Cisco 352-001 Online Practice Questions and Exam Preparation

Cisco 352-001 Online Questions & Answers

• Question 281:

  On a large enterprise security solution, which two options are IDS or IPS modes of operation? (Choose two.)

  A. transparent mode
  B. promiscuous mode
  C. traffic discovery mode
  D. routed mode
  E. inline mode
  B. promiscuous mode
  E. inline mode

• Question 282:

  Which are two data plane hardening techniques? (Choose two)

  A. Infrastructure ACLs
  B. Control Plane Policing
  C. Redundant AAA servers
  D. Disable unused services
  E. Routing protocol authentication
  F. SNMPv3
  G. Warning banners
  A. Infrastructure ACLs
  B. Control Plane Policing

• Question 283:

  A customer uses OSPF and BGP in their network. Which solution will continue forwarding packets during a temporary failure of a P node?

  A. Deploy MPLS TE
  B. Enable BGP Flowspec
  C. Enable NSF/GR for OSPF
  D. Deploy IS-IS an IGP instead of OSPF
  A. Deploy MPLS TE

• Question 284:

  Company ABC is using an Ethernet virtual circuit as its provider's DCI solution. A goal is to reduce the time to detect the link failure. Which protocol accomplishes this goal?

  A. link aggregation group
  B. Ethernet OAM
  C. UDLD
  D. spanning-tree bridge assurance
  B. Ethernet OAM

• Question 285:

  You are designing a network that includes IP QoS. Which two architectures could be used to ensure that IP QoS is implemented properly? (Choose two.)

  A. Differentiated Services, where the user, with the assistance of the RSVP signaling protocol, reserves the resources end to end before sending the data
  B. Integrated Services, where the user, with the assistance of the RSVP signaling protocol, reserves the resources end to end before sending the data
  C. Integrated Services, which relies on the information carried within each packet to make resource-allocation decisions at each network node
  D. Differentiated Services, which relies on the information carried within each packet to make resource allocation decisions at each network node
  E. Integrated Services, where the user, with the assistance of the DSCP signaling protocol, reserves the resources end to end before sending the data
  B. Integrated Services, where the user, with the assistance of the RSVP signaling protocol, reserves the resources end to end before sending the data
  D. Differentiated Services, which relies on the information carried within each packet to make resource allocation decisions at each network node

• Question 286:

  

  Refer to the exhibit. Company ABC is a Tier 3 service provider that offers Layer 2 and Layer 3 transport for small/medium enterprise customers in the US. Most of their network is built on Layer 2 MPLS circuits from a Tier 1 provider. Many Company ABC customers are using overlay VPN technologies and independent routing protocols, and they are affected with unacceptable convergence time after every major outage in the core of the Tier 1 provider.

  Which long-term redesign increases network availability?

  A. Customers replace their own overlay VPN service with the Company ABC Layer 3 VPN service.
  B. Customers fine tune their routing protocol for faster convergence
  C. Company ABC replaces the Layer 2 MPLS circuit from the Tier 1 service provider with dark fiber/DWDM-based transport.
  D. Company ABC should adopt a full-mesh POP connectivity.
  D. Company ABC should adopt a full-mesh POP connectivity.

• Question 287:

  In order to meet your service level agreement, your network designer created a design solution that includes interface dampening. In which two ways will interface dampening benefit your overall network design? (Choose two.)

  A. Interface dampening uses an exponential backoff algorithm to suppress event reporting to the upper-level protocols.
  B. When the interface is dampened, further link events are not reported to the upper protocol modules.
  C. When the interface is dampened, further link events are reported to the upper protocol module.
  D. Periodic interface flapping that affects the routing system as a whole should have a period shorter than the system convergence time.
  A. Interface dampening uses an exponential backoff algorithm to suppress event reporting to the upper-level protocols.
  B. When the interface is dampened, further link events are not reported to the upper protocol modules.

• Question 288:

  A designer is working with a large bank to redesign their network. The designer wants to minimize complaints regarding slow application response times across the WAN. It is suspected that currently traffic is not being classified and marked correctly somewhere in the network. Which tool should the designer recommend to validate quality of service mappings and use?

  A. SNMP
  B. IPFIX
  C. IP SLA
  D. protocol analyzer
  E. NBAR
  B. IPFIX

• Question 289:

  

  Refer to the exhibit. Router A must reach Router X. Which option describes how router A decides which interface to use to forward packets?

  A. Router A does per-flow load-balance across the two interfaces.
  B. Router A relies on RIB toselect the desired interface.
  C. Router A relies on FIBto select the desired interface.
  D. Router A does per-packet load-balance across the two interfaces.
  B. Router A relies on RIB toselect the desired interface.

• Question 290:

  You are designing a new multisite data center network within the same city. You are using the newest routers that run OSPF and DWDM point-to-point interfaces for site-to-site connectivity. Your primary objective is to use the fastest possible method for interface failure detection. Which method achieves this objective?

  A. UDLD
  B. Interface event dampening
  C. LoS/AIS event faults
  D. Fast-hello timers
  C. LoS/AIS event faults