Cisco 351-080 Online Practice Questions and Exam Preparation

Cisco 351-080 Online Questions & Answers

• Question 261:

  On a Nexus 5000 Series Switch, when a VFC is not online, what are the causes? (Choose three.)

  A. LLDP transmit and receive are disabled
  B. The initiator server has no connectivity to the target storage
  C. FIP negotiation timing
  D. Peer does not support LLDP
  E. VSAN trunk protocol has been enabled
  A. LLDP transmit and receive are disabled
  B. The initiator server has no connectivity to the target storage
  D. Peer does not support LLDP

• Question 262:

  Refer to the exhibit.

  

  What is the purpose of this command on the Cisco Nexus 7000 switch?

  A. The command enables conversational learning on FabricPath VLANs 1 through 10 for the F Series module.
  B. The command enables the FabricPath protocol on VLANs 1 through 10.
  C. There is no need for this command because conversational learning is enabled by default for all VLANs.
  D. The command enables conversational learning on a classic Ethernet VLAN for the F Series module.
  D. The command enables conversational learning on a classic Ethernet VLAN for the F Series module.

• Question 263:

  A Host connected to an NPV switch is not able to see the storage connected to the core switch. Given the output of the show command below, what is the reason of this issue?

  switch# show npv status

  npiv is enabled

  External Interfaces:

  ===============

  InterfacE. fc1/1, VSAN: 1, FCID. 0x000000, StatE. Other

  Number of External Interfaces: 4

  A. NPV is not enabled on the core switch?
  B. The interface connected to the Core switch is in admin down state
  C. The local host interface belongs to the wrong VSAN?
  D. The local host interface is not able to login
  B. The interface connected to the Core switch is in admin down state

• Question 264:

  Refer to the exhibit.

  

  vPC+ is configured between which switches?

  A. Switch-ID 13 and Switch-ID 23
  B. Switch-ID 11 and Switch-ID 12 C. Switch-ID 100 only
  D. Switch-ID 13 and Switch-ID 100
  A. Switch-ID 13 and Switch-ID 23

• Question 265:

  NPV and NPIV are features that are used to overcome resource limitations in which Fibre Channel field?

  A. FCID
  B. Domain ID
  C. WWPN
  D. LUN ID
  E. VSAN
  B. Domain ID

• Question 266:

  You plan to add a new VLAN to your updating service profile template. Assuming that the default maintenance policy is configured, which statement about applying this change is true?

  A. The change will be applied immediately once the blade is rebooted.
  B. The change will be deferred until the user acknowledges.
  C. The change will be applied immediately with no disruption to any bound service profiles.
  D. The change will generate an impact summary message.
  E. The change will require all bound service profiles to be unbound.
  C. The change will be applied immediately with no disruption to any bound service profiles.

• Question 267:

  Which two statements about VDC configuration and limitations are true? (Choose two.)

  A. Standard VDCs cannot share interfaces, VLANs, or VRF tables.
  B. Any user can create VDCs.
  C. Only the network administrator role can use the switchto vdc command.
  D. After a network administrator uses the switchto vdc command, the network administrator becomes a VDC administrator for the new VDC.
  E. There is no CLI command to return to the original VDC.
  A. Standard VDCs cannot share interfaces, VLANs, or VRF tables.
  D. After a network administrator uses the switchto vdc command, the network administrator becomes a VDC administrator for the new VDC.

• Question 268:

  DCNM is capable of monitoring the network performance of a SAN. What are the three primary areas of this operation?

  A. Analyze traffic, device management, and network monitoring
  B. DCNM-SAN, DCNM-LAN, and device manager
  C. Definition of flows, information collection, and data presentation
  D. SNMP poll data, MIB analysis, and report generation
  C. Definition of flows, information collection, and data presentation

• Question 269:

  Refer to the components below.

  Cisco UCS 6100 Fabric Interconnect Cisco Nexus 1000V Cisco UCS 5100 Blade Chassis

  Which data center design layer contains these components?

  A. the Virtualization layer
  B. the Management layer
  C. the Compute layer
  D. the Services layer
  C. the Compute layer

• Question 270:

  Refer to the exhibit.

  

  The servers in this network are connected to an A-B SAN design. What is required for hosts to support a high-availability Fibre Channel connection to a storage controller?

  A. Multipath drivers should be installed on all the servers.
  B. Multipath drivers should be installed on the CNA of S1 and S3.
  C. High availability for Fibre Channel is controlled by the storage controller, and there is no need to add or make changes on the server side.
  D. S1 and S3 require that multipath drivers are installed, but S2 does not.
  E. Multipath drivers should be installed on all CNAs of all servers.
  A. Multipath drivers should be installed on all the servers.