Cisco 351-080 Online Practice Questions and Exam Preparation

Cisco 351-080 Online Questions & Answers

• Question 281:

  Which two statements about Fibre Channel over TCP/IP are true? (Choose two.)

  A. A connection request is made to Port 3225 or configured port.
  B. A connection request is made to Port 3260 or configured port.
  C. Fibre Channel over TCP/IP uses the TCP window management and sliding window for flow control.
  D. A special frame is always used to identify peers.
  A. A connection request is made to Port 3225 or configured port.
  C. Fibre Channel over TCP/IP uses the TCP window management and sliding window for flow control.

• Question 282:

  Virtual PortChannels (vPCs) allow links that are physically connected to two different Cisco switches to appear to a third downstream device as coming from a single device and as part of a single port channel. Which of the following are components of a Virtual PortChannel system? (Choose four)

  A. Two peer devices: the vPC peers of which one is primary and one is secondary and are part of a vPC domain.
  B. A Layer 3 Gigabit Ethernet link called peer-keepalive link to resolve dual-active scenarios
  C. A redundant 10 Gigabit Ethernet PortChannel called a peer link to carry traffic from one system to the other when needed
  D. vPC member ports forming the PortChannel
  E. A dot1q trunk between the vPC peers
  F. A management port that can be used as peer-keepalive link to resolve dual-active scenarios.
  A. Two peer devices: the vPC peers of which one is primary and one is secondary and are part of a vPC domain.
  B. A Layer 3 Gigabit Ethernet link called peer-keepalive link to resolve dual-active scenarios
  C. A redundant 10 Gigabit Ethernet PortChannel called a peer link to carry traffic from one system to the other when needed
  D. vPC member ports forming the PortChannel

• Question 283:

  Lossless Ethernet for FCoE is achieved through the use of which features? (Choose two.)

  A. Priority flow control
  B. Buffer-to-buffer credits
  C. TCP retransmission
  D. Ethernet checksum
  E. QoS policies
  A. Priority flow control
  E. QoS policies

• Question 284:

  Which four port types are included in the VLAN port count? (Choose four.)

  A. border uplink Ethernet ports
  B. border uplink EtherChannel member ports
  C. FCoE ports in a SAN cloud
  D. static and dynamic vNICs created through service profiles
  E. VLANs
  F. VSANs
  G. Private VSANs
  H. Private VLANs
  A. border uplink Ethernet ports
  B. border uplink EtherChannel member ports
  C. FCoE ports in a SAN cloud
  D. static and dynamic vNICs created through service profiles

• Question 285:

  Drag Drop

  Select and Place:

  

  

• Question 286:

  Which statement is true about DHCP snooping on the Cisco Nexus 7000 platform?

  A. DHCP snooping cannot be enabled globally and on a per-VLAN basis.
  B. By default, DHCP snooping is disabled globally and on all VLANs.
  C. You can enable DHCP snooping on a single VLAN only.
  D. For DHCP snooping to function properly, all DHCP servers must be connected to the device through untrusted interfaces.
  B. By default, DHCP snooping is disabled globally and on all VLANs.

• Question 287:

  Which mechanism do the CNA and the Cisco Nexus 5000 Series Switches use to provide a lossless class of Ethernet traffic?

  A. LLDP
  B. LACP
  C. PFC
  D. FIP
  C. PFC

• Question 288:

  Which two statements about end-host mode are true? (Choose two.)

  A. In end-host mode, if a vNIC is hard pinned to an uplink port and this uplink port goes down, the system repms the vMIC, and the vNIC go
  B. End-host mode allows the fabric in interconnect to act as an end host to the network, representing all servers (hosts) connected to it through vNICs.
  C. End-host mode is the default Ethernet switching mode.
  D. In end-host mode, the fabric interconnect runs the 5pann,ng Tree Protocol to avoid loops.
  E. In end-host mode, if a vNIC is hard pinned to an uplink port and this uplink port goes down, the system repins the vNIC but the vNIC remain down until manual intervention.
  B. End-host mode allows the fabric in interconnect to act as an end host to the network, representing all servers (hosts) connected to it through vNICs.
  C. End-host mode is the default Ethernet switching mode.

• Question 289:

  Refer to the exhibit.

  

  Which option describes the capability that the FCoE setting allows?

  A. configures the FEX to send FCoE traffic only to this switch
  B. allows mapped VLAN-VSAN traffic to reach the FEX
  C. configures FEX for A-B SAN capabilities
  D. allows interface Ethernet 101/1/1 to exchange DCBX information
  A. configures the FEX to send FCoE traffic only to this switch

• Question 290:

  Which three management tools are available with DCNM-SAN Manager, Device Manager, and Performance Manager? (Choose three.)

  A. Cisco Traffic Analyzer
  B. Cisco Protocol Analyzer
  C. Cisco Port Analyzer Adapter 2
  D. Cisco Prime LMS
  E. Cisco Prime NCS
  F. Cisco Prime NMS
  A. Cisco Traffic Analyzer
  B. Cisco Protocol Analyzer
  C. Cisco Port Analyzer Adapter 2