Microsoft 70-410 Online Practice Questions and Exam Preparation

Microsoft 70-410 Online Questions & Answers

• Question 301:

  You work as an administrator at Contoso.com. The Contoso.com network consists of a single domain named Contoso.com. All servers on the Contoso.com network have Windows Server 2012 R2 installed. You have been instructed to make sure that a server, named ENSUREPASS-SR07, is configured to be managed remotely from ENSUREPASS-SR01 using Server Manager.

  Which of the following is not a valid option to take? (Choose all that apply.)

  A. You could access the server manager on ENSUREPASS-SR07.
  B. You could access the server manager on ENSUREPASS-SR13.
  C. You could run the %windir%\system32\Configure-SMRemoting.exe from an elevated command prompt on ENSUREPASS-SR13.
  D. You could run the Configure-SMRemoting.exe ?enable cmdlet on ENSUREPASS-SR07.
  B. You could access the server manager on ENSUREPASS-SR13.
  C. You could run the %windir%\system32\Configure-SMRemoting.exe from an elevated command prompt on ENSUREPASS-SR13.

• Question 302:

  Your network contains two Hyper-V hosts named Host1 and Host2. Host1 contains a virtual machine named VM1. Host2 contains a virtual machine named VM2. VM1 and VM2 run Windows Server 2012 R2.

  You install the Network Load Balancing feature on VM1 and VM2.

  You need to ensure that the virtual machines are configured to support Network Load Balancing (NLB).

  Which virtual machine settings should you configure on VM1 and VM2?

  A. DHCP guard
  B. MAC address
  C. Router guard
  D. Port mirroring
  B. MAC address

  ---

  When MAC addresses are not assigned to virtual machines, it could cause network problems.

  References:

  Training Guide: Installing and Configuring Windows Server 2012 R2: Chapter 7: Hyper-V virtualization, Lesson 1: Deploying and configuring Hyper-V hosts, p. 313-319.

  http://blogs.msdn.com/b/clustering/archive/2010/07/01/10033544.aspx

• Question 303:

  Your network contains an Active Directory domain named contoso.com. The domain contains a member server named Server1. Server1 runs Windows Server 2012 R2 and has the File and Storage Services server role installed.

  On Server1, you create a share named Documents.

  You need to ensure that users can recover files that they accidently delete from Documents.

  What should you do?

  A. Enable shadow copies by using Computer Management.
  B. Create a storage pool that contains a two-way mirrored volume by using Server Manager.
  C. Modify the Startup type of the Volume Shadow Copy Service (VSS) by using the Services console.
  D. Create a recovery partition by using Windows Assessment and Deployment Kit (Windows ADK).
  A. Enable shadow copies by using Computer Management.

  ---

  If you enable Shadow Copies of Shared Folders on a volume using the default values, a task will be scheduled to create shadow copies at 7:00 A.M of next business day. The default storage area will be on the same volume, and its size will

  be 10 percent of the available space. You can only enable Shadow Copies of Shared Folders on a per-volume basishat is, you cannot select specific shared folders and files on a volume to be copied or not copied.

  To enable and configure Shadow Copies of Shared Folders:

  Click Start, point to Administrative Tools, and then click Computer Management.

  In the console tree, right-click Shared Folders, click All Tasks, and then click Configure Shadow Copies.

  In Select a volume, click the volume that you want to enable Shadow Copies of Shared Folders for, and then click Enable.

  You will see an alert that Windows will create a shadow copy now with the current settings and that the settings might not be appropriate for servers with high I/O loads. Click Yes if you want to continue or No if you want to select a different

  volume or settings.

  To make changes to the default schedule and storage area, click Settings.

  Shadow copies - a feature that provides point-in-time copies of files stored on file shares on file servers. Shadow Copies of Shared Folders allows users to view and access shadow copies, which are shared files and folders as they existed at

  different points of time in the past. By accessing previous versions of files and folders, users can compare versions of a file while working and recover files that were accidentally deleted or overwritten.

  References: Training Guide: Installing and Configuring Windows Server 2012 R2, Chapter 7: Hyper-V virtualization, Lesson 1: Deploying and configuring Hyper-V- hosts, p. 302

• Question 304:

  Your network contains 10 subnets. Each subnet contains 10 servers that run Windows Server 2012 R2.

  You plan to assign IPv6 addresses to all of the servers. The solution must ensure that the servers can connect to other servers in remote subnets. The IPv6 addresses will not be routed on the Internet.

  You need to identify a valid prefix to use for the IPv6 addresses.

  Which prefix should you identify?

  A. Fd00::
  B. 2002:
  C. Fec0::
  D. ::1
  C. Fec0::

  ---

  References: https://4sysops.com/archives/ipv6-tutorial-part-6-site-local-addresses-and-link-local-addresses/

• Question 305:

  You have a server named Server1 that runs Windows Server 2012 R2. Server1 has the Hyper-V server role installed.

  An iSCSI SAN is available on the network.

  Server1 hosts four virtual machines named VM1, VM2, VM3, and VM4.

  You create a LUN on the SAN to host the virtual hard drive files for the virtual machines.

  You need to create a 3-TB virtual hard disk for VM1 on the LUN. The solution must prevent VM1 from being paused if the LUN runs out of disk space.

  Which type of virtual hard disk should you create on the LUN?

  A. Dynamically expanding VHDX
  B. Fixed-size VHDX
  C. Fixed-size VHD
  D. Dynamically expanding VHD
  B. Fixed-size VHDX

  ---

  The virtual disk needs to be a VHDX file since it is going to be over 2TB in size and it must be fixed-size so that the space is already taken on the server (that way the server does not run out of space as the volume grows) even if the actual virtual disk does not yet hold that amount of data.

• Question 306:

  Your network contains an Active Directory domain named adatum.com. The domain contains several thousand member servers that run Windows Server 2012 R2. All of the computer accounts for the member servers are in an organizational

  unit (OU) named ServersAccounts.

  Servers are restarted only occasionally.

  You need to identify which servers have been offline for more than 30 days.

  What should you do?

  A. Run dsquery computer and specify the -stalepwd parameter.
  B. Run Get-ADComputer and specify the lastLogonTimestamp parameter.
  C. Run Get-ADComputer and specify the lastLogon property.
  D. Run dsquery server and specify the -o parameter
  A. Run dsquery computer and specify the -stalepwd parameter.

  ---

  References: https://docs.microsoft.com/en-us/previous-versions/windows/it-pro/windows-server-2008-R2-and-2008/cc730720(v=ws.10)

• Question 307:

  Your network contains an Active Directory domain named contoso.com. The domain contains two servers named Server1 and Server2 that run Windows Server 2012 R2.

  From Server2, you attempt to connect to Server1 by using Computer Management and you receive the following error message: "Computer\ \Server1 cannot be found. The network path was not found."

  From Server1, you successfully connect to Server2 by using Server Manager.

  You need to ensure that you can manage Server1 remotely from Server2 by using Computer Management.

  What should you configure?

  To answer, select the appropriate option in the answer area.

  Hot Area:

  

  

• Question 308:

  Your network contains an Active Directory domain named contoso.com.

  Your company hires 500 temporary employees for the summer.

  The human resources department gives you a Microsoft Excel document that contains a list of the temporary employees.

  You need to automate the creation of user accounts for the 500 temporary employees.

  Which tool should you use?

  A. ADSI Edit
  B. The csvde.exe command
  C. Active Directory Users and Computers
  D. The Add-Member cmdlet
  B. The csvde.exe command

  ---

  Csvde.exe is the best option to add multiple users. As you just need to export the excel spreadsheet as a csv file and make sure the parameters are correct.

  You can use Csvde to import and export Active Directory data that uses the comma-separated value format.

  Use a spreadsheet program such as Microsoft Excel to open this .csv file and view the header and value information.

  The CSVDE is a command-line utility that can create new AD DS objects by importing information from a comma-separated value (.csv) file. This would be the least amount of administrative effort in this case especially considering that these

  would be temporary employees.

• Question 309:

  You work as an administrator at Contoso.com. The Contoso.com network consists of a single domain named Contoso.com.

  Contoso.com has a Windows Server 2012 R2 domain controller, named ENSUREPASS-DC01, which has the Domain Naming master and the Schema master roles installed. Contoso.com also has a Windows Server 2008 R2 domain

  controller, named ENSUREPASS-DC02, which has the PDC Emulator, RID master, and Infrastructure master roles installed.

  You have deployed a new Windows Server 2012 server, which belongs to a workgroup, in Contoso.com's perimeter network.

  You then executed the djoin.exe command.

  Which of the following is the purpose of the djoin.exe command?

  A. It sets up a computer account in a domain and requests an offline domain join when a computer restarts.
  B. It sets up a user account in a domain and requests an online domain join when a computer restarts.
  C. It sets up a computer account in a domain and requests an offline domain join immediately.
  D. It sets up a computer account in a domain and requests an online domain join immediately.
  A. It sets up a computer account in a domain and requests an offline domain join when a computer restarts.

• Question 310:

  You have a server that runs Windows Server 2012 R2.

  You need to create a volume that will remain online if two disks in the volume fail.

  The solution must minimize the number of disks used to create the volume.

  Which three actions should you perform in sequence? (Choose three.)

  A. Add five physical disks
  B. Create a storage space and set the disk allocation of one of the disks to "Hot Spare"
  C. Create a virtual disk
  D. Create a storage space by using the default disk allocation
  E. Add three physical disks
  A. Add five physical disks
  C. Create a virtual disk
  D. Create a storage space by using the default disk allocation

  ---

  A storage space with three-way mirroring can tolerate two disk failures but requires a minimum of five disks.

  References: http://technet.microsoft.com/en-us/library/hh831739.aspx http://technet.microsoft.com/en-us/library/jj822938.aspx http://technet.microsoft.com/en-us/library/jj899886.aspx http://technet.microsoft.com/en-us/library/5de72fb5-e1e3-43a7-a176-d17cdf4d312e