Cisco 350-401 Online Practice Questions and Exam Preparation

Cisco 350-401 Online Questions & Answers

• Question 941:

  SIMULATION

  Guidelines

  This is a lab item in which tasks will be performed on virtual devices.

  1. Refer to the Tasks tab to view the tasks for this lab item.

  2. Refer to the Topology tab to access the device console(s) and perform the tasks.

  3. Console access is available for all required devices by clicking the device icon or using the tab(s) above the console window.

  4. All necessary preconfigurations have been applied.

  5. Do not change the enable password or hostname for any device.

  6. Save your configurations to NVRAM before moving to the next item.

  7. Click Next at the bottom of the screen to submit this lab and move to the next question.

  8. When Next is clicked, the lab closes and cannot be reopened.

  Topology

  

  

  

  A. See the solution below in Explanation.
  B. Place Holder
  C. Place Holder
  D. Place Holder
  A. See the solution below in Explanation.

  ---

  Explanation

  SW10

  Conf t

  Default int e0/0

  Int e0/0

  No sh

  

  Conf t

  

  

  Copy run start

  Verification from PC2

  

  Show etherchannel summary

  

• Question 942:

  Which action is performed by Link Management Protocol In a Cisco StackWise Virtual domain?

  A. it determines if the hardware Is compatible to form the StackWise Virtual domain.
  B. It determines which switch becomes active or standby.
  C. It discovers the StackWise domain and brings up SVL interfaces.
  D. It rejects any unidirectional link traffic forwarding.
  D. It rejects any unidirectional link traffic forwarding.

  ---

  Explanation

  https://www.cisco.com/c/en/us/products/collateral/switches/catalyst-9000/nb-06-cat-9k-stack-wp-cte-en.pdf Page 7 Figure 6

  A: WRONG (SDP) It determines which switch becomes active or standby.

  B: WRONG (SDP) It determines if the hardware is compatible to form the StackWise Virtual domain.

  C: OK It rejects any unidirectional link traffic forwarding.

  D: WONRG ("Pre-parse configuration file") It discovers the StackWise domain and brings up SVL interfaces.

  The Link Management Protocol (LMP) is activated on each link of the StackWise Virtual link as soon as it is brought up online. The LMP performs the following functions:

  Verifies link integrity by establishing bidirectional traffic forwarding, and rejects any unidirectional links

• Question 943:

  Refer to the exhibit.

  

  Cloud deployments require less frequent upgrades than

  External users require HTTP connectivity to an internal company web server that is listening on TCP port 8080. Which command set accomplishes this requirement?

  

  External users require HTTP connectivity to an internal company web server that is listening on TCP port 8080. Which command set accomplishes this requirement?

  A. Option A
  B. Option B
  C. Option C
  D. Option D
  E. Option E
  B. Option B

• Question 944:

  Which JSON syntax is valid?

  A. {"switch": "name": "dist1", "interfaces": ["gig1", "gig2", "gig3"]}
  B. {/"switch/": {/"name/": "dist1", /"interfaces/": ["gig1", "gig2", "gig3"]}}
  C. {"switch": {"name": "dist1", "interfaces": ["gig1", "gig2", "gig3"]}}
  D. {`switch': (`name': `dist1', `interfaces': [`gig1', `gig2', `gig3'])}
  C. {"switch": {"name": "dist1", "interfaces": ["gig1", "gig2", "gig3"]}}

  ---

  Explanation

  This JSON can be written as follows:

  { 'switch': { 'name': 'dist1', 'interfaces': ['gig1', 'gig2', 'gig3']

  }

  }

• Question 945:

  You need to implement a First Hop Redundancy Protocol (FHRP) in a dual stack (IPv4 and IPV6) environment that utilizes devices from multiple different vendors. Which protocol best meets these needs?

  A. HSRP
  B. GLBP
  C. VRRPv1
  D. VRRPv2
  D. VRRPv2

  ---

  Explanation

  You have to go with VRRP as the protocol must be vendor agnostic.

• Question 946:

  By default, which virtual MAC address does HSRP group 16 use?

  A. c0:41:99:98:06:16
  B. 00:00:0c:07:ac:16
  C. 00:00:0c:07:ac:22
  D. c0:07:0c:ac:00:22
  B. 00:00:0c:07:ac:16

• Question 947:

  What is one fact about Cisco SD-Access wireless network deployments?

  A. The access point is part of the fabric underlay
  B. The WLC is part of the fabric underlay
  C. The access point is part the fabric overlay
  D. The wireless client is part of the fabric overlay
  C. The access point is part the fabric overlay

  ---

  Explanation

  Access Points + AP is directly connected to FE (or to an extended node switch) + AP is part of Fabric overlay

  https://www.ciscolive.com/c/dam/r/ciscolive/us/docs/2018/pdf/BRKEWN-2020.pdf

• Question 948:

  Which option works with a DHCP server to return at least one WLAN management interface IP address during the discovery phase and is dependent upon the VCI of the AP?

  A. Option 42
  B. Option 15
  C. Option 125
  D. Option 43
  D. Option 43

• Question 949:

  Refer to the exhibit.

  

  Which action results from executing the Python script?

  A. display the output of a command that is entered on that device in a single line
  B. SSH to the IP address that is manually entered on that device
  C. display the output of a command that is entered on that device
  D. display the unformatted output of a command that is entered on that device
  C. display the output of a command that is entered on that device

• Question 950:

  Refer to the exhibit.

  

  An administrator must collect basic statistics about the approximate amount of IPv4 and IPv6 flows entering Gi0/0 using NetFlow. However, the administrator is concerned that NetFlow processing during periods of high utilization on Gi0/0 will overwhelm the router CPU.

  Which configuration minimizes CPU impact and keeps the data flows across Gi0/0 intact?

  

  A. Option A
  B. Option B
  C. Option C
  D. Option D
  A. Option A