1. Home
  2. Cisco
  3. 351-080

Cisco 351-080 Online Practice Questions and Exam Preparation

351-080 Exam Details

  • Exam Code
    :351-080
  • Exam Name
    :CCIE Data Center Written
  • Certification
    :Cisco Certifications
  • Vendor
    :Cisco
  • Total Questions
    :473 Q&As
  • Last Updated
    :Dec 16, 2021

Cisco 351-080 Online Questions & Answers

  • Question 311:

    What is the difference between the Ethanalyzer and the SPAN feature in Cisco NX-OS?

    A. The Ethanalyzer captures control-plane traffic, while SPAN captures all traffic.
    B. The Ethanalyzer captures all traffic including control-plane traffic, while SPAN captures only the control-plane traffic.
    C. The Ethanalyzer captures only data traffic, while SPAN captures all traffic.
    D. The Ethanalyzer captures only control traffic, while SPAN captures data traffic.

  • Question 312:

    Which three statements best describe HSRP configuration on Cisco Nexus switches? (Choose three.)

    A. In a vPC topology, the primary HSRP router will respond to ARP requests, but both HSRP routers will forward data traffic. No additional configuration is required.
    B. In a vPC topology, the primary HSRP router will respond to ARP requests, but both HSRP routers will forward data traffic if the peer-gateway feature is enabled.
    C. You can configure two overlapping HSRP groups to load share traffic from the connected hosts while providing the default router redundancy.
    D. You can use the show standby command to verify HSRP operation and configuration.
    E. If you remove the feature hsrp command, all relevant HSRP configuration information is also removed.

  • Question 313:

    Refer to the exhibit.

    You are setting up a service profile to iSCSI boot using a Cisco UCS VIC 1240. The service profile returns a configuration error when you attempt to associate it. What is the problem, based on the exhibit?

    A. The iSCSI adapter policy is not set.
    B. iSCSI boot will not work with the default VLAN.
    C. The default VLAN should not be set as native on the overlay vNIC.
    D. The MAC address assignment is invalid.

  • Question 314:

    Refer to the exhibit.

    Assume that there is no disjoint Layer 2 configuration. Based on the output, what will happen if uplink eth1/7 on FI-A fails?

    A. The host will lose Ethernet uplink connectivity on FI-A.
    B. Fabric failover will force the vNIC that is bound to FI-A to use uplink eth1/7 on FI-B.
    C. Cisco UCS Manager will disable the host vNIC that is connected to FI-A.
    D. Traffic from any hosts using this pin group will use e1/8 on FI-A.

  • Question 315:

    Refer to the exhibit.

    Which three statements describe the use of the vPC peer link in this topology? (Choose three.)

    A. The peer link is used for synchronizing MAC addresses between SW1 and SW2.
    B. The peer link is used for control plane traffic only.
    C. The peer link provides necessary transport for multicast traffic.
    D. The peer link is used for the communication of orphaned ports.
    E. The peer link does not prevents the loops in the topology.
    F. The peer link always consists of two 10GB ports in a port-channel.

  • Question 316:

    In the basic DNS resolution process, which component receives the query and sends it to the location that knows the IP address for the destination?

    A. DNS resolver
    B. D-proxy
    C. root server
    D. intermediate server
    E. authoritative server

  • Question 317:

    You can install Cisco DCNM-LAN on a supported version of which two operating systems? (Choose two.)

    A. Microsoft Windows Server
    B. Novell SUSE Linux Enterprise Server
    C. Oracle Enterprise Linux
    D. Red Hat Enterprise Linux
    E. Vmware ESX

  • Question 318:

    On a Cisco Unified Computing System (UCS), which two statements regarding Ethanalyzer are true? (Choose two.)

    A. Interface inbound-low handles Rx and Tx of low-priority control packet
    B. Interface inbound-lo handles Rx and Tx of high-priority control packet
    C. Interface inbound-low maps to internal interface eth3
    D. Interface inbound-low maps to internal interface eth4

  • Question 319:

    What is required for Cisco UCS C-Series rack server integration with Cisco UCS Manager? (Choose three.)

    A. Cisco UCS Manager 1.3(xx) or later and a pair of Nexus 2248 FEXes
    B. Cisco UCS Manager 2.0(2xx) or later and a pair of Nexus 2232 FEXes
    C. Two Cisco UCS 6100 Series or 6200 Series fabric interconnects
    D. Two RJ45 Ethernet cables
    E. The fabric interconnects must be in end-host mode

  • Question 320:

    Refer to the exhibit.

    An ESX host is added to a distributed switch but is never seen as a module in VSM. Given below configuration from VSM, what is the cause of this issue? (Choose two.) VSM# show svs domain SVS domain config: Domain iD. 111 Control vlan: 500 Packet vlan: 501 L2/L3 Control modE. L2 L3 control interfacE. NA Status: Config push to VC successful.

    A. Missing VLAN 500 on Switch1 trunk to Switch2
    B. Missing VLAN 501 on Switch1 trunk to Switch 2
    C. VLAN 500 is not created on Switch2
    D. Interface VLAN 500 is missing on Switch1
    E. Interface VLAN 501 is missing on Switch1
    F. VLAN 111 is missing on all switches

Related Exams:

Tips on How to Prepare for the Exams

Nowadays, the certification exams become more and more important and required by more and more enterprises when applying for a job. But how to prepare for the exam effectively? How to prepare for the exam in a short time with less efforts? How to get a ideal result and how to find the most reliable resources? Here on Vcedump.com, you will find all the answers. Vcedump.com provide not only Cisco exam questions, answers and explanations but also complete assistance on your exam preparation and certification application. If you are confused on your 351-080 exam preparations and Cisco certification application, do not hesitate to visit our Vcedump.com to find your solutions here.