Cisco 351-080 Online Practice Questions and Exam Preparation

Cisco 351-080 Online Questions & Answers

• Question 201:

  Refer to the exhibit.

  

  You have associated a newly created service profile to a blade. When you examine the configured boot order and actual boot order, they do not match. Which two statements describe reasons for this mismatch? (Choose two.)

  A. Having a single iSCSI boot target would prevent the profile from associating, and would generate a configuration error.
  B. The server must complete a POST cycle before Cisco UCS Manager will update this information.
  C. The blade needs to be reacknowledged.
  D. The server is in the process of a firmware upgrade.
  E. There may be a configuration error in the service profile.
  B. The server must complete a POST cycle before Cisco UCS Manager will update this information.
  E. There may be a configuration error in the service profile.

• Question 202:

  How many traffic monitoring sessions can you create on Cisco UCS Manager?

  A. 16
  B. 8
  C. 24
  D. 32
  A. 16

• Question 203:

  On a Cisco Nexus 7000 Series Switch, what is the purpose of this command?

  Switch# config terminal

  switch(config)# mac address-table learning-mode conversational vlan 1-10

  switch(config)#

  A. Enable conversational learning on FabricPath vlans 1-10 for F-Series module
  B. Enable FabricPath protocol on VLANs 1?0
  C. No need for this command as conversational learning is enabled by default for all VLANs.
  D. Enable conversational learning on Classical Ethernet VLAN for F-Series module
  A. Enable conversational learning on FabricPath vlans 1-10 for F-Series module

• Question 204:

  In DCBX feature negotiation, the switch and CNA exchange capability information and configuration values. Which three capabilities are supported in Cisco Nexus 5000 Series Switches? (Choose three.)

  A. PFC
  B. support for logical link up or down
  C. FCoE
  D. multicast
  E. speed
  F. duplex
  A. PFC
  B. support for logical link up or down
  C. FCoE

• Question 205:

  Which two options are advantages of deploying Ethernet-based FCoE switches such as the Cisco Nexus 7000 Series Switches beyond the access layer? (Choose two)

  A. lower overall throughput compared to native Fibre Channel switches
  B. flexibility to support file (NAS) and block (iSCSI and FCoE) storage traffic
  C. High-performance Ethernet-based FCoE switches cannot be used in a dedicated SAN core.
  D. requirement for traffic isolation with dedicated links and storage VDCs is no longer required.
  E. plans that include 40 and 100 Gigabit Ethernet speeds
  B. flexibility to support file (NAS) and block (iSCSI and FCoE) storage traffic
  E. plans that include 40 and 100 Gigabit Ethernet speeds

• Question 206:

  Which three options are types of iSCSI node names? (Choose three.)

  A. extended unique identifier
  B. extended qualified name
  C. iSCSI qualified name
  D. network qualified name
  E. iSCSI unique identifier
  F. network address authority
  A. extended unique identifier
  C. iSCSI qualified name
  F. network address authority

• Question 207:

  Which three options are valid SPAN sources? (Choose three.)

  A. VLANs, because when a VLAN is specified as a SPAN source, all supported interfaces in the VLAN are SPAN sources
  B. fabric port channels connected to the Cisco Nexus 2000 Series Fabric Extender
  C. Layer 2 subinterfaces
  D. satellite ports and host interface port channels on the Cisco Nexus 2000 Series Fabric Extender
  E. Layer 3 subinterfaces
  F. Remote Span Ethernet Ports
  A. VLANs, because when a VLAN is specified as a SPAN source, all supported interfaces in the VLAN are SPAN sources
  B. fabric port channels connected to the Cisco Nexus 2000 Series Fabric Extender
  D. satellite ports and host interface port channels on the Cisco Nexus 2000 Series Fabric Extender

• Question 208:

  What is the benefit of the Priority-Based Flow control feature in Data Center Bridging?

  A. provides the capability to manage a bursty, single traffic source on a multiprotocol link
  B. enables bandwidth management between traffic types for multiprotocol links
  C. addresses the problem of sustained congestion by moving corrective action to the network edge
  D. allows autoexchange of Ethernet parameters between switches and endpoints
  A. provides the capability to manage a bursty, single traffic source on a multiprotocol link

• Question 209:

  Which statement is correct about the number of available QoS system classes in FCoE?

  A. It's hard-set and cannot be disabled
  B. It's configurable, with an upper limit of 16
  C. It's hard-set but cannot disable best-effort and Fibre Channel
  D. It's hard-set but can disable all but one class
  E. It's configurable with an upper limit of eight
  C. It's hard-set but cannot disable best-effort and Fibre Channel

• Question 210:

  Refer to the exhibit.

  

  Which command would produce this output?

  A. show stats HTTP
  B. show stats load balance
  C. show stats probe type
  D. show parameter map
  B. show stats load balance