active Directory Domain Services Configuration Wizard. Which two configurations should you identify? (each correct answer presents part of the solution. Choose two.)

  A. Transfer the schema master.
  B. Install the Active Directory Certificate Services role.
  C. Install the DNS Server role.
  D. Enable the global catalog server.
  C. Install the DNS Server role.
  D. Enable the global catalog server.

  ---

  Reference: https://technet.microsoft.com/en-us/windows-server-docs/identity/ad-ds/deploy/ad-ds-installation-and-removal-wizard-page-descriptions

• Question 319:

  A network technician installs Windows Server 2012 R2 Standard on a server named Server1.

  A corporate policy states that all servers must run Windows Server 2012 R2 Enterprise.

  You need to ensure that Server1 complies with the corporate policy.

  You want to achieve this goal by using the minimum amount of administrative effort.

  What should you perform?

  A. a clean installation of Windows Server 2012 R2
  B. an upgrade installation of Windows Server 2012 R2
  C. online servicing by using Dism
  D. offline servicing by using Dism
  C. online servicing by using Dism

  ---

  DISM /online /Set-Edition: ServerEnterprise/ProductKey:489J6-VHDMP-X63PK-3K798-CPX3YWindows Server 2008 R2/2012 contains a command-line utility called DISM (Deployment Image Servicing and Management tool). This tool has

  many features, but one of those features is the ability to upgrade the edition of Windows in use. Note that this process is for upgrades only and is irreversible. You cannot set a Windows image to a lower edition. The lowest edition will not

  appear when you run the /Get- TargetEditions option.

  If the server is running an evaluation versionof Windows Server 2012 R2 Standard or Windows Server 2012 R2 Datacenter, you can convert it to a retail version as follows:

  If the server is a domain controller, you cannot convert it to a retail version. In this case, install an additional domain controller on a server that runs a retail version and remove AD DS from the domain controller that runs on the evaluation

  version. From an elevated command prompt, determine the current edition name with the command DISM /online /Get-CurrentEdition. Make note of the edition ID, an abbreviated form of the edition name. Then run DISM /online /SetEdition: /ProductKey: XXXXXXXXXX-XXXXX-XXXXXXXXXX/AcceptEula, providing the edition ID and a retail product key.

  The server will restart twice.

• Question 320:

  You work as an administrator at Contoso.com. The Contoso.com network consists of a single domain named Contoso.com. All servers on the Contoso.com network have Windows Server 2008 R2 installed.

  Most of the Contoso.com servers have 64 ?bit CPU's installed, while the rest have 32 ?bit CPU's installed. You are informed that Contoso.com wants to deploy Windows Server 2012 R2 on all their servers.

  You need to make recommendations to ensure that this is possible.

  Which of the following would you recommend?

  A. You should inform Contoso.com that the deployment can proceed without any changes.
  B. You should inform Contoso.com that the servers with 32 bit CPU's must be upgraded to include 64 bit CPU's for the deployment to proceed.
  C. You should inform Contoso.com that the servers with 64 bit CPU's must be upgraded to include 32 bit CPU's for the deployment to proceed.
  D. You should inform Contoso.com that the deployment is not in any way possible.
  B. You should inform Contoso.com that the servers with 32 bit CPU's must be upgraded to include 64 bit CPU's for the deployment to proceed.

  ---

  Windows Server 2012 is a 64-bit only operating system. Minimum: 1.4 GHz 64-bit processor