Cisco 351-080 Online Practice Questions and Exam Preparation

Cisco 351-080 Online Questions & Answers

• Question 121:

  VLAN configuration using DCNM can be completed by which two supported methods? (Choose two.)

  A. Copy and paste the VLAN, along with its VLAN ID, name, type, admin state, and admin status, from one device to another.
  B. Create a single VLAN or a range of VLANs.
  C. A VLAN is created only after choosing File > Deploy to apply changes.
  D. After a VLAN is created, it requires the state to be enabled.
  E. Modify the existing VLAN by choosing Interface > VLAN > VLAN Settings.
  A. Copy and paste the VLAN, along with its VLAN ID, name, type, admin state, and admin status, from one device to another.
  B. Create a single VLAN or a range of VLANs.

• Question 122:

  KAL-AP on the Cisco ACE allows communication with Cisco ACE Global Site Selector, to report virtual IP and real server availability. Which statement is true about KAL-AP?

  A. It is a Cisco propriety keepalive.
  B. It supports a maximum of 256 KAL-AP entries.
  C. It supports a maximum of 256 KAL-AP keepalives.
  D. It is used for both Cisco and non-cisco load balancers
  A. It is a Cisco propriety keepalive.

• Question 123:

  Which two options describe the results of a switch sending an RCF SW_ILS frame to neighbor switches? (Choose two.)

  A. All traffic in all VSANs is suspended.
  B. Zone merging is reinitiated.
  C. The principal switch remains the same.
  D. New Fibre Channel domains can be allocated.
  E. The switch name is changed.
  B. Zone merging is reinitiated.
  D. New Fibre Channel domains can be allocated.

• Question 124:

  Which three options are valid ACE probes? (Choose three.)

  A. HTTP
  B. Telnet
  C. Java scripting
  D. TCL scripting
  E. XML scripting
  F. SSH
  A. HTTP
  B. Telnet
  D. TCL scripting

• Question 125:

  Refer to the exhibit.

  

  What is the most likely reason for the error?

  A. There are not enough local hard drives to satisfy the local disk configuration policy.
  B. One of the resource pools is depleted (WWN, MAC, UUID).
  C. The destination blade is equipped with an M61KR-B adapter.
  D. The server is not equipped with adequate memory.
  E. A User Ack maintenance policy has been applied.
  C. The destination blade is equipped with an M61KR-B adapter.

• Question 126:

  When using VSD, traffic flow goes from the virtual machine to which of these?

  A. Upstream switch
  B. Virtual Supervisor Module
  C. VMware distributed switch
  D. VMware vSwitch
  E. Service virtual machine
  E. Service virtual machine

• Question 127:

  Basic zoning changes are accomplished through the use of four SW_ILS frames. Which option identifies these frames in the correct order?

  A. RCA, UFC, SFC, ACA
  B. ACA, RCA, SFC, UFC
  C. SFC, UFC, ACA, RCA
  D. ACA, SFC, UFC, RCA
  E. UFC, SFC, RCA, ACA
  D. ACA, SFC, UFC, RCA

• Question 128:

  Which three flow-control port states lead to enabled link flow control? (Choose three.)

  A. Receive port: Enabled, Transmit port: Enabled
  B. Receive port: Enabled, Transmit port: Desired
  C. Receive port: Enabled, Transmit port: Disabled
  D. Receive port: Disabled, Transmit port: Desired
  E. Receive port: Desired, Transmit port: Desired
  A. Receive port: Enabled, Transmit port: Enabled
  B. Receive port: Enabled, Transmit port: Desired
  E. Receive port: Desired, Transmit port: Desired

• Question 129:

  Which three statements best describe the Cisco Unified Fabric solution for the data center? (Choose three.)

  A. Cisco Nexus 5000 Series Switches provide the capability to consolidate LAN and SAN traffic on a unified fabric over Ethernet.
  B. The unified fabric is delivered throug h technologies such as FCoE and DCB.
  C. FCoE allows transmission of Fibre Channel traffic over Ethernet by encapsulating native Fibre Channel frames into GRE and transporting them across the Ethernet network.
  D. FCoE allows consolidating Fibre Channel traffic from multiple VSANs into the same Ethernet VLAN to be transported across the fabric. PFC ensures lossless transport of the FC traffic over Ethernet.
  E. PFC allows user priorities to be defined on a single physical link, each of which can have its own logical lane that can be paused independently of the others.
  A. Cisco Nexus 5000 Series Switches provide the capability to consolidate LAN and SAN traffic on a unified fabric over Ethernet.
  B. The unified fabric is delivered throug h technologies such as FCoE and DCB.
  E. PFC allows user priorities to be defined on a single physical link, each of which can have its own logical lane that can be paused independently of the others.

• Question 130:

  Which two options describe devices as they operate in FabricPath topologies? (Choose two.)

  A. Edge (or leaf) devices: These devices have ports that are connected to classic Ethernet devices (servers, firewalls, router ports, and so on) and ports that are connected to the FabricPath cloud (or FabricPath ports). Edge devices are able to map a MAC address to the destination switch ID.
  B. Spine devices: These devices exclusively interconnect edge devices. Spine devices switch exclusively based on the destination switch ID.
  C. Edge (or leaf) devices: These devices have ports that are connected to classic Ethernet devices (servers, firewalls, router ports, and so on) and ports that are connected to the FabricPath cloud (or FabricPath ports). Edge devices are able to map a source address to the destination switch ID.
  D. Spine devices: These devices exclusively interconnect edge devices. Spine devices switch exclusively based on the source switch ID.
  A. Edge (or leaf) devices: These devices have ports that are connected to classic Ethernet devices (servers, firewalls, router ports, and so on) and ports that are connected to the FabricPath cloud (or FabricPath ports). Edge devices are able to map a MAC address to the destination switch ID.
  B. Spine devices: These devices exclusively interconnect edge devices. Spine devices switch exclusively based on the destination switch ID.