Cisco 351-080 Online Practice Questions and Exam Preparation

Cisco 351-080 Online Questions & Answers

• Question 331:

  Which of these commands will allow you to set end-host mode for SAN connectivity?

  A. UCS-A # scope fc-uplink UCS-A /fc-uplink # set mode end-host UCS-A /fc-uplink* # commit-buffer
  B. UCS-A# scope eth-uplink UCS-A /eth-uplink # set mode end-host WarninG. When committed, this change will cause the switch to reboot UCS-A /eth-uplink* # commit-buffer
  C. UCS-A# scope fabric-interconnect a UCS-A /fabric-interconnect # set mode end-host UCS-A /fabric-interconnect* # commit-buffer
  D. UCS-A# scope system UCS-A /system* # set mode end-host UCS-A /system* # commit-buffer
  A. UCS-A # scope fc-uplink UCS-A /fc-uplink # set mode end-host UCS-A /fc-uplink* # commit-buffer

• Question 332:

  Which statement about Cisco Unified Fabric switches is correct?

  A. The Nexus 5000 family of switches does not support vPC when running in either NPV or FCoE NPV mode.
  B. The MDS 9100 family of switches is an excellent design choice as a Unified Fabric edge switch.
  C. The Nexus 7000 Series Switches can support the NPIV mode of operation, but cannot function as a complete Fibre Channel Forwarder.
  D. The Nexus 7000 Series Switches cannot support advanced Cisco Fibre Channel features such as IVR.
  E. The MDS family of Cisco Unified Fabric switches supports both the Fibre Channel Forwarder and Fibre Channel Bridge functions.
  E. The MDS family of Cisco Unified Fabric switches supports both the Fibre Channel Forwarder and Fibre Channel Bridge functions.

• Question 333:

  When using Overlay Transport Virtualization (OTV), how do L2 multicast frames traverse the overlay?

  A. The L2 multicast frames are encapsulated in an OTV packet using the configured control-group multicast address for transport
  B. The L2 multicast frames are dropped because multicast cannot be carried across the overlay
  C. The L2 multicast frames are encapsulated in an OTV packet using the configured data- group multicast address for transport
  D. The L2 multicast frames are forwarded natively across the overlay based on their multicast IDs
  C. The L2 multicast frames are encapsulated in an OTV packet using the configured data- group multicast address for transport

• Question 334:

  Which two statements about NPIV are true? (Choose two.)

  A. After enabling NPIV, switch interfaces can only be placed into NP, F, or SD modes of operation.
  B. NPV devices log in to NPIV devices.
  C. NPIV requires the Enterprise License Package.
  D. NPIV is supported on the Cisco MDS, N7K, and N5K families of switches.
  E. A director class switch should not be placed into NPIV mode.
  B. NPV devices log in to NPIV devices.
  D. NPIV is supported on the Cisco MDS, N7K, and N5K families of switches.

• Question 335:

  Which Cisco Nexus 1000v switch CLI command is used to verify the connection between the Cisco Nexus 1000v Series switch and Vmware?

  A. show module
  B. show svd console
  C. show svs connections
  D. show svs domain
  E. show svd domain
  C. show svs connections

• Question 336:

  By default, what type of SSH server key is generated by Cisco NX-OS Software?

  A. DSA key generated with 512 bits
  B. RSA key generated with 768 bits
  C. RSA key generated with 1024 bits
  D. DSA key generated with 1024 bits
  E. RSA key generated with 2048 bits
  C. RSA key generated with 1024 bits

• Question 337:

  Refer to the exhibit.

  

  During troubleshooting of vPCs, it is observed that virtual port channel 2 is in the down state. Based on the show command output, what is a possible cause of this issue?

  A. The virtual port channel is down because LACP is not enabled on the remote switch.
  B. The virtual port channel is down because of a VLAN mismatch.
  C. The virtual port channel is down because of an MTU mismatch.
  D. The virtual port channel is down because of a VLAN and MTU mismatch.
  C. The virtual port channel is down because of an MTU mismatch.

• Question 338:

  On the Cisco Nexus 7000 switch, ACL capture sessions are supported on which two modules? (Choose two.)

  A. M1 modules
  B. M2 modules
  C. F1 modules
  D. F2 modules
  E. M3 modules
  A. M1 modules
  B. M2 modules

• Question 339:

  Cisco FabricPath uses what as a common bridge ID to connected Spanning Tree Protocol bridges?

  A. C84C.75FA.6000
  B. 0100.5E11.02FD
  C. C84C.76FA.6000
  D. 4000.0000.0001
  A. C84C.75FA.6000

• Question 340:

  Drag Drop

  Select and Place: